CME30E1600PZ ISC

Document overview

  • PDF pages: 1

Technical content

Page 1

isc Thyristors

CME30E1600PZ

PDF page 1 diagram

APPLICATIONS

  • It is suitable to fit all modes of control found in applications such as overvoltage crowbar protection,motor control circuits in power tools and kitchen aids,in-rush current limiting circuits,

. capacitive discharge ignition, voltage regulation circuits etc.

  • Minimum Lot-to-Lot variations for robust device performance and reliable operation

ABSOLUTE MAXIMUM RATINGS(Ta=25℃)

SYMBOL PARAMETER MIN UNIT
V DRM Repetitive peak off-state voltage 1600 V
V RRM Repetitive peak reverse voltage 1600 V
I T(AV) Average on-stage current 30 A
I TSM Surge non-repetitive on-state current @T =10ms P 260 A
P G(AV) Average gate power dissipation ,over any 20 ms period 165 W
T j Operating junction temperature -40~150 ℃
T stg Storage temperature -40~150 ℃

ELECTRICAL CHARACTERISTICS (TC=25℃ unless otherwise specified)

SYMBOL PARAMETER CONDITIONS MIN MAX UNIT
I RRM I /DRM Repetitive peak reverse current Repetitive peak off-state current VRM=VRRM,R GK= 220Ω, T=25℃ j 0.05 mA
T=125℃ j 2 mA
V TM On-state voltage I = 30A;T=25℃ TM j 1.92 V
I GT Gate-trigger current V = 6 V; I = 0.1 A D T 50 mA
V GT Gate-trigger voltage V = 6 V; I = 0.1 A D T 1.3 V
R th(j-c) Thermal resistance Junction to case 0.75 ℃/W
PDF page 1 diagram

NOTICE:

our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or

incidental damages.

isc website:www.iscsemi.com

isc & iscsemi is registered trademark