CMA80E1600HB ISC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

isc website:www.iscsemi.com isc & iscsemi isregisteredtrademark iscThyristors CMA80E1600HB

APPLICATIONS

  • Itissuitable tofitallmodes ofcontrol foundin applications suchas overvoltagecrowbar protection,motorcontrolcircuits inpower toolsandkitchen aids,in-rushcurrentlimiting circuits, capacitivedischarge ignition,voltageregulation circuits etc.
  • MinimumLot-to-Lotvariations forrobustdevice performance andreliable operation ABSOLUTE MAXIMUM RATINGS(Ta=25℃) SYMBOL PARAMETER MIN UNIT VDRM Repetitive peak off-state voltage 1600 V VRRM Repetitive peak reverse voltage 1600 V IT(AV) Average on-stage current 80 A IT(RMS) RMS on-state current 126 A ITSM Surge non-repetitive on-statecurrent TP=10ms 720 A PG(AV) Average gatepower dissipation 620 W Tj Operating junction temperature -40~150 ℃ Tstg Storage temperature -40~150 ℃ ELECTRICALCHARACTERISTICS (TC=25℃ unlessotherwise specified) SYMBOL PARAMETER CONDITIONS MIN MAX UNIT IRRM Repetitive peakreverse current VRM=VRRM Tj=25℃ 50 μA Tj=125℃ 3 mA IDRM Repetitive peakoff-state current VDM=VDRM Tj=25℃ 50 μA Tj=125℃ 3 mA VTM On-state voltage ITM=80A 1.47 V IGT Gate-triggercurrent VD =6V 80 mA VGT Gate-triggervoltage VD =6V 1.4 V Rth(j-c) Thermalresistance Junctionto case 0.2 ℃/W

isc website:www.iscsemi.com isc & iscsemi isregisteredtrademark iscThyristors CMA80E1600HB NOTICE: ISC reserves the rights to make changes of the content herein the datasheet at any time without notification. The information contained herein is presented only as a guide for the applications of our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.