CLX6F-AKB CREE

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 10

Technical content

© 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1391 REV 6 CLX6F-AKB: PLCC6 3 IN 1 SMD LED PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC6 package. These high reliability and high brightness LEDs are designed to work in a wide range of environmental condition and are ideally suited for use in illumination applications. Its wide viewing angle makes these LEDs ideally suited for channel letter, or general backlighting and illumination applications. The flat top emitting surface makes it easy for these LEDs to mate with light pipes.

FEATURES

  • Size (mm): 3.5 x 3.4 x 2.8
  • Dominant Wavelength: Amber (587.5-597.5nm)
  • Luminous Intensity (mcd) CLX6F-AKB:(3550-7100)
  • Water-Resistant (IPX8)*
  • Moisture Sensitivity Level: 5a
  • Lead-Free
  • RoHS Compliant
  • Matte Surface

APPLICATIONS

  • Architecture Lighting
  • Channel Letter
  • Backlight *:This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone. The leads area of the LED is not IPx8 rated and it’s required to insulate for moisture by customer in outdoor application.

CLX6F-AKB: PLCC6 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1391 REV 6 ABSOLUTE MAXIMUM RATINGS (T A = 25°C) Items Symbol Absolute Maximum Rating Unit Forward Current Note 1 IF 3 x 70 mA Peak Forward Current Note 2 IFP 3 x 200 mA Reverse Voltage VR 5 V Power Dissipation PD 3 x 196 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 °C Junction/Ambient 1 chip on RTHJA 270 °C/W Junction/Solder Point 1 chip on RTHJS 160 °C/W Electrostatic Discharge Classification (MIL-STD-883E) ESD 1000V Note: 1. Single-color light 2. Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25°C) Characteristics Condition Symbol Values Unit Dominant Wavelength IF = 3 x 50mA λDOM 587.5~597.5 nm Spectral bandwidth at 50% IREL max IF = 3 x 50mA Δ λ 24 nm Forward Voltage IF = 3 x 50mA VF(avg) 2.2 V VF(max) 2.8 V Luminous Intensity IF = 3 x 50mA IV(min) 3550 mcd IV(avg) 4700 mcd Luminous Flux(Reference) IF = 3 x 50mA ΦV(avg) 14.1 lm Reverse Current (max) VR = 5 V IR 10 μA * Continuous reverse voltage can cause LED damage.

CLX6F-AKB: PLCC6 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1391 REV 6 INTENSITY BIN LIMIT Amber(3 x 50 mA) - CLX6F-AKB Bin Code Min.(mcd) Max.(mcd) U 3550 4500 1f1g 4020 5020 V 4500 5600 1h1j 5020 6300 W 5600 7100 * Tolerance of measurement of luminous intensity is ±10% COLOR BIN LIMIT Amber (3 x 50 mA) - CLX6F-AKB Bin Code Min.(nm) Max.(nm) AF 587.5 592.5 AG 590 595 AH 592.5 597.5 * Tolerance of measurement of dominant wavelength is ±1 nm

CLX6F-AKB: PLCC6 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1391 REV 6 ORDER CODE TABLE Color Kit Number Luminous Intensity (mcd) Dominant Wavelength (nm) Package Min. Max. Color Bin Min.(nm) Color Bin Max.(nm) Amber CLX6F-AKB-CUWFH3 3550 7100 AF 587.5 AH 597.5 Reel Amber CLX6F-AKB-CU1FS3 Any 1 Intensity bin from U(3550) - W(7100) Any 1 hue bin from AF(587.5) - AH(597.5) Reel Notes:

  • The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable.
  • Please refer to the HB LED Lamp Reliability Test Standards document for reliability test conditions.
  • Please refer to the HB LED Lamp Soldering & Handling document for information about how to use this LED product safely.

CLX6F-AKB: PLCC6 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1391 REV 6 GRAPHS The data below are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

CLX6F-AKB: PLCC6 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1391 REV 6 GRAPHS The data below are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. ℃ ℃

CLX6F-AKB: PLCC6 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1391 REV 6 MECHANICAL DIMENSIONS All dimensions are in mm. NOTES RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product Ecology section of the Cree LED website. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. （ ） （ ） （ ） （ ） （ ） （ ）

CLX6F-AKB: PLCC6 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1391 REV 6 KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:

CLX6F-AKB: PLCC6 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1391 REV 6 REFLOW SOLDERING

  • The CLX6F-AKB is rated as a MSL 5a product.
  • The recommended floor life out of bag is 24hrs.
  • The temperature profile is as below. Use only with CLX6F-AKB Solder Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Ramp-down rate = 6ºC/s max Peak temperature = 250ºC max Time within 5ºC of actual Peak Temperature = 10s max Duration above 217ºC is 60s max
  • The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are required to handle with care. Never touch the resin surface of SMD products.
  • To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method is necessary:
  • Please refer to the HB LED Lamp Soldering & Handling document for information about how to use this LED product safely. Document No.: COTCO-05-0057 Rev. NO. : 13 Melting-point Pre-heat Soak Reflow Cooling Time Temperature Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Average ramp-up rate = 4ºC/s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Preheat time = 100s max. Preheat time = 100s max. Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max. Peak temperature = 230ºC max. Peak temperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration above 183ºC is 80s max. Duration above 217ºC is 80s max. Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): 0.5 7.5 7.0 4.5 2.6 1.5  Recommended solder pad design for heat dissipation (4-pin SMD LED) Document No.: CREE-05-0057 Rev. NO. : 16 pick up SMD products during the process of SMT production . If handling is necessary, it should take more careful to pick up these products. The following two methods are necessary : Fig. 1a: For Small Top SMD Fig. 1b: For Mini side 0.8mm SMD  For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products .Two figure size for reference : b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current  Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED.  Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of SMD LED.  All devices, equipment and machinery must be properly grounded.  It is recommended to perform electrical test to screen out ESD failures at final inspection.  It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED application. The current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice.

CLX6F-AKB: PLCC6 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1391 REV 6 PACKAGING

  • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
  • Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation.
  • The boxes are not water resistant, and they must be kept away from water and moisture.
  • The reel pack is applied in SMD LED.
  • Max 2800 pcs per reel.