CLF20E1200PB ISC
Document overview
- PDF pages: 1
Technical content
Page 1
isc Thyristors
CLF20E1200PB

APPLICATIONS
- It is suitable to fit all modes of control found in applications such as overvoltage crowbar protection,motor control circuits, capacitive discharge ignition, voltage regulation circuits etc.
- Minimum Lot-to-Lot variations for robust device performance and reliable operation.
ABSOLUTE MAXIMUM RATINGS(Ta=25℃)
| SYMBOL | PARAMETER | MIN | UNIT |
|---|---|---|---|
| V DRM | Repetitive peak off-state voltage | 1200 | V |
| V RRM | Repetitive peak reverse voltage | 1200 | V |
| I T(AV) | Average on-stage current | 20 | A |
| I T(RMS) | RMS on-state current | 31 | A |
| P G(AV) | Average gate power dissipation over any 20 ms period | 0.5 | W |
| T j | Operating junction temperature | -55~150 | ℃ |
| T stg | Storage temperature | -55~150 | ℃ |
ELECTRICAL CHARACTERISTICS (TC=25℃ unless otherwise specified)
| SYMBOL | PARAMETER | CONDITIONS | MIN | MAX | UNIT | |
|---|---|---|---|---|---|---|
| I RRM | Repetitive peak reverse current | VRM=VRRM | T=25℃ j | 100 | μA | |
| T=125℃ j | 0.5 | mA | ||||
| I DRM | Repetitive peak off-state current | VDM=VDRM | T=25℃ j | 100 | μA | |
| T=125℃ j | 0.5 | mA | ||||
| V TM | On-state voltage | I = 20A TM | 1.9 | V | ||
| I = 40A TM | 2.5 | V | ||||
| I GT | Gate-trigger current | V = 6 V; I = 0.1 A D T | 40 | mA | ||
| V GT | Gate-trigger voltage | V = 6 V; I = 0.1 A D T | 1.5 | V | ||
| R th(j-c) | Thermal resistance | Junction to case | 1 | ℃/W | ||

our products. ISC products are intended for usage in general electronic equipment. The products are not designed for use in equipment which require specialized quality and/or reliability, or in equipment which could have applications in hazardous environments, aerospace industry, or medical field. Please contact us if you intend our products to be used in these special applications. ISC makes no warranty or guarantee regarding the suitability of its products for any particular purpose, nor does ISC assume any liability arising from the application or use of any products, and specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.
isc website:www.iscsemi.com
isc & iscsemi is registered trademark