CFR TEC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Carbon film fixed Resistors
1773195 CIS WR 08/2015 Dimensions in
reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Key Features Low Cost – High Reliability High power to size ratio 5 power ratings – 0.25W ~ 2W
Applications
The resistive element comprises a thin film of carbon, deposited onto a high thermal conductivity ceramic core. Metal end caps are force fitted to the element prior to spiralling to value. Tinned copper lead wires are welded to the end caps and the components are then coated. One coat of phenolic resin is followed by three coats of epoxy resin. All resistors are tested for value and tolerance. Characteristics – Electrical CFR16 CFR25 CFR50 CFR100 CFR200 Rated power @ 70°C (W) 0.25 0.33 0.5 1 2 Resistance Range Ω Min 1R0 1R0 1R0 1R0 1R0 Max 4M7 10M 10M 10M 10M Tolerance (%) 2 5 Code Letter G J T.C.R. (PPM/°C) ≤10R ±350 11R-99K 0 ~ -450 100K-1M0 0 ~ -700 ≥1M1 0 ~ -1500 Selection Series E24 Limiting Element Voltage (V) 200 250 350 500 500 Max. Overload Voltage¹ (V) 400 500 700 1000 1000 Max Intermittent Overload Voltage²(V) 500 700 750 750 750 Operating temperature range -55 ~ +155 Climatic Category 55/155/56 Dielectric strength (V) 400 500 700 1000 1000 Insulation Resistance (MΩ) Min. 10000 ¹Maximum Overload Voltage is 2.5 times rated voltage up to the specified voltage for 5 seconds. ²Maximum Intermittent Overload Voltage is 4 times rated voltage up to the specified voltage for 1 second ON and 25 seconds OFF. >100R ONLY
Carbon film fixed Resistors reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Dimensions Type L¹max. D Max. D ±0.05 I ±3 CFR16 3.5 1.85 0.45 28 CFR25 6.8 2.5 0.54 28 CFR50 9.0 3.0 0.54 28 CFR100 12.0 5.0 0.70 25 CFR200 16.0 5.5 0.70 28 ¹Length is measured in accordance with IEC 294 Derating curve Surface Temperature vs Load
Carbon film fixed Resistors reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Marking Resistors are marked with a four colour band code in accordance with IEC 62 on a beige base colour Color 1st Figure 2nd Figure Multiplier Tolerance Letter Percent Black 0 0 1 Brown 1 1 10 F ±1% Red 2 2 100 G ±2% Orange 3 3 1,000 Yellow 4 4 10,000 Green 5 5 100,000 D ±0.5% Blue 6 6 1,000,000 C ±0.25% Violet 7 7 10,000,000 B ±0.1% Grey 8 8 100,000,000 White 9 9 1,000,000,000 Gold 0.1 J ±5% Silver 0.01 K ±10% None M ±20% Mounting The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. Packaging Carbon film resistors are normally supplied taped in 'ammo' boxes. Other sty les may be supplied on request. All tape specifications are in accordance with IEC 286-1. Type Box Quantity Std. Tape Spacing Component Spacing CFR16 5000 52 5 CFR25 4000 52 5 CFR50 3000 52 5 CFR100 1000 52 10 CFR200 1000 64 10
Carbon film fixed Resistors reference purposes only. Specifications subject to change For Email, phone or live chat, go to: www.te.com/help Performance Characteristics Ref QC 400 000 and QC 400 100 Test Ref Long term tests ±(5% +0.1Ω)
4.23 Climatic Sequence
4.24 Damp heat, steady state
4.25.1 Endurance @ 70°C
4.25.3 Endurance @ 155°C
Test Ref. Short term Tests ±(1% +0.05Ω)
4.13 Overload
4.16 Robustness of terminations
4.18 Resistance to soldering heat
4.19 Rapid change of temperature
4.22 Vibration
Common Part Size Tolerance Value CFR – Carbon Film Resistor 16 – 0.25W 25 – 0.33W 50 – 0.50W 100 – 1.00W 200 – 2.00W G – 2% J – 5% 1Ω - 1R0 1KΩ (1,000Ω) - 1K0 100KΩ(100,000Ω) – 100K 1MΩ(1,000,000Ω) – 1M0