CCM01-6101 ITT

Document overview

  • PDF pages: 3

Technical content

Page 1

PDF page 1 diagram

Construction

CCM01 MK III connectors are intended for applications such as pay TV, home

Insulator

shopping and utility meters. Mainly

Contacts Contact Finish

driven by the Set Top Box market for

PC tail plating

payment and/or deciphering.

Mechanical Data Mechanical life

Features

Card insertion force

  • Available in standard or reverse card

Card extraction force

reading version, with direct PCB

Contact force

soldering for reduced installation cost.

Vibration

  • Panel mount version comes with improved noise reduction FPC, to

Shock

accommodate all front panel configurations.

Contact Electrical Data

  • Double sided version allows the

Insulation resistance

customer to insert the card chip up or

Resistance

down for easier handling.

Current rating

  • Self cleaning card detection switch

Dielectric strength

(normally closed) is protected against assembly mishandling.

Switch Electrical Data

  • Available with 8 through hole contacts

Card detection switch

specifically designed to reduce card

Contact resistance

wear.

Dielectric strength

  • A chamfer opening to the card entry

Current rating

slot improves the card guidance into

Maximum power

the connector.

Environmental Data

  • Variable distance from lower card side to PCB to level card slot with your front Operating temperature panel design

Soldering temperature Damp heat

  • Easy insertion into PCB provided by

Salt mist

four half pegs and termination true positioning insulator.1

Ordering Code

  • Four snap in board locks to lower stress on soldered terminals and

Thermoplastic UL94V-0 rated Copper alloy Gold over nickel Tin lead (2µ min.)

30,000 cycles min 10 N max 1 N min /10 N max 0.20 N min / 0.60 N max Frequency 10 to 500 Hz. Acceleration 50m/s2 Duration 6 hours - amplitude 0,35 mm Max electrical discontinuity 1µs Peak value 500 m/s2 – Duration 11 ms 3 shocks in each direction of each axis Max electrical discontinuity 1 µs

1,000 MΩ min 100 mΩ max 10 µA min / 1 A max 750 Vrms min

Normally closed 100mΩ max 250 Vrms min 1 mA min / 10 mA max 0.2 VA

-20°C to +70°C Wave: 260°C / 5 seconds IEC 512 test number 11c (10 days) IEC 512 test number 11f (96 hours)

Designation Standard Version Reverse Version
Distance from lower card entrance & PCB
3,90 mm CCM01-6101 CCM01-6201
6,75 mm CCM01-6202
6,50 mm CCM01-6105
8,00 mm CCM01-6103
Panel Mount CCM01-6301 CCM01-6302
Double Decker CCM01-6402 CCM01-6403

improve interconnect PCB retention.

  • Thermoplastic UL 94 V-0 insulator suitable for wave soldering only
  • Designed to be compatible with: NDS EMVCo

1 Termination true positioning insulator not

Packaging

designed on low profile version 3,9 mm

30 per tray, 10 trays per box.

EMV is a trademark owned by EMVCoLLC.

Page 2

Dimensional Drawings

CCM01-6101

PDF page 2 diagram
PDF page 2 diagram
PDF page 2 diagram

PCB Layout

PDF page 2 diagram

Page 3

Dimensional Drawings

PDF page 3 diagram

PCB Layout

CCM01-6201

(Component side)

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

Contact location according to