CLQ6A-FKW CREE
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 11
Technical content
© 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 CLQ6A-FKW: PLCC8 3 in 1 SMD LED PRODUCT DESCRIPTION These SMD LEDs are packaged in an industry standard PLCC8 package. These high performance 3 color SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for signage applications.
FEATURES
- Size (mm): 5.0 x 5.2 x 1.1
- Dominant Wavelength Red (619 - 624nm) Green (520 - 535nm) Blue (465 - 475nm)
- Luminous Intensity (mcd) Red (3000 - 7030) Green (7030 - 16800) Blue (1824 - 4180)
- Moisture Sensitivity Level: 5a
- Lead-Free
- RoHS Compliant
APPLICATIONS
- Architecture Lighting
- Decorative Lighting
- Amusement
CLQ6A-FKW: PLCC8 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 ABSOLUTE MAXIMUM RATINGS (T A = 25°C) Items Symbol Absolute Maximum Rating Unit R G B Forward Current Note 1 IF 200 180 180 mA Peak Forward Current Note 2 IFP 500 400 400 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 520 684 684 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 60 110 70 °C/W Junction/solder point 1 chip on RTHJS 20 70 40 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD 1000V Note: 1. Single-color light 2. Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25°C) Characteristics Condition Symbol Values Unit R G B Dominant Wavelength IF = 100 mA(R) IF = 100 mA(G) IF = 100 mA(B) λDOM 619~624 520~535 465~475 nm Spectral bandwidth at 50% IREL max IF = 100 mA(R) IF = 100 mA(G) IF = 100 mA(B) Δ λ 24 38 28 nm Forward Voltage IF = 100 mA(R) IF = 100 mA(G) IF = 100 mA(B) VF(avg) 2.1 3.0 3.1 V VF(max) 2.6 3.8 3.8 V Luminous Intensity IF = 100 mA(R) IF = 100 mA(G) IF = 100 mA(B) IV(min) 3000 7030 1824 mcd IV(avg) 4500 12000 3000 mcd Luminous Flux(Reference) IF = 100 mA(R) IF = 100 mA(G) IF = 100 mA(B) ΦV(avg) 14 30 8.2 lm Reverse Current (max) VR = 5 V IR 100 100 100 μA * Continuous reverse voltage can cause LED damage.
CLQ6A-FKW: PLCC8 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 INTENSITY BIN LIMIT Red (100 mA) Green (100 mA) Blue (100 mA) 1L 3000 4180 1R 7030 10100 1H 1824 2560 1M 3590 5020 1S 8200 12000 1J 2130 3000 1N 4180 5860 1T 10100 14400 1K 2560 3590 1P 5020 7030 1U 12000 16800 1L 3000 4180 * Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT Red (100 mA) Green (100 mA) Blue (100 mA) RB 619 624 G7 520 525 B4 465 470 G23 522.5 527.5 B45 467.5 472.5 G8 525 530 B5 470 475 G45 527.5 532.5 G9 530 535 * Tolerance of measurement of dominant wavelength is ±1 nm.
CLQ6A-FKW: PLCC8 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 ORDER CODE TABLE Kit Number Color Luminous Intensity (mcd) Dominant Wavelength (nm) Package Min. Max. Color Bin Min.(nm) Color Bin Max. (nm) CLQ6A-FKW-C1L1P1R1U1H1LBB79453 Red 3000 7030 RB 619 RB 624 Reel Green 7030 16800 G7 520 G9 535 Reel Blue 1824 4180 B4 465 B5 475 Reel CLQ6A-FKW-C1L11R11H1BB7C4S3 Red Any 1 Intensity bin from 1L(3000) - 1P(7030) RB 619 RB 624 Reel Green Any 1 Intensity bin from 1R(7030) - 1U(16800) Any 1 hue bin from G7(520)-G9(535) Reel Blue Any 1 Intensity bin from 1H(1824) - 1L(4180) Any 1 hue bin from B4(465)-B5(475) Reel Notes:
- The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable.
- Please refer to the HB LED Lamp Reliability Test Standards document for reliability test conditions.
- Please refer to the HB LED Lamp Soldering & Handling document for information about how to use this LED product safely.
CLQ6A-FKW: PLCC8 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 GRAPHS The data below are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.
CLQ6A-FKW: PLCC8 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 GRAPHS The data below are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.
CLQ6A-FKW: PLCC8 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 MECHANICAL DIMENSIONS All dimensions are in mm. Tolerance of measurement of the dimension is ±0.1. NOTES RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product Ecology section of the Cree LED website. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
CLQ6A-FKW: PLCC8 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 Solder Pad recommend: All dimensions are in mm.
- Tolerance of measurement of the dimension is ±0.1. Assembly notes:
- Modification of an SMD LED is not recommended after soldering. If modification cannot be avoided, the modifications must be pre-qualified to avoid damaging the SMD LED.
- Reflow soldering should not be done more than two times(according to model’s MSL requirements).
- No stress should be exerted on the package during soldering.
- The package may be affected by environments & assemblies which contain corrosive substance. Please avoid conditions which may cause the LEDs to corrode tarnish or discolor.
- The PCB should not be wrapped after soldering to allow natural cooling down to 40°. PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT
CLQ6A-FKW: PLCC8 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: C C C C C – D X G – X H H J J K K L L M M N N T C C C C C – Product Series D – Color G – Option S : Standoff N : No Standoff B : Black Face W : White Face A : Black Body C : Black Face and Black Side Wall T – Packaging Type 1 : Bulk Pack 2 : Ammo Pack 3 : Tape & Reel (Roll Pack) 4 : Tube Pack H – Red Color Min. Intensity Range H – Red Color Max. Intensity Range J – Green Color Min. Intensity Range J – Green Color Max. Intensity Range K – Blue Color Min. Intensity Range K – Blue Color Max. Intensity Range N – Blue Color Max. Wavelength Range N – Blue Color Min. Wavelength Range M – Green Color Max. Wavelength Range M – Green Color Min. Wavelength Range L – Red Color Max. Wavelength Range L – Red Color Min. Wavelength Range
CLQ6A-FKW: PLCC8 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 REFLOW SOLDERING
- The CLQ6A-FKW is rated as a MSL 5a product.
- The recommended floor life out of bag is 24hrs.
- The temperature profile is as below. Use only with CLQ6A-FKW Solder Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Ramp-down rate = 6ºC/s max Peak temperature = 250ºC max Time within 5ºC of actual Peak Temperature = 10s max Duration above 217ºC is 60s max NOTES
- The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are required to handle with care. Never touch the resin surface of SMD products.
- To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method is necessary: Document No.: CREE-05-0057 Rev. NO. : 16 pick up SMD products during the process of SMT production . If handling is necessary, it should take more careful to pick up these products. The following two methods are necessary : Fig. 1a: For Small Top SMD Fig. 1b: For Mini side 0.8mm SMD For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products .Two figure size for reference : b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED. Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of SMD LED. All devices, equipment and machinery must be properly grounded. It is recommended to perform electrical test to screen out ESD failures at final inspection. It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED application. The current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice. Document No.: COTCO-05-0057 Rev. NO. : 13 Melting-point Pre-heat Soak Reflow Cooling Time Temperature Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Average ramp-up rate = 4ºC/s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Preheat time = 100s max. Preheat time = 100s max. Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max. Peak temperature = 230ºC max. Peak temperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration above 183ºC is 80s max. Duration above 217ºC is 80s max. Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): 0.5 7.5 7.0 4.5 2.6 1.5 Recommended solder pad design for heat dissipation (4-pin SMD LED)
CLQ6A-FKW: PLCC8 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1487 REV 3 PACKAGING
- The boxes are not water resistant and they must be kept away from water and moisture.
- The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
- Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
- The reel pack is applied in SMD LED.
- Max 4000 pcs per reel.