CC7 VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 3

Technical content

CC7, CCB www.vishay.com Vishay Electro-Films Revision: 18-Apr-13 1 Document Number: 61012 For technical questions, contact: efi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Thin Film Resistor Divider Network on Alumina, User Trimmable Product may not be to scale The CC7 and CCB series re sistor chips offer the combination of user trimmability, low shunt capacitance and excellent stability. The CC7 and CCB can be specified as either a single R T value resistor, as two resistors with a center tap feature (1:1 ratio or custom) ratio or user trimmable. The CC7 and CCBs a six bonding pads allows the user increased layout flexibility. The CC7 and CCBs are manufactured using Vishay Electro-Films (EFI) sophisticated thin film equipment and manufacturing technology. They are 100 % electrically tested and visually inspected to MIL-STD-883, method 2032 class H or class K.

FEATURES

  • Wire bondable
  • Small single chip size CCB - 0.050" x 0.050"
  • Case: 0303, 0505
  • Alumina substrate
  • Low stray capacitance: < 0.2 pF
  • Resistance range R T:  100  to 20 k for CC7 100  to 50 k for CCB
  • Resistor material: Nichrome
  • User trimmable
  • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

Vishay EFI CC7 and CCB chip resistors provide excellent high frequency response and are ideally suited for prototyping. Typical application areas are:

  • A m p l i f i e r s
  • Oscillators
  • Attenuators
  • C o u p l e r s
  • F i l t e r s Recommended for hermetic environments where die is not exposed to moisture Note
  • Performance characteristics are not guaranteed once user trimmed TEMPERATURE COEFFICIENT OF RESISTANCE, VALUES, AND TOLERANCES PARAMETER VALUE UNIT Total Resistance Range 100 to 50K  Standard Tolerances ± 0.1 % STANDARD ELECTRICAL SPECIFICATIONS PARAMETER VALUE UNIT Noise, MIL-STD-202, Method 308 - 20 typ. dB Stability, 1000 h, + 125 °C at Rated Power + 0.1 max. R/R % Operating Temperature Range - 55 to + 125 °C Thermal Shock, MIL-STD-202, Method 107, Test Condition F + 0.25 max. R/R % High Temperature Exposure, + 150 °C, 100 h + 0.25 max. R/R % Dielectric Voltage Breakdown 400 V Insulation Resistance 10 12 min.  Operating Voltage 100 max. V DC Power Rating at 125 °C 0.1 max. (50 mil) W0.05 max. (30 mil) 5 x Rated Power Short-Time Overload, + 25 °C, 5 s + 0.25 max. R/R % ± 25 ppm/°C 0.1 % 100 Ω Tightest Standard Tolerance Available ± 100 ppm/°C ± 50 ppm/°C 50 kΩ200 Ω 1 kΩ ± 10 ppm/°C

CC7, CCB www.vishay.com Vishay Electro-Films Revision: 18-Apr-13 2 Document Number: 61012 For technical questions, contact: efi@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in inches SCHEMATIC MECHANICAL SPECIFICATIONS PARAMETER VALUE Chip Thickness 0.010" ± 0.002" (0.25 mm ± 0.03 mm) Chip Substrate Material 99.6 % alumina, 2 microinch to 4 microinch finish Resistor Material Nichrome Number of Pads 6 Pad Material 25 kÅ minimum gold standard Backing None GLOBAL PART NUMBER INFORMATION Global Part Number: CC750000KCKKGNHWS Global Part Number Description: CC7 5K 10 % RT 0.25 % 100 ppm/°C 10 ppm/°C Au None H WS MODEL RESISTANCE (R TOTAL) RESISTANCE MULTILPLIER CODE TOL. CODE (%) RATIO TOL. (%) TCR (ppm/°C) TC TRACK (ppm/°C) TERMINATION BACK METAL VISUAL CLASS PACKAGING CODE CC7 = 30 x 30 size CCB = 50 x 50 size First 4 digits are significant figures of resistance B = 0.01 A = 0.1 0 = 1 1 = 10 B = 0.1 C = 0.25 D = 0.5 F = 1.0 G = 2.0 J = 5.0 K = 10 B = 0.1 C = 0.25 D = 0.5 F = 1.0 G = 2.0 U = User N = No E = ± 25 C = ± 50 K = ± 100 M = ± 250 G = ± 2 J = ± 5 K = ± 10 N = No G = Au A = Al G = Au N = None H = Class H K = Class K WS = Waffle pack 100 min., 1 mult 0.050 0.005 0.0500.035 0.0075 CCB 0.005 0.030 0.005 0.0300.016 0.005 CC7 0.005 RA RB RT = RA + RB 000K K K G C57CC 0 N HW S

www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED