549292 FESTO
Document overview
- PDF pages: 1
Technical content
Page 1
Signal convertor CASM-S-D2-R3
Part number: 549292

Data sheet
| Feature | Value |
| Diagnostic function | Indication via LED |
| Mounting position | Any |
| Power supply requirement | PELV |
| Nominal operating voltage DC | 24 V |
| Power failure buffering | 10 ms |
| Residual ripple | 4 Vss |
| Current consumption at nominal operating voltage | 40 - 50 mA |
| Permissible voltage fluctuations | +/- 25 % |
| Certification | RCM compliance mark |
| KC characters | KC EMC |
| CE marking (see declaration of conformity) | As per EU EMC directive As per EU RoHS directive |
| Continuous shock resistance to DIN/IEC 68 Part 2-82 | Tested as per severity level 2 |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| Storage temperature | -20 °C ... 70 °C |
| Relative air humidity | 95 % Non-condensing |
| Degree of protection | IP67 Plug connector in plugged-in condition |
| Vibration resistance to DIN/IEC 68 Part 2-6 | Tested as per severity level 2 |
| Ambient temperature | 0 °C ... 55 °C |
| Product weight | 128 g |
| Electrical connection, displacement encoder | M12 Socket 5-pin |
| Electrical connection, control interface | Plug M9 5-pin |
| Control interface | Digital CAN bus with Festo protocol Without terminating resistor |
| Type of mounting | With through-hole |
| Housing material | PBT-reinforced |
4/20/22 - Subject to change - Festo SE & Co. KG
1/1