C7339 HAMAMATSU

Document overview

  • PDF pages: 2

Technical content

Page 1

Position Sensor C7339

(For Laser Beam Alignment)

DATA SHEET

PDF page 1 diagram

The C7339 Position Sensor is an opto-electric positionsensing unit which measures the position of a single point of light spot-focused onto the sensor head. The use of hybrid circuitry allows for a compact, lightweight design and a divided configuration with a light, compact sensor head and a controller equipped with a light level indicator and data displays for ease of operation. The measured position is displayed digitally in terms of X- and Y-coordinate voltages on the front panel of the controller and may be simultaneously output to a re- corder. The C7339 does not possess a background-light cancellation function and is suited for use in locations where the

signal light is distinct from the background such as in the detection of laser beams.

SYSTEM CONFIGURATION EXAMPLE

Standard configuration

FEATURES

  • Quick Response The response time of less than 20µs enables accurate mea- surement of the spot, even while it is moving at high speeds.
  • Stable Measurement The position data (X-Y coordinate voltages) of a light spot is obtained without being affected by signal current fluctua- tions from the PSD, enabling accurate position measurement regardless of fluctuations in the light intensity.
  • Broad Spectral Response The C7339 has a broad spectral range, from 300 to 1100 nm, enabling the detection of a variety of light sources, including lasers.
  • High Resolution The PSD employed in the sensor head is of the non-discrete type, which, contrary to a discrete-type sensor, has no insen- sitive area. This enables continuous measurement at a high resolution of 1/5000 (when using a recorder).
  • Light Level Indicator The input light level is indicated in digits on the front panel of the control unit (0.00 to 10.0) so as to make it easy to adjust the lens iris and select an ND filter.
PDF page 1 diagram

Page 2

SPECIFICATIONS

OTHER APPLICATIONS

  • Surface Flatness Measurement
Detector Non-discrete position-sensitive detector (Hamamatsu S1880-03)
Useful sensitive area (Fig.1) 10 × 10mm
Lens mount C mount
Output voltage: X-axis – 5 to + 5V
Y-axis – 5 to + 5V
Output impedance 500Ω ± 10%
Response speed (Fig.2) Within 20µs
Recommended measurement light level Light level (∑) = 8 (Displayed on a level indicator)
Position detection error Zone A (refer to figure below) ±1.0%, Zone B ±2.0%
Error due to light intensity variations ±1% (Light level (∑) = 8→4)
Resolution (when using a recorder) 1/5000
Jitter ±1.5/1000
Drift ±0.5%/day (after the first 30 minutes)
Operating temperature 0 to +40°C
Storage temperature –10 to +50°C
Operating/storage humidity Less than 90% (with no condensation)
Line voltage 100/117/220/240VAC ±10%, 50/60Hz
Power consumption Approx. 30VA
  • Solar Tracking Systems

CONFIGURATION

Sensor head (C7339-01) ....................... 1

Controller (C7339-0X\*) .......................... 1

AC cable (2m) ........................................ 1

Head connecting cable (5m).................. 1

Signal cables (BNC-BNC, 3m) .............. 2

Fuses (1A) ............................................. 3

Line voltage \* X = 2 ......................... 100V

3 .......................... 117V 4 .......................... 220V 5 .......................... 240V

OPTIONAL

Metal interference filters

Filter adapter

PDF page 2 diagram
PDF page 2 diagram

INPUT LIGHT

PDF page 2 diagram

RESPONSE FREQUENCY

OUTPUT VOLTAGE

Fig.2 Rise and fall time of the output voltage when a pulsed light is applied to the center

Fig.1 Useful Sensitive Area

Fig.3 Response frequency of the output

and Zones A and B

of the sensitive area.

voltage when a spot light is moved

The rise time is the period of time required for the output voltage to rise from 10%

right and left repeatedly while it is

to 90% of its full level.

being applied to the sensitive area.

The fall time is the period required for the output voltage to return from 90% to 10%.

OPTIMUM INPUT LASER POWER

Laser Wavelength Input Laser Power
He-Ne Laser 632nm Approx. 23µW
Ar Laser 514nm Approx. 27µW

DIMENTIONAL OUTLINE (UNIT:mm)

When light with the value on the table at the left is input, "8" appears on the display indicating the volume of incident light. If strong laser light is used, an ND filter or similar means should be used to reduce the volume of laser light to the optimum volume before beginning measurement.

  • Controller (Weight: Approx. 3.87kg)
  • Sensor head (Weight: Approx. 140g)

64

HAMAMATSUPOSITION SENSOR SYSTEM C7339 POWER 1 .X D1 A T A1 1 .Y D1 A T A1 LHOIGWH 5L E.V E5L POWER SENSOR HEAD LINE SIGNAL OUT X DATA Y DATA 69.6
232 227

40

HAMAMATSU

  • Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
  • Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies

ISO 9001/ISO 13485

EN 46001

or omissions. Specifications and external appearance are subject to change without notice. © 1999 Hamamatsu Photonics K.K.

HAMAMATSU PHOTONICS K.K., Systems Division

Certificate: 09 105 79045

Homepage Address http://www.hamamatsu.com

812 Joko-cho, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail:export@sys.hpk.co.jp U.S.A. and Canada: Hamamatsu Photonic Systems: 360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1)908-231-1116, Fax: (1)908-231-0852 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: (44)181-367-3560, Fax: (44)181-367-6384

North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 Solna, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1/E 20020 Arese (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741

Cat. No. SIMS1004E01 FEB/99 CR Created in Japan (PDF)