2SC5060 ROHM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Rev.A 1/3 Power transistor (90±10V, 3A) 2SC5060 zFeatures 1) Built-in zener diode between collector and base. 2) Zener diode has low voltage dispersion. 3) Strong protection against reverse power surges due to “L” loads. 4) Darlington connection for high DC current gain. 5) Built-in resistor between base and emitter. 6) Built-in damper diode. zEquivalent circuit R2R1 B C E C B E: Base : Collector : Emitter R1 3kΩ R2 1kΩ zAbsolute maximum ratings (Ta=25°C) Parameter Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Limits 90±10 90±10 150 −55 to +150 Unit V V V A(DC) A(Pulse) W ∗1 Single pulse Pw=10ms ∗2 Printed circuit board : 1.7 mm thick, collector copper plating at least 100mm2. Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature zPackaging specifications and hFE Type 2SC5060 ATV M TV2 2500 Package hFE Code Basic ordering unit (pieces) zExternal dimensions (Unit : mm) (1) Emitter (2) Collector (3) Base 0.451.05 Taping specifications 0.5 (1) 0.65Max. 2.54 (2) 2.54 (3) 6.8 1.0 14.5 0.9 4.4 2.5 ROHM : ATV zElectrical characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Conditions BVCBO BVCEO ICBO IEBO VCE(sat) hFE fT Cob 1000 100 100 1.5 5000 V V µA mA V MHz pF IC=50µA IC=1mA VCB=70V VEB=5V IC/IB=500mA/1mA VBE(sat) −− 2 ∗1VI C/IB=500mA/1mA VCE=3V, IC=0.5A VCB=5V, IE=−0.1A, f=30MHz VCE=10V, IE=0A, f=1MHz ton − 0.2 −µ s IC=0.8A, RL=50Ω tstg − 5 −µ s IB1= −IB2=8mA tf − 0.6 −µ s VCC 40V Collector-base breakdown voltage Collector-emitter breakdown voltage BVEBO 6 −− VI E=5mAEmitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current transfer ratio Transition frequency Output capacitance Base-emitter saturation voltage Turn-on time Storage time Fall time ∗1 Measured using pulse current. ∗2 Transition frequency of the device.

Rev.A 2/3 zElectrical characteristics curves BASE TO EMITTER VOLTAGE : VBE (V) COLLECTOR CURRENT : IC (A) Fig.1 Ground emitter propagation characteristics 0.01 0.02 0.05 0.1 0.2 0.5 VCE=3V Ta =100 −25 COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR CURRENT : IC (A) Fig.2 Ground emitter output characteristics( ) 0 1 23 45 0.4 0.8 1.2 1.6 2.0 Ta=25°C IB=0mA 0.9mA 0.8mA 0.7mA 0.6mA 0.1mA 0.2mA 0.3mA 0.4mA 1mA 0.5mA COLLECTOR TO EMITTER VOLTAGE : VCE (V) COLLECTOR CURRENT : IC (A) Fig.3 Ground emitter output characteristics( ) 04 8 12 16 20 0.4 0.8 1.2 1.6 2.0 Ta=25°CIB=0mA 0.7mA 0.1mA 0.2mA 0.3mA0.4mA0.5mA 1mA COLLECTOR CURRENT : IC (A) Fig.6 Collector-emitter saturation voltage vs. collector current COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) 0.1 0.2 0.5

100 Ta=25°C

IC/IB=1000 COLLECTOR CURRENT : IC (A) Fig.4 DC current gain vs. collector current ( ) DC CURRENT GAIN : hFE 100 200 500 10k Ta=25°C VCE=5V 100 200 500 10k COLLECTOR CURRENT : IC (A) Fig.5 DC current gain vs. collector current( ) DC CURRENT GAIN : hFE Ta=100 −25°C VCE=3V Fig.8 Collector output capacitance vs. collector-base voltageCOLLECTOR OUTPUT CAPACITANCE : Cob (pF) 0.1 0.2 0.5 1 2 5 10 20 50 100 100 200 500 1000 COLLECTOR TO BASE VOLTAGE : VCB (A) Ta=25°C f=1MHz IE=0A COLLECTOR CURRENT : IC (A) Fig.7 Collector-emitter saturation voltage Base-emitter saturation voltage vs. collector current COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) BASE SATURATION VOLTAGE : VCE(sat) (V) 0.1 0.2 0.5 100 Ta= −25°C VBE(sat) VCE(sat) 25°C 100°C −25°C 25°C 100°C IC/IB=500 0.1 0.2 0.5 100 COLLECTOR CURRENT : IC (A) Fig.9 Switching characteristics TURN ON TIME : ton (µs) STORAGE TIME : tstg (µs) FALL TIME : tf (µs) IC=100IB1= −100IB2 Ta=25°C ton tf tstg

Rev.A 3/3 0.1 0.2 0.5 1 2 5 10 20 50 100 10m 20m 50m 100m 200m 500m COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.10 Safe operating area COLLECTOR CURRENT : IC (A) Ta=25°C ∗Single nonrepetitive pulse IC(MAX) (Pulse∗) DC Pw =1ms ∗10ms 100ms Collector current waveform Base current waveform VIN +VBB PW PW 50 S Duty cycle 1% IB1 IB1 90% 10% IB2 IB2 IC −VBB IC RL=50Ω VCC 40V ton tstg tf T.U.T Fig.11 Switching time mesurement circuit

Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.