C11152 HAMAMATSU
Document overview
- PDF pages: 2
Technical content
Page 1


The C11152 series is a compact PC-board mountable high voltage power supply module, especially designed for photomultiplier tubes. The C11152 and C11152-01 output negative polarity and the C11152-50 and C11152-51 output positive polarity high voltage.
FEATURES
G Low ripple / noise G Compact and lightweight G High stability G High voltage monitor output G Various protective and fail-safe functions
SPECIFICATIONS
| Parameter | C11152 | C11152-01 | C11152-50 | C11152-51 | Unit | ||
|---|---|---|---|---|---|---|---|
| Input voltage | +15 ± 1 | +12 ± 0.5 | +15 ± 1 | +12 ± 0.5 | V | ||
| Input current A | with no load | Typ. | 45 | 50 | 45 | 50 | mA |
| with full load | Typ. | 180 | 220 | 180 | 220 | ||
| Variable output voltage range | 0 to -1500 | 0 to +1500 | V | ||||
| Specification guaranteed output voltage range | -240 to -1500 | +240 to +1500 | V | ||||
| Output current | Max. | 1 | mA | ||||
| Line regulation against ±1 V or ±0.5 V input change AB | Typ. | ±0.01 | % | ||||
| Load regulation against 0 % to 100 % load change A | Typ. | ±0.01 | % | ||||
| Ripple / noise (p-p) AB | Typ. | 5 (>5 kHz), 8 (< =5 kHz) | mV | ||||
| Output voltage control | By external controlling voltage (0 V to +5 V) or external potentiometer (50 kΩ) | — | |||||
| Controlling voltage input impedance | Typ. | 130 | 150 | kΩ | |||
| Reference voltage output | Typ. | +5.2 | V | ||||
| Output voltage setting (absolute value) | Typ. | Controlling voltage × 300 | V | ||||
| Output voltage rise time (0 % ➝ 99 %) AB | Typ. | 120 | ms | ||||
| Temperature coefficient AB | Typ. | ±0.005 | % / °C | ||||
| High voltage monitor output | 0 to +5 (Output impedance 10 kΩ) | V | |||||
| ON / OFF input | TTL positive logic | — | |||||
| ON / OFF input inpedance | 30 | kΩ | |||||
| Operating ambient temperature AB | 0 to +50 | °C | |||||
| Operating ambient humidity C | Below 80 | % | |||||
| Storage temperature | -20 to +60 | °C | |||||
| Storage humidity C | Below 80 | % | |||||
| Weight | 38 | g | |||||
| Protective functions | Units protected against reversed power input, reversed / excessive controlling voltage input, continuous overloading / short circuit in output | — | |||||
AAt maximum output voltage. BAt maximum output current. CNo condensation
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K.
Page 2
HIGH VOLTAGE POWER SUPPLY C11152
Figure 1: Connection diagrams
GOUTPUT VOLTAGE CONTROLLING
GOUTPUT VOLTAGE CONTROLLING
BY EXTERNAL VOLTAGE
BY EXTERNAL POTENTIOMETER

PIN ASSIGNMENT 1Vref +5.2 V Typ. 2Vcont 3Vcont GND\*\* 4ON / OFF IN 5GND\*\* 6Vcc +15 V or +12 V 7HV MONITOR OUT 8HV OUT 9HV GND
\* The instability in the external controlling voltage should be minimized as it directly affects the output voltage quality. \*\* Never connect the pin number 3 and 5 directly and externally.
TACCC0146EB
Figure 3: Overload characteristics
Figure 2: Output voltage controlling characteristics
(C11152, C11152-01)
(C11152, C11152-01)
(C11152-50, C11152-51)
(C11152-50, C11152-51)


CONTROLLING VOLTAGE (V)
OUTPUT CURRENT (A)
Figure 4: Dimensional outline (Unit: mm)

PIN ASSIGNMENT 1Vref +5.2 V Typ. 2Vcont 3Vcont GND\*\* 4ON / OFF IN 5GND\*\* 6Vcc +15 V or +12 V 7HV MONITOR OUT 8HV OUT 9HV GND
\* The metal housing is internally connected to the GND. \*\* Never connect the pin number 3 and 5 directly and externally.
TACCA0306EC
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: info@hamamatsu.it
TACC1053E02
China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: hpc@hamamatsu.com.cn
OCT. 2015. IP