C10000 HAMAMATSU
Document overview
- PDF pages: 2
Technical content
Page 1
TDI Camera

Time Delay Integration Camera

The C10000-401 TDI camera is useful for a wide range of imaging applications requiring high speed operation with high sensitivity simultaneously. TDI is a special image acquisition method that has been used extensively in machine vision applications for industrial inspection. TDI imaging is appropriate for applications where it is desired to record a linear process over time, or where the aspect ratio of the subject being imaged is significantly asymmetric. TDI is particularly useful for low light level scanning applications for which a typical line scan camera can not make a useful image. Also, frame readout mode is available for easy focusing.
OPERATING PRINCIPLE OF TDI
OPERATING PRINCIPLE OF TDI
FEATURES
FEATURES
High resolution / high sensitivity
(Horizontal spatial resolution with 128(V) TDI stages) - 2048(H) × 128 (V) , 4 TAP
Line rate up to 50 kHz High speed imaging combined with high sensitivity
and low noise
Great spectral response for UV-NIR with back thinned CCD
100× anti-blooming with lateral overflow drain
Dynamic range of 800 : 1 12 bit / 8 bit selectable A/D converter Bi-directional scanning operation Frame readout mode for easy focusing Real time shading correction with internal DSP
APPLICATIONS
APPLICATIONS
High speed imaging for low light applications
i.e. fluorescence imaging Electronics manufacturing and inspection Semiconductor inspection High speed scanning for a large size sample
i.e. flat panel displays

Page 2
SPECIFICATIONS
SPECIFICATIONS
| Type number | C10000-401 |
|---|---|
| Pixel number | 2048 (H) × 128 (V) |
| Device structure | Back thinned type |
| Cell size | 12 μm(H) × 12 μm(V) |
| Effective area | 24.58 mm(H) × 1.536 mm(V) |
| Readout mode | TDI readout mode or frame readout mode*1 |
| TDI transfer direction | Bi direction |
| TDI output channel | 4 TAP (512 × 4) |
| Anti-blooming | Lateral overflow drain (100×) |
| TDI pixel clock rate | 30 MHz |
| TDI line rate | 0.45 kHz to 50 kHz |
| TDI line rate control | Internal setting by serial command*2 / External trigger |
| Full-well capacity (typ.) | 80 000 electrons |
| Readout noise (typ.) | 100 electrons r.m.s. |
| Dynamic range (typ.) | 800 : 1 |
| Binning | 2 × 2 |
| Analog enhancement gain | 1 time to 5 times (16 steps) |
| A/D converter | 12 bit / 8 bit *3 |
| Image processing | Real-time shading correction |
| Interface | Base Configuration |
| Camera control | Serial control in Camera Link |
| Camera output clock | 60 MHz |
| Camera output channel | 2 TAP (1024 × 2) |
| Camera Link connector | Mini-Camera Link (SDR) × 1 |
| Lens mount | F-mount |
| Power / Power consumption | DC +12 V / 20 W |
| Ambient storage tenmperature | -10 : to +50 : |
| Ambient operating temperature | 0 : to +40 : |
| Ambient operating / storage humidity | 70 % max. (with no condensation) |
\*1 Frame readout mode is useful for easy focusing, but it is not suitable for measurement. Please consult with our sales office for details \*2 Internal TDI line rate is set by 33 ns step. \*3 Selectable by serial command.
DIMENSIONAL OUTLINES
DIMENSIONAL OUTLINES (Unit : mm)

SPECTRAL RESPONSE
SPECTRAL RESPONSE
\* This is typical, not guaranteed.

Wavelength (nm)
TDI SENSOR STRUCTURE
TDI SENSOR STRUCTURE

Bi-directional transfer
CAMERA
★ Product and software package names noted in this documentation are trademarks or registered trademarks of their respective manufacturers.
- Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult your local sales representative.
- Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
- Specifications and external appearance are subject to change without notice.. © 2010 Hamamatsu Photonics K.K.
http://www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Systems Division 812 Joko-cho, Higashi-ku, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail:export@sys.hpk.co.jp U.S.A. and Canada: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1) 908-231-0960, Fax: (1)908-231-0852, E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658, E-mail: info@hamamatsu.de
,
France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10, E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire, AL7 1BW, U.K., Telephone: (44) 1707-294888, Fax: (44) 1707-325777, E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 Solna, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01, E-mail: info@hamamatsu.se
Cat. No. SCAS0033E09
-
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Moia, 1 int.6-200020 Arese (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741, E-mail: info@hamamatsu.it
SEP/2010 HPK Created in Japan