BMXXBP0800 SCHNEIDER
Document overview
- PDF pages: 5
Technical content
Page 1
Specifications
Modicon M340 automation platform,

rack 8 slots, panel, plate or DIN rail
mounting
Main
Modicon M340 automation platform
Range of product
Rack
Accessory / separate part type
Complementary
8 bus X
Number of slots
I/O module
Product compatibility
BMXP34 processor BMXCPS power supply Specific application module
2 W
Power consumption in W
1 connector (XBE) expansion module
Electrical connection
By 4 screws - diameter: 4.32…6.35 mm, mounting on panel
Fixing mode
By 4 M6 screws, mounting on plate By clips, mounting on 35 mm symmetrical DIN rail
0.95 kg
Net weight
Environment
IP20
IP degree of protection
0…60 °C
Ambient air temperature for operation
10…95 % without condensation
Relative humidity
TC
Protective treatment
Packing Units
PCE
Unit Type of Package 1
1
Number of Units in Package 1
1.014 kg
Package 1 Weight
6.8 cm
Package 1 Height
15.4 cm
Package 1 width
45.5 cm
Package 1 Length
P06
Unit Type of Package 2
Number of Units in Package 2
66.28 kg
Package 2 Weight

Page 2
100 cm
Package 2 Height
60 cm
Package 2 width
80 cm
Package 2 Length
S04
Unit Type of Package 3
9
Number of Units in Package 3
9.88 kg
Package 3 Weight
30 cm
Package 3 Height
40 cm
Package 3 width
60 cm
Package 3 Length
Offer Sustainability
Green Premium product
Sustainable offer status
REACh Regulation
REACh Declaration
Yes
REACh free of SVHC
Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Directive
EU RoHS Declaration
Yes
Mercury free
RoHS exemption information
Yes
China RoHS Regulation
China RoHS declaration
Environmental Disclosure
Product Environmental Profile
Circularity Profile
End of Life Information
The product must be disposed on European Union markets following specific waste collection and
WEEE
never end up in rubbish bins
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is
California proposition 65
known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Contractual warranty
18 months
Warranty
Page 3
Dimensions Drawings
Dimensions

Page 4
Mounting and Clearance
Minimum Clearance
Minimum Clearance of a typical installation in a cabinet with ducts

a Side clearance: > 40 mm (1.57 in.) b Top and bottom clearance with surrounding objects: > 20 mm (0.79 in.) 1 Installation or casing 2 Wiring duct or tray
Page 5
Mounting and Clearance
Mounting and Fastening the Racks
Mounting on 35 mm (1.38 in.) Wide and 15 mm (0.59 in.) Deep DIN Rails with Four HM6 Screws

Mounting on Panels
Dimensions in mm / in.

(1) The diameter of the fastening holes must allow use of M4, M5, M6 and UNC #6 screws.
| Rack | a | b | Size of the rack and extension module |
| BMXXBP040 and BMXXBP0400H | 207.8 mm (8.187 in.) | 242.2 mm (9.543 in.) | 243.4 mm (9.59 in.) |
| BMXXBP0600 and BMXXBP0600H | 273 mm (10.756 in.) | 307.6 mm (12.12 in.) | 308.8 mm (12.167 in.) |
| BMXXBP0800 and BMXXBP0800H | 338.2 mm (13.325 in.) | 372.8 mm (14.69 in.) | 374 mm (14.736 in.) |
| BMXXBP1200 and BMXXBP1200H | 468.6 mm (18.463 in.) | 503.2 mm (19.826 in.) | 504.4 mm (19.873 in.) |
Mounting on Telequick AM1-PA and AM3-PA Mounting Grids

Fasten the rack with four M4, M5, M6 or UNC #6 screws.