BMXDDM16022 SCHNEIDER
Document overview
- PDF pages: 5
Technical content
Page 1
Specifications
discrete I/O module X80 - 8 inputs -

24 V DC - 8 outputs - solid state
BMXDDM16022
Main
Modicon X80
Range of product
Discrete I/O module
Product or component type
8
Discrete input number
Current sink (logic positive)
Input type
24 V DC, discrete input logic: positive
Discrete input voltage
3.5 mA
Discrete input current
8
Discrete output number
Solid state
Discrete output type
24 V 19...30 V DC
Discrete output voltage
0.5 A
Discrete output current
Complementary
With 2-wire/3-wire proximity sensors conforming to IEC 60947-5-2
Input compatibility
With 2-wire/3-wire proximity sensors conforming to IEC 61131-2 type 3
19...30 V
Sensor power supply
= 3 mA
Current state 1 guaranteed
<= 1.5 mA
Current state 0 guaranteed
0.625 A
Current per channel
5 A
Maximum current per module
0.5 mA at state 0
Maximum leakage current
<1.2 V at state 1
Maximum voltage drop
6800 Ohm
Input impedance
10 MOhm 500 V DC
Insulation resistance
3.7 W
Power dissipation in W
4 ms
DC typical response time
7 ms
DC maximum response time
1.2 ms
Response time on output
Yes : 2 maximum
Paralleling of outputs
79 mA at 3.3 V DC
Typical current consumption
59 mA at 24 V DC

Page 2
<= 111 mA at 3.3 V DC
Current consumption
<= 67 mA at 24 V DC
427772 H
MTBF reliability
1 external fuse per group of input channel0.5 A fast blow
Protection type
overvoltage protection on output reverse polarity protection on input reverse polarity protection on output
With current limiter
Output overload protection
With electronic circuit breaker 1.5 In < Id < 2 In
With transil diode
Output overvoltage protection
With 2 A external fuse
Output short-circuit protection
Reverse mounted diode
Reverse polarity protection
< 14 V DC preactuator fault
Voltage detection threshold
< 14 V DC sensor fault > 18 V DC preactuator OK > 18 V DC sensor OK
6 W
Maximum tungsten load
0.5/LI² Hz
Switching frequency
15 ms
Maximum overload time
= 48 Ohm
Load impedance ohmic
1 LED (green)module operating (RUN)
Status LED
1 LED per channel (green)channel diagnostic 1 LED (red)module error (ERR) 1 LED (red)module I/O
0.115 kg
Net weight
Environment
IP20
IP degree of protection
2014/35/EU - low voltage directive
Directives
2014/30/EU - electromagnetic compatibility
1500 V AC at 50/60 Hz 1 minute, output/ground
Dielectric strength
1500 V AC at 50/60 Hz 1 minute, output/internal logic 1500 V AC at 50/60 Hz 1 minute, primary/secondary 500 V DC 1 minute, between group of inputs and outputs
3 gn
Vibration resistance
30 gn
Shock resistance
-40…85 °C
Ambient air temperature for storage
0…60 °C
Ambient air temperature for operation
5…95 % at 55 °C without condensation
Relative humidity
0...2000 m
Operating altitude
2000...5000 m with derating factor
Packing Units
PCE
Unit Type of Package 1
1
Number of Units in Package 1
145.0 g
Package 1 Weight
5.5 cm
Package 1 Height
11 cm
Package 1 width
12 cm
Package 1 Length
S02
Unit Type of Package 2
Number of Units in Package 2
Page 3
2.44 kg
Package 2 Weight
15 cm
Package 2 Height
30 cm
Package 2 width
40 cm
Package 2 Length
Offer Sustainability
Green Premium product
Sustainable offer status
REACh Regulation
REACh Declaration
Yes
REACh free of SVHC
Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Directive
EU RoHS Declaration
Yes
Mercury free
RoHS exemption information
Yes
China RoHS Regulation
China RoHS declaration
Environmental Disclosure
Product Environmental Profile
Circularity Profile
End of Life Information
The product must be disposed on European Union markets following specific waste collection and
WEEE
never end up in rubbish bins
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is
California proposition 65
known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Contractual warranty
18 months
Warranty
Page 4
BMXDDM16022
Dimensions Drawings
Modules Mounted on Racks
Dimensions

(1) With removable terminal block (cage, screw or spring). (2) With FCN connector. (3) On AM1 ED rail: 35 mm wide, 15 mm deep. Only possible with BMXXBP0400/0400H/0600/0600H/0800/0800H rack.
| Rack references | a in mm | a in in. |
| BMXXBP0400 and BMXXBP0400H | 242.4 | 09.54 |
| BMXXBP0600 and BMXXBP0600H | 307.6 | 12.11 |
| BMXXBP0800 and BMXXBP0800H | 372.8 | 14.68 |
| BMXXBP1200 and BMXXBP1200H | 503.2 | 19.81 |
Page 5
BMXDDM16022
Connections and Schema
Connecting the Module
Input Circuit Diagram

Output Circuit Diagram

Module Connection

power supply 24 VDC input fuse fast blow fuse of 0.5 A output fuse fast blow fuse of 6.3 A pre-act pre-actuator