BMEXBP0400 SCHNEIDER
Document overview
- PDF pages: 7
Technical content
Page 1
Specifications
rack X80 - 4 slots - Ethernet

backplane
Main
Modicon X80
Range of product
Rack
Accessory / separate part type
Complementary
4 bus X + Ethernet
Number of slots
I/O module
Product compatibility
BMX processor Specific application module BMXCPS power supply BME processor
162 mW 3.3 V DC
Power consumption in W
2.8 W 24 V DC
1 connector (XBE) expansion module
Electrical connection
By 4 screws - diameter: 4.32…6.35 mm, mounting on panel
Fixing mode
By 4 M6 screws, mounting on plate By clips, mounting on 35 mm symmetrical DIN rail
49 mA at 3.3 V DC
Current consumption
118 mA at 24 V DC
2000000 H
MTBF reliability
0.705 kg
Net weight
Environment
IP20
IP degree of protection
0…60 °C
Ambient air temperature for operation
5…95 % without condensation
Relative humidity
2014/35/EU - low voltage directive
Directives
2014/30/EU - electromagnetic compatibility
Packing Units
PCE
Unit Type of Package 1
1
Number of Units in Package 1
722.0 g
Package 1 Weight
6.6 cm
Package 1 Height
15 cm
Package 1 width

Page 2
32.5 cm
Package 1 Length
S04
Unit Type of Package 2
13
Number of Units in Package 2
10.086 kg
Package 2 Weight
30 cm
Package 2 Height
40 cm
Package 2 width
60 cm
Package 2 Length
Offer Sustainability
Green Premium product
Sustainable offer status
REACh Regulation
REACh Declaration
Yes
REACh free of SVHC
Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Directive
EU RoHS Declaration
Yes
Mercury free
RoHS exemption information
Yes
China RoHS Regulation
China RoHS declaration
Environmental Disclosure
Product Environmental Profile
Circularity Profile
End of Life Information
The product must be disposed on European Union markets following specific waste collection and
WEEE
never end up in rubbish bins
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is
California proposition 65
known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Page 3
Dimensions Drawings
Dimensions

Dimensions in mm
| a | b | c | |
| Empty Rack | Rack With Extender Module Mounted | ||
| 242.4 | 243.58 | 105.11 NOTE: Overall height is 134.6 with a CPU mounted. | 19 |
Dimensions in in.
| a | b | c | |
| Empty Rack | Rack With Extender Module Mounted | ||
| 9.54 | 9.59 | 4.14 NOTE: Overall height is 5.30 with a CPU mounted. | 0.75 |
Page 4
Minimum Clearance
Minimum Clearance of a typical installation in a cabinet with ducts

a Side clearance: > 40 mm (1.57 in.) b Top and bottom clearance with surrounding objects: > 20 mm (0.79 in.) 1 Installation or casing 2 Wiring duct or tray
Page 5
Mounting a Rack on a DIN rail

Page 6
Mounting and Fastening the Rack on Panels

NOTE: You can use M4, M5, M6, or UNC #6 screws in the fastening holes. Dimensions in mm
| a | b |
| 202.1 | 214.8 |
Dimensions in in.
| a | b |
| 7.96 | 8.46 |
Page 7
Mounting on Telequick Grid AM1-PA and AM3-PA Mounting Grids

Fasten the rack with four M4, M5, M6 or UNC #6 screws