BFW92 VISHAY
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 5
Technical content
Features
/C0068High power gain /C0068Low noise figure 94 9308 BFW92 Marking: BFW92 Plastic case (TO 50) 1 = Collector, 2 = Emitter, 3 = Base 13623 Absolute Maximum Ratings Tamb = 25/C0095C, unless otherwise specified Parameter Test Conditions Symbol Value Unit Collector-base voltage VCBO 25 V Collector-emitter voltage VCEO 15 V Emitter-base voltage VEBO 2.5 V Collector current IC 25 mA Total power dissipation Tamb ≤ 60 /C0176C Ptot 300 mW Junction temperature Tj 150 /C0176C Storage temperature range Tstg –55 to +150 /C0176C Maximum Thermal Resistance Tamb = 25/C0095C, unless otherwise specified Parameter Test Conditions Symbol Value Unit Junction ambienton glass fibre printed board (40 x 25 x 1.5) mm3 plated with 35/C0109m Cu R thJA 300 K/W
www.vishay.de • FaxBack +1-408-970-5600 Rev. 3, 20-Jan-992 (5) Document Number 85040 Electrical DC Characteristics Tamb = 25/C0095C, unless otherwise specified Parameter Test Conditions Symbol Min Typ Max Unit Collector cut-off current VCE = 25 V, VBE = 0 ICES 100 /C0109A Collector-base cut-off currentVCB = 10 V, IE = 0 ICBO 100 nA Emitter-base cut-off current VEB = 2.5 V, IC = 0 IEBO 10 /C0109A Collector-emitter breakdown voltageIC = 1 mA, IB = 0 V(BR)CEO 15 V Collector-emitter saturation voltageIC = 10 mA, IB = 1 mA VCEsat 0.1 0.6 V DC forward current transfer ratioVCE = 1 V, IC = 2 mA hFE 20 100 150 VCE = 1 V, IC = 25 mA hFE 20 Electrical AC Characteristics Tamb = 25/C0095C, unless otherwise specified Parameter Test Conditions Symbol Min Typ Max Unit Transition frequency VCE = 5 V, IC = 2 mA, f = 300 MHz fT 1 1.5 GHzqy VCE = 5 V, IC = 14 mA, f = 300 MHz fT 2.4 GHz VCE = 5 V, IC = 25 mA, f = 300 MHz fT 1.3 2.1 GHz Collector-base capacitanceVCB = 5 V, f = 1 MHz C cb 0.5 pF Collector-emitter capacitanceVCE = 5 V, f = 1 MHz C ce 0.3 pF Emitter-base capacitance VEB = 0.5 V, f = 1 MHz C eb 0.9 pF Noise figure VCE = 5 V, IC = 2 mA, ZS = 50 /C0087, f = 500 MHz F 3.5 dB Power gain VCE = 5 V, IC = 10 mA, ZS = 50 /C0087, f = 200 MHz G pe 23 dB VCE = 5 V, IC = 10 mA, ZS = 50 /C0087, f = 800 MHz G pe 11 dB Signal–to–intermodulation ratio VCE = 6 V, IC = 10 mA, ZL = 37.5 /C0087, V1 = 100 mV, f1 = 183 MHz, V2 = 100 mV, f2 = 200 MHz, fdIM = 217 MHz dIM –45 dB
www.vishay.de • FaxBack +1-408-970-5600 Rev. 3, 20-Jan-994 (5) Document Number 85040 Dimensions of BFW92 in mm 96 12244
www.vishay.de • FaxBack +1-408-970-5600 Rev. 3, 20-Jan-99 5 (5) Document Number 85040 Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay-Telefunken products for any unintended or unauthorized application, the buyer shall indemnify Vishay-Telefunken against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423