BFU668F NPN wideband silicon RF transistor

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 14

Technical content

  1. Product profile

1.1 General description

NPN silicon microwave transistor in a plastic, 4-pin dual-emitter SOT343F package offering an innovative Ku-band DRO solution.

1.2 Features and benefits

 DROs with good output power and low phase noise at very low current consumption: 5 dBm and 55 dBc/Hz/1 kHz at 12 mA  Low-noise, high gain for low cost LNA solutions  40 GHz fT silicon technology

1.3 Applications

 Ku-band DROs in Ku-band LNBs  C-band, low current LNAs BFU668F NPN wideband silicon RF transistor Rev. 3 — 24 January 2012 Product data sheet CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Observe precautions for handling electrostatic sensitive devices. Such precautions are described in the ANSI/ESD S20.20, IEC/ST 61340-5, JESD625-A or equivalent standards.

1.4 Quick reference data

[1] T sp is the temperature at the solder point of the emitter lead. [2] G p(max) is the maximum power gain, if K > 1. If K < 1 then Gp(max) =M S G . Table 1. Quick reference data Table 2. Discrete pinning

[1] T sp is the temperature at the solder point of the emitter lead. Table 3. Ordering information Table 4. Marking Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Table 6. Thermal characteristics

Product data sheet Rev. 3 — 24 January 2012 4 of 14 NXP Semiconductors BFU668F NPN wideband silicon RF transistor Fig 1. Power derating curve Tsp (°C) 0 160 12040 80 aaa-001278 100 150 200 250 Ptot (mW)

[1] G p(max) is the maximum power gain, if K > 1. If K < 1 then Gp(max) =M S G . Table 7. Characteristics

Product data sheet Rev. 3 — 24 January 2012 6 of 14 NXP Semiconductors BFU668F NPN wideband silicon RF transistor 8. Application information

8.1 BFU668F Ku-band Dielectric Resonator Oscillator (DRO)

Figure 2 shows a typical DRO circuit using BFU668F as active device. The schematic highlights the bias elements. Evaluation tests, done by replacing the existing transistor with BFU668F, on three different DRO LNBs / configurations, have proven:

  • BFU668F achieves similar Phase Noise and RF power as the replaced transistor
  • BFU668F achieves same RF performances at approximately half of the bias current Fig 2. Generic schematic / bias DR BFU668F LC IC VCE RB RC VCC CB CC CCC LB aaa-001279

Product data sheet Rev. 3 — 24 January 2012 7 of 14 NXP Semiconductors BFU668F NPN wideband silicon RF transistor

8.2 Graphs

Tamb =2 5 C. (1) I B =5 0 A (2) I B = 100 A (3) I B = 150 A (4) I B = 200 A (5) I B = 250 A (6) I B = 300 A VCE = 2 V; Tamb =2 5 C. Fig 3. Collector current as a function of collector-emitter voltage; typical values Fig 4. DC current gain as a function of collector current; typical values VCE (V) aaa-00128040 IC (mA) (2) (6) 05 4231 (1) (4) (5) (3) IC (mA) 403020100 aaa-001281 hFE 120 160 200

Product data sheet Rev. 3 — 24 January 2012 8 of 14 NXP Semiconductors BFU668F NPN wideband silicon RF transistor f=1M H z , Tamb =2 5 C. VCE = 3.5 V; f = 2 GHz; Tamb =2 5 C. Fig 5. Collector-base capacitance as a function of collector-base voltage; typical values Fig 6. Transition frequency as a function of collector current; typical values VCE = 3.5 V; Tamb =2 5 C. (1) f = 5.8 GHz (2) f = 10.0 GHz Fig 7. Gain as a function of collector current; typical value aaa-001282 1208 4 CCBS (fF) VCB (V) 120 160 200 IC (mA) 403020100 aaa-001283 fT (GHz) aaa-001284 G (dB) IC (mA) 401252 6 19 33 (2) (1)

Product data sheet Rev. 3 — 24 January 2012 9 of 14 NXP Semiconductors BFU668F NPN wideband silicon RF transistor VCE = 3.5 V; IC =1 5m A ; Tamb =2 5 C. VCE = 3.5 V; IC = 15 mA; Tamb =2 5 C. Fig 8. Gain as a function of frequency; typical values Fig 9. Minimum noise figure as a function of frequency; typical values aaa-001285 G (dB) f (GHz) 01 0 8462 MSG Gp(max) |S21|2 NFmin (dB) f (GHz) aaa-001286 01 08462 0.8 1.2 0.4 1.6 2.0 0.0

Product data sheet Rev. 3 — 24 January 2012 10 of 14 NXP Semiconductors BFU668F NPN wideband silicon RF transistor 9. Package outline Fig 10. Package outline SOT343F REFERENCESOUTLINE VERSION EUROPEAN PROJECTION ISSUE DATE IEC JEDEC JEITA SOT343F SOT343F 05-07-12 06-03-16 UNIT A max mm 0.4 0.3 0.75 0.65 0.7 0.5 2.2 1.8 0.25 0.10 1.35 1.15 0.48 0.38 2.2 2.0 b p DIMENSIONS (mm are the original dimensions) Plastic surface-mounted flat pack package; reverse pinning; 4 leads b1 c D E e e1 HE 1.15 1.3 Lp w y 0.1 0.2 0 1 2 mm scale detail X Lp c A E X HE D A y bp b1 e wAMwAM

Table 8. Abbreviations Table 9. Revision history

  • Table 1 on page 2: maximum value for hFE has been changed.
  • Table 7 on page 5: maximum value for hFE has been changed. BFU668F v.2 20120120 Product data sheet - BFU668F v.1 BFU668F v.1 20111108 Product data sheet - -

Product data sheet Rev. 3 — 24 January 2012 12 of 14 NXP Semiconductors BFU668F NPN wideband silicon RF transistor 12. Legal information

12.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.

12.2 Definitions

Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet.

12.3 Disclaimers

Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms , unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification.

Product data sheet Rev. 3 — 24 January 2012 13 of 14 NXP Semiconductors BFU668F NPN wideband silicon RF transistor Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding.

12.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com

NXP Semiconductors BFU668F NPN wideband silicon RF transistor © NXP B.V. 2012. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 24 January 2012 Document identifier: BFU668F Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. 14. Contents

8.1 BFU668F Ku-band Dielectr ic Resonator Oscillator