BFR90A VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 9

Technical content

Features

  • High power gain  Low noise figure  High transition frequency  Lead (Pb)-free component  Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC

Applications

 RF amplifier up to GHz range specially for wide band antenna amplifier Mechanical Data Case: TO-50 plastic case Weight: approx. 111 mg Pinning: 1 = collector, 2 = emitter, 3 = base Parts Table Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Maximum Thermal Resistance Note: 1) on glass fibre printed board (40 x 25 x 1.5) mm3 plated with 35 μm Cu E B C 19039 Electrostatic sensitived evice. Observe precautions for handling. Part Ordering code Marking Remarks Package BFR90A BFR90AGELB BFR90A Packed in Bulk TO-50(3) Parameter Test condition Symbol Value Unit Collector base voltage V CBO 20 V Collector emitter voltage V CEO 15 V Emitter base voltage V EBO 2V Collector current I C 30 mA Total power dissipation T amb ≤ 60 °C P tot 300 mW Junction temperature T j 150 °C Storage temperature range T stg - 65 to + 150 °C Parameter Test condition Symbol Value Unit Junction ambient 1) RthJA 300 K/W

www.vishay.com Document Number 85029 Rev. 1.6, 08-Sep-08 BFR90A Vishay Semiconductors For technical support, please contact: RF-Transistor@vishay.com Electrical DC Characteristics Tamb = 25 °C, unless otherwise specified Electrical AC Characteristics Tamb = 25 °C, unless otherwise specified Common Emitter S-Parameters Parameter Test condition Symbol Min Typ. Max Unit Collector emitter cut-off current VCE = 20 V, VBE = 0 I CES 100 μA Collector base cut-off current VCB = 15 V, IE = 0 I CBO 100 nA Emitter base cut-off current VEB = 2 V, IC = 0 I EBO 10 μA Collector emitter breakdown voltage IC = 1 mA, IB = 0 V (BR)CEO 15 V DC forward current transfer ratio VCE = 10 V, IC = 14 mA h FE 50 100 150 Parameter Test condition Symbol Min Typ. Max Unit Transition frequency VCE = 10 V, IC = 14 mA, f = 500 MHz fT 6G H z Collector base capacitance VCB = 10 V, f = 1 MHz C cb 0.3 pF Collector emitter capacitance VCE = 10 V, f = 1 MHz C ce 0.25 pF Emitter base capacitance VEB = 0.5 V, f = 1 MHz C eb 0.9 pF Noise figure VCE = 10 V, IC = 2 mA, f = 800 MHz, ZS = 50 Ω F1 . 8 d B Power gain VCE = 10 V, IC = 14 mA, ZL = ZLopt, f = 800 MHz Gpe 16 dB Linear output voltage - two tone intermodulation test VCE = 10 V, IC = 14 mA, dIM = 60 dB, f1 = 806 MHz, f2 = 810 MHz, ZS = ZL = 50 Ω V1 = V2 120 mV Third order intercept point VCE = 10 V, IC = 14 mA, f = 800 MHz IP3 24 dBm VCE/V IC/mA f/MHz S11 S21 S12 S22 LIN MAG ANG LIN MAG ANG LIN MAG ANG LIN MAG ANG deg deg deg deg

Rev. 1.6, 08-Sep-08 Vishay Semiconductors www.vishay.com For technical support, please contact: RF-Transistor@vishay.com VCE/V IC/mA f/MHz S11 S21 S12 S22 LIN MAG ANG LIN MAG ANG LIN MAG ANG LIN MAG ANG deg deg deg deg

www.vishay.com Document Number 85029 Rev. 1.6, 08-Sep-08 BFR90A Vishay Semiconductors For technical support, please contact: RF-Transistor@vishay.com VCE/V IC/mA f/MHz S11 S21 S12 S22 LIN MAG ANG LIN MAG ANG LIN MAG ANG LIN MAG ANG deg deg deg deg

Figure 5. Input Reflection Coefficient Figure 6. Forward Transmission Coefficient

2.0 GHz

Figure 7. Reverse Transmission Coefficient Figure 8. Output Reflection Coefficient

Rev. 1.6, 08-Sep-08 Vishay Semiconductors www.vishay.com For technical support, please contact: RF-Transistor@vishay.com Package Dimensions in millimeters: TO-50 96 12244

www.vishay.com Document Number 85029 Rev. 1.6, 08-Sep-08 BFR90A Vishay Semiconductors For technical support, please contact: RF-Transistor@vishay.com Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.