BF4M HIROSE

Document overview

  • PDF pages: 8

Technical content

Page 1

PDF page 1 diagram
PDF page 1 diagram

Overview

Hirose developed the micro "BF4MC connector" that enables optical transmission of data between boards that are incorporated in devices. It converts an electrical signal that is received from a board by using the semiconductor component built-in the connector, and transfers the data via optical fiber. BF4MC connector is a revolutionary design that enables easy use of electromagnetic noise-free, insulated, longdistance, high-speed transmission. These are the merits of the optical transmission, mounted inside devices achieving dramatic downsizing and lower power consumption when compared to existing optical products. It can be used in a wide range of applications, medic

alappliances Measurement equipments, FA system etc.

Features

1. Optical transmissions achieved by

simplified electrical connections

Optical signal transmission is accomplished with electronic connectors and has eliminated the need for cleaning the mating faces of traditional fiber optic connectors.

2. High-speed, signal transmissions with

no EMI noise.

Optical signal transmissions rated up to 6.25 Gbps are possible. Since there is no EMI noise to contend with on the signal lines, system design time is reduced.

3. Highly flexible optical fiber

Assemblies are made with a highly flexible, optical fiber that allows for tight bend radiuses when used in small devices.

4. Long-distance, high-speed and high

quality signal transmissions

The BM4M design is capable of high speed and high quality signal transmissions even over long transmission distances.

5. Low power consumption

Power consumption is significantly reduced compared to conventional optical transceiver.

PDF page 1 diagram
PDF page 1 diagram
PDF page 1 diagram

6. Space-saving and low profile

design with 1.5mm height

By using the BF4M, optical transmissions can be achieved with small form factor electronic connectors that save on overall size and valuable PCB space.

In cases where the application will demand a high level of reliability, such as automotive,

2016.2e

please contact a company representative for further information.

Page 2

Electrical characteristics

Electrical characteristics of BF4MC-TX (transmitter side)

Min Nominal Max Unit
Transmission speed (8B/10B) 0.05 ---------- 6.25 Gbps
VDD voltage 2.25 2.5/3.3 3.6 V
ACTIVATE = H voltage 1.0 ---------- VDD voltage V
DIN common voltage 150 ---------- 340 mVp
DIN differential voltage 200 ---------- 1400 mVp

Electrical characteristics of BF4MC-RX (receiver side)

Min Nominal Max Unit Remarks
Transmission speed (8B/10B) 0.05 ---------- 6.25 Gbps ----------
VDD voltage 2.25 2.5/3.3 3.6 V ----------
VDD 15 voltage 1.45 1.5 1.55 V When driving with dual power sources
DOUT common voltage 160 ---------- 330 mVp ----------
DOUT differential voltage 160 ---------- 330 mVp ----------
SD = H voltage 1.0 1.5 1.6 V ----------
Imon 20.0 ---------- ---------- uA For internal inspection

<Pin Assignment>

BF4MC-TX Plug

BF4MC-RX Plug

Fiber

Fiber

GND 1

20 GND

GND 1

20 GND

GND 2

GND 2

19 GND

19 GND

GND 3

GND 3 18 GND

18 GND 17 EN

17 ACTIVE Imon 4

VDD 4

16 NC

SD 5 16 NC

GND 5

15 VDD15

VDD 6 15 NC

FILT 6

14 GND

GND 7

14 GND

GND 7 13 DIN-

DIN+ 8

DOUT- 8

13 DOUT+

12 GND GND 9

GND 9

12 GND

11 GND

11 GND GND 10

GND 10

Top View

<Pin Functions>

Descriptions of BF4MC-TX pins

Synbol Name Type Details
VDD Vsupply Power Power Supply DC+2.5 or +3.3V
GND Ground Ground -------
ACTIVE Activate Input H voltage:Active mode L voltage:Sleep mode
FILT Filter ------- Decouping condenser connection contact
DIN+ Data input + Input Differential Data Input
DIN– Data input – Input
NC Not Connect ------- Not connected in normal operation

Descriptions of BF4MC-RX pins

Synbol Name Type Details
VDD Vsupply Power Power for PD(*)
VDD15 Vdd1.5V Power Power for Core(*)
GND Ground Ground -------
SD Signal Detect Output H voltage:Detected L voltage:Undetected
DOUT+ Data Output + Output Differential Data Output
DOUT– Data Output – Output
EN Regulator Enable Input [Dual supply mode] Not connected [Single supply mode] EN pin must be connect to VDD
Imon Mirrored photodiode current monitor Output Not connected(Inspection pin)
NC Not Connect ------- Not connected in normal operation

(\*): For details, see Hirose's technical specifi cation ETAD-K0671.

Page 3

Product Materials

Plug harnesses

Port Details
Transmitter plug(TX) Housing LCP(BF4MC:White)
Contact Phosphor bronze (Au plating)
Plate Phosphor bronze (Ni plating)
VCSEL GaAs
VCSEL driver Si(CMOS)
Bonding wire Au
Sealing resin Epoxy resin
Heat shrink tubing Polyolefi n(Black)
Receiver plug(RX) Housing LCP(BF4MC:White)
Contact Phosphor bronze (Au plating)
Plate Phosphor bronze (Ni plating)
PD GaAs
TIA/LA Si(CMOS)
Bonding wire Au
Sealing resin Epoxy resin
Heat shrink tubing Polyolefi n(Black)
Optical fi ber Fiber Silica glass (GI50/80)
Coating UV curable resin/Thermo plastic resin(Ø0.5)

Receptacles

Port Details
Transmitter Receptacle(TX) and Receiver Receptacle(RX) Housing LCP(Black)
Contact Phosphor bronze (Au plating)
Shell Phosphor bronze (Au plating)

Composition of Product Number

Refer to the product number to determine the product specifi cations.

Plug harness

Receptacle

BF4 - TX - 14 DS - 0.5 V (01)

BF4M C-6G TX RX - B1 - 75MM

❶ ❷ ❸ ❹

❺ ❻

❶ ❷ ❸ ❹

❺ ❻ ❼

PDF page 3 diagram
PDF page 3 diagram

Page 4

PDF page 4 diagram

Connection example of +3.3 V (single power supply mode)

Page 5

PDF page 5 diagram
PDF page 5 diagram
Part No. HRS No. Fiber Cable length L
BF4MC-6GTXRX-B1-45MM 831-1102-0 04 Ø0.5 Red 45 mm
BF4MC-6GTXRX-B1-50MM 831-1102-0 05 50 mm
BF4MC-6GTXRX-B1-55MM 831-1102-0 06 55 mm
BF4MC-6GTXRX-B1-60MM 831-1102-0 07 60 mm
BF4MC-6GTXRX-B1-65MM 831-1102-0 08 65 mm
BF4MC-6GTXRX-B1-70MM 831-1102-0 09 70 mm
BF4MC-6GTXRX-B1-75MM 831-1102-0 00 75 mm
BF4MC-6GTXRX-B1-80MM 831-1102-0 11 80 mm
BF4MC-6GTXRX-B1-85MM 831-1102-0 12 85 mm
BF4MC-6GTXRX-B1-90MM 831-1102-0 13 90 mm
BF4MC-6GTXRX-B1-95MM 831-1102-0 14 95 mm
BF4MC-6GTXRX-B1-100MM 831-1102-0 15 100 mm
BF4MC-6GTXRX-B1-1M 831-1109-9 00 1 m
BF4MC-6GTXRX-B1-2M 831-1109-9 01 2 m
BF4MC-6GTXRX-B1-3M 831-1109-9 02 3 m
BF4MC-6GTXRX-B1-4M 831-1109-9 03 4 m
BF4MC-6GTXRX-B1-5M 831-1109-9 04 5 m

Length (L) of the harness

  • The shortest harness length is 45mm, and the harness up to 100mm in length is available in 5mm increments. (45mm, 50mm, 55mm …, 100mm)
  • Harness longer than those listed above is also available upon request. Please inform us of your desired harness length.
  • Blue Fiber color is also available. Contact your sales representative for details.

Page 6

Receptacle: Transmitter (TX)

10.25

95 9.5 3 P=0.5±0.05 (2.05) Vacuum pick up area
4. 2 (0.25) (1.75) .48±0.1
PDF page 6 diagram

3mm

Vacuum 2.1mm pick up area

  • The structure is designed so that the receiver (RX) plug does not mate.
Part No. HRS No. Package s
BF4-TX-14DS-0.5V 831-0008-6 00 500
BF4-TX-14DS-0.5V(01) 831-0008-6 01 1000
BF4-TX-14DS-0.5V(02) 831-0008-6 02 2000
BF4-TX-14DS-0.5V(10) 831-0008-6 10 10 p
BF4-TX-14DS-0.5V(11) 831-0008-6 11 100

Package specifi cations 500 pcs/reel 1000 pcs/reel 2000 pcs/reel 10 pcs/pack 100 pcs/reel

Receptacle: Receiver (RX)

10.25

95 9.5 3 P=0.5±0.05 (1.75) Vacuum pick up area
4. 2. (0.25) (2.05) 1.48±0.1
PDF page 6 diagram

3mm

Vacuum 2.1mm pick up area

  • The structure is designed so that the transmitter (TX) plug does not mate.
Part No. HRS No. Package s
BF4-RX-14DS-0.5V 831-0009-9 00 500
BF4-RX-14DS-0.5V(01) 831-0009-9 01 1000
BF4-RX-14DS-0.5V(02) 831-0009-9 02 2000
BF4-RX-14DS-0.5V(10) 831-0009-9 10 10 p
BF4-RX-14DS-0.5V(11) 831-0009-9 11 100

Package specifi cations 500 pcs/reel 1000 pcs/reel 2000 pcs/reel 10 pcs/pack 100 pcs/reel

Receptacle:Pattern Layout

Recommended PCB land pattern dimensions

Recommended stencil dimensions

PDF page 6 diagram

( ) Pads for contacts: 70% Pads for shell: 100%

Page 7

Packaging Specifications for the receptacles

Reel dimensions

Emboss carrier tape dimensions

t=0.3±0.05

PDF page 7 diagram
PDF page 7 diagram

1.6±0.1

Recommended refl ow temperature profi le (lead-free solder)

Recommended reflow temperature profile (lead-free solder)

MAX 250℃

PDF page 7 diagram
PDF page 7 diagram
Part No. HRS No. Packing specifications
BF4-T2 831-0006-0 00 1 piece

(2.6)

PDF page 7 diagram

Page 8

Cautions

Do not pull the fiber when removing the connector.

When removing the connector, make sure to hook the plug with an extraction tool so that the stress is not

applied to the cable. Pulling the cable to remove it may cause a breakage in the cable

PDF page 8 diagram
PDF page 8 diagram

regarding the connector (hereafter, the Product) is subject to change without prior notice. (Prohibition of reproduction)

  • No part of this document may be copied or reproduced without prior written consent of Hirose Electric Co., Ltd. (hereafter, Hirose). Even if written consent of Hirose is obtained, it is prohibited to amend any part of this document and copy or reproduce it. Hirose shall assume no obligation or liability in connection with such amended information or reproduction.

(Responsibilities for design safety)

  • Hirose shall assume no responsibilities for the support for the application of the Product or the product design of the customer. The customer shall be responsible for the product and application of the customer in which the Product is used. The customer shall take appropriate design and operational safety measures in order to minimize the potential risks predicted for the product and application of the customer in which the Product is used.

(Responsibilities for determination of the suitability)

  • When using the Product, the customer shall ensure safe design at his/her own responsibility so that malfunction or failure of the Product would never cause an infringement on the life, body or property. For design or use of the Product, make sure to refer to the materials (including the catalog, specifications, and design note) and follow the same. When using information including the product data provided in the document, technical data or circuit examples shown in the figures and tables, the customer shall evaluate the information on the customer’s product and determine the suitability at the customer’s own responsibility.

(Responsibilities for specific applications)

  • Make sure to consult with our sales representative in advance when considering of use for specific applications that require extremely high quality and reliability (e.g. nuclear equipment, aerospace systems, transportation equipment and various safety related equipment).

(Prohibition of replication)

  • Do not disassemble reverse-engineer, modify, analyze or replicate the Product.

(Prohibition of application to prohibited products)

  • The Product must not be used for any product that manufacture, use and sale of which is prohibited by the domestic or international laws, regulations and ordinances.

(Notes on the guarantee and license)

  • The technical data provided in the materials of the Product is intended to describe the representative behaviors and application of the Product. It is not to guarantee the intellectual property rights or any other rights of Hirose nor a third party and not to grant the license.

(Notes on the warranties for the contract)

  • Unless otherwise provided in a written contract or other documents (specifications) agreed between the customer and Hirose, Hirose makes no warranties of any kind (including, but not limited to, warranties of the function and operation, warranties of merchantability, warranties of suitability for a specific application or purpose and warranties of correctness of the information).
PDF page 8 diagram

(Prohibition of weapons of mass destruction and military purposes)

  • It is prohibited to use the Product or the technical information contained in this document for any military purposes, including but not limited to, development of weapons of mass destruction.

(Notes on export)

  • To export the Product to other countries, the exporter shall conduct the applicability determination based on Foreign Exchange and Foreign Trade Act of Japan. If you wish to have the applicability determination sheet issued by Hirose, contact our sales representative. Note that in the export arrangement, the customer shall be an exporter and responsible for compliance with all the applicable laws and regulations and terms and conditions of the agreement with Hirose.

Notes on use of the product

(Notes on the specification range)

  • Using the Product under conditions beyond the specification range (for voltage, current and temperature) provided in this document may result in an accident (including ignition, heat generation, and smoking). Confirm the document thoroughly and make sure to use the Product within the specification range.

(Notes on the laser)

  • The laser beam is emitted from the end-face of the optical fiber in operation. It may cause eye injury or loss of sight if it enters the eyes. Do not stare directly into the end-face of the optical fiber. The laser beam is emitted from the VCSEL in operation. It may not be visible depending on its wavelength, but nonetheless it may cause eye injury or loss of sight if the laser beam or its reflected beam enters the eyes. Do not stare (look into) the laser beam directly.

(Notes on fracture of the optical fiber)

  • In case of fracture of the optical fiber used in the Product, turn off the power immediately. In addition, Use care when handling it to avoid injury from fractured parts or fragments.

(Notes on use of GaAs)

  • The Product is equipped with a semiconductor within the connector and contains gallium arsenide (GaAs).

(Notes on the environment including gases)

  • Avoid the use of the Product in gas environments with chlorides or sulfides. The Product may deteriorate and features may be affected.

(Notes on storage)

  • Store the Product out of corrosive substances, corrosive gases, high temperature and humidity or direct sunlight. Do not apply excessive pressure or vibration to the Product. It may cause deterioration, deformation, damage or failure of the Product.

(Notes on resin molded part)

  • The resin molded part of the Product may contain black spots or its color may be slightly different, but that has no effect on the product performance.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 02/2016. Contents are subject to change without notice for the purpose of improvements.