BC856ALT1

BC856ALT1 - General Purpose Transistors PNP Silicon

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 9

Technical content

Features

• S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating Symbol Value Unit Collector-Emitter Voltage BC856, SBC856 BC857, SBC857 BC858, NSVBC858, BC859 VCEO −65 −45 −30 V Collector-Base Voltage BC856, SBC856 BC857, SBC857 BC858, NSVBC858, BC859 VCBO −80 −50 −30 V Emitter−Base Voltage VEBO −5.0 V Collector Current − Continuous IC −100 mAdc Collector Current − Peak IC −200 mAdc THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Total Device Dissipation FR−5 Board, (Note 1) TA = 25°C Derate above 25°C PD 225 1.8 mW mW/°C Thermal Resistance, Junction−to−Ambient R/C0113JA 556 °C/W Total Device Dissipation Alumina Substrate, (Note 2) TA = 25°C Derate above 25°C PD 300 2.4 mW mW/°C Thermal Resistance, Junction−to−Ambient R/C0113JA 417 °C/W Junction and Storage Temperature TJ, Tstg −55 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. SOT−23 (TO−236) CASE 318 STYLE 6 COLLECTOR BASE EMITTER See detailed ordering and shipping information in the package dimensions section on page 6 of this data sheet.

ORDERING INFORMATION

/C0071 xx = Device Code xx = (Refer to page 6) M = Date Code* /C0071=P b−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location.

www.onsemi.com ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Collector−Emitter Breakdown Voltage BC856, SBC856 Series (IC = −10 mA) BC857, SBC857 Series BC858, NSBVC858 BC859 Series V(BR)CEO −65 −45 −30 V Collector−Emitter Breakdown Voltage BC856 S, SBC856eries (IC = −10 /C0109A, VEB = 0) BC857A, SBC857A, BC857B, SBC857B Only BC858, NSVB858, BC859 Series V(BR)CES −80 −50 −30 V Collector−Base Breakdown Voltage BC856, SBC856 Series (IC = −10 /C0109A) BC857, SBC857 Series BC858, NSVBC858, BC859 Series V(BR)CBO −80 −50 −30 V Emitter−Base Breakdown Voltage BC856, SBC856 Series (IE = −1.0 /C0109A) BC857, SBC857 Series BC858, NSVBC858, BC859 Series V(BR)EBO −5.0 −5.0 −5.0 V Collector Cutoff Current (VCB = −30 V) Collector Cutoff Current (VCB = −30 V, TA = 150°C) ICBO − −15 −4.0 nA /C0109A ON CHARACTERISTICS DC Current Gain BC856A, SBC856A, BC857A, SBC857A, BC858A (IC = −10 /C0109A, VCE = −5.0 V) BC856B, SBC856B, BC857B, SBC857B, BC858B, NSVBC858B BC857C, SBC857C BC858C (IC = −2.0 mA, VCE = −5.0 V) BC856A, SBC856A, BC857A, SBC857A, BC858A BC856B, SBC856B, BC857B, SBC857B, BC858B, NSVBC858B, BC859B BC857C, SBC857C, BC858C, BC859C hFE − 125 220 420 150 270 180 290 520 250 475 800 Collector−Emitter Saturation Voltage (IC = −10 mA, IB = −0.5 mA) (IC = −100 mA, IB = −5.0 mA) VCE(sat) −0.3 −0.65 V Base−Emitter Saturation Voltage (IC = −10 mA, IB = −0.5 mA) (IC = −100 mA, IB = −5.0 mA) VBE(sat) −0.7 −0.9 V Base−Emitter On Voltage (IC = −2.0 mA, VCE = −5.0 V) (IC = −10 mA, VCE = −5.0 V) VBE(on) −0.6 −0.75 −0.82 V SMALL−SIGNAL CHARACTERISTICS Current−Gain − Bandwidth Product (IC = −10 mA, VCE = −5.0 Vdc, f = 100 MHz) fT 100 − − MHz Output Capacitance (VCB = −10 V, f = 1.0 MHz) Cob − − 4.5 pF Noise Figure (IC = −0.2 mA, VCE = −5.0 Vdc, RS = 2.0 k/C0087, f = 1.0 kHz, BW = 200 Hz) BC856, SBC856, BC857, SBC857, BC858, NSVBC858 Series BC859 Series NF 4.0 dB SWITCHING CHARACTERISTICS Delay Time (VCC = −3.0 Vdc, IC = −10 mA, IE = −1 mA) td − 35 − ns Rise Time (VCC = −3.0 Vdc, IC = −10 mA, IE = −1 mA) tr − 25 − ns Storage Time (VCC = −3.0 Vdc, IC = −10 mA, IE = −1 mA) ts − 310 − ns Fall Time (VCC = −3.0 Vdc, IC = −10 mA, IE = −1 mA) tf − 40 − ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.

www.onsemi.com Device Marking Package Shipping† BC856ALT1G 3A SOT−23 (Pb−Free) 3,000 / Tape & Reel SBC856ALT1G* BC856ALT3G 10,000 / Tape & Reel BC856BLT1G 3B SOT−23 (Pb−Free) 3,000 / Tape & Reel SBC856BLT1G* BC856BLT3G 10,000 / Tape & Reel SBC856BLT3G* BC857ALT1G 3E SOT−23 (Pb−Free) 3,000 / Tape & Reel SBC857ALT1G* BC857BLT1G 3F SOT−23 (Pb−Free) 3,000 / Tape & Reel SBC857BLT1G* BC857BLT3G 10,000 / Tape & Reel NSVBC857BLT3G* BC857CLT1G 3G SOT−23 (Pb−Free) 3,000 / Tape & Reel SBC857CLT1G* BC857CLT3G 10,000 / Tape & Reel BC858ALT1G 3J SOT−23 (Pb−Free) 3,000 / Tape & Reel BC858BLT1G 3K SOT−23 (Pb−Free) NSVBC858BLT1G* BC858BLT3G SOT−23 (Pb−Free) 10,000 / Tape & Reel BC858CLT1G 3L SOT−23 (Pb−Free) 3,000 / Tape & Reel BC858CLT3G SOT−23 (Pb−Free) 10,000 / Tape & Reel BC859BLT1G 4B SOT−23 (Pb−Free) 3,000 / Tape & Reel BC859BLT3G SOT−23 (Pb−Free) 10,000 / Tape & Reel BC859CLT1G 4C SOT−23 (Pb−Free) 3,000 / Tape & Reel BC859CLT3G SOT−23 (Pb−Free) 10,000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable.

SOT−23 (TO−236) 2.90x1.30x1.00 1.90P CASE 318 ISSUE AU DATE 14 AUG 2024 SCALE 4:1 XXXM/C0071 /C0071 XXX = Specific Device Code M = Date Code /C0071= Pb−Free Package GENERIC MARKING DIAGRAM* *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “/C0071”, may or may not be present. Some products may not follow the Generic Marking. STYLES ON PAGE 2 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. 98ASB42226BDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 2SOT−23 (TO−236) 2.90x1.30x1.00 1.90P © Semiconductor Components Industries, LLC, 2019 www.onsemi.com

SOT−23 (TO−236) 2.90x1.30x1.00 1.90P CASE 318 ISSUE AU DATE 14 AUG 2024 STYLE 22: PIN 1. RETURN 2. OUTPUT 3. INPUT STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 7: PIN 1. EMITTER 2. BASE 3. COLLECTOR STYLE 8: PIN 1. ANODE 2. NO CONNECTION 3. CATHODE STYLE 9: PIN 1. ANODE 2. ANODE 3. CATHODE STYLE 10: PIN 1. DRAIN 2. SOURCE 3. GATE STYLE 11: PIN 1. ANODE 2. CATHODE 3. CATHODE −ANODE STYLE 12: PIN 1. CATHODE 2. CATHODE 3. ANODE STYLE 13: PIN 1. SOURCE 2. DRAIN 3. GATE STYLE 14: PIN 1. CATHODE 2. GATE 3. ANODE STYLE 15: PIN 1. GATE 2. CATHODE 3. ANODE STYLE 16: PIN 1. ANODE 2. CATHODE 3. CATHODE STYLE 17: PIN 1. NO CONNECTION 2. ANODE 3. CATHODE STYLE 18: PIN 1. NO CONNECTION 2. CATHODE 3. ANODE STYLE 19: PIN 1. CATHODE 2. ANODE 3. CATHODE −ANODE STYLE 23: PIN 1. ANODE 2. ANODE 3. CATHODE STYLE 20: PIN 1. CATHODE 2. ANODE 3. GATE STYLE 21: PIN 1. GATE 2. SOURCE 3. DRAIN STYLE 1 THRU 5: CANCELLED STYLE 24: PIN 1. GATE 2. DRAIN 3. SOURCE STYLE 25: PIN 1. ANODE 2. CATHODE 3. GATE STYLE 26: PIN 1. CATHODE 2. ANODE 3. NO CONNECTION STYLE 27: PIN 1. CATHODE 2. CATHODE 3. CATHODE STYLE 28: PIN 1. ANODE 2. ANODE 3. ANODE onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. 98ASB42226BDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 2 OF 2SOT−23 (TO−236) 2.90x1.30x1.00 1.90P © Semiconductor Components Industries, LLC, 2019 www.onsemi.com

onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales