BAI-003 ITT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 1

Technical content

rm)

2 BAI-003 SMB / SMC Straight Connectors, Crimp Type for Braided Cable

i~] tJ) 3° - g f a= [E ° INSULATOR BODY VU E STEP 1 1. Slide ferrule on cable. = — 2. Trim cable to dimensions shown taking care not to nick braid or center [o) conductor. ° a! wn STEP 2 5 Assembly Instruction No. A B Cc ea] Le 3. Tin center conductor (DO NOT OVER TIN). STEP 4 4. Slide rear body over cable dielectric and under the braid until the braid is er flush against the rear of the hexagonal nut. NOTE: When using cables with ORR ata ib 1a i ce i —__ |e Lt inflexible jackets two 3,17 (.125) slits in the outer jacket are permissible. 5. Slide on rear insulator so that the counterbore rests against the cable dielectric. 6. Place a small solder preform made from 0,26 - 0,31 (.010 - .012) dia (28 swg) multi-core solder in rear of contact. 7. Assemble contact on center conductor, heat to make solder connection STEP 5 ensuring shoulder of contact is flush against rear insulator. NOTE: Do not Oe allow solder to protrude outside spill hole. § ERR | — — Fea Lb 8. Slide ferrule against body and crimp using Cannon’s Crimp Tool and suitable Die Set (see table below). STEP 7 9. Slide on front insulator (if not already assembled in body). got + — Fea] [te 10. Screw on front body and tighten to 0,63 - 0,70 Nm (90 - 100 in. ozs.) pot Only common cable retention features are shown in detail. Various body configurations can apply. STEP 8 a Cable Numbers Cable Code Die Size Die Set RG142/U 9052 5,41 (.213) K29265 STEP 10 RG196/U 3196 2,67 (105) _ K29263 — TE RG316/U 0000 3,25 (128) _ K29263 RD316 9399 3,84 (151) 11025/9 Dimensions are shown: mn (neh) Sistas Sal deena eet ange Y ITT Industries www. ittcannon.com 50 Engineered for life