2SB1392 HITACHI
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Silicon PNP Triple Diffused Application Low frequency power amplifier Outline 1. Base 2. Collector 3. Emitter TO-220FM 1 2 3 Absolute Maximum Ratings (Ta = 25°C) Item Symbol Ratings Unit Collector to base voltage V CBO –70 V Collector to emitter voltage V CEO –60 V Emitter to base voltage V EBO –5 V Collector current I C –4 A Collector peak current I C(peak) –8 A Collector power dissipation P C 2W PC *1 25 Junction temperature Tj 150 °C Storage temperature Tstg –55 to +150 °C Note: 1. Value at TC = 25°C.
Electrical Characteristics (Ta = 25°C) Item Symbol Min Typ Max Unit Test conditions Collector to base breakdown voltage V(BR)CBO –70 — — V I C = –10 mA, IE = 0 Collector to emitter breakdown voltage V(BR)CEO –60 — — V I C = –50 mA, RBE = ¥ Emitter to base breakdown voltage V(BR)EBO –5 — — V I E = –10 mA, IC = 0 Collector cutoff current I CBO — — –10 mAV CB = –50 V, IE = 0 ICEO — — –10 V CE = –50 V, RBE = ¥ DC current transfer ratio hFE1 *2 60 — 200 V CE = –4 V, IC = –1 A*1 hFE2 35 — — V CE = –4 V, IC = –0.1 A*1 Base to emitter voltage V BE — — –1.0 V V CE = –4 V, IC = –1 A*1 Collector to emitter saturation voltage VCE(sat) — — –1.0 V I C = –2.0 A, IB = –0.2 A*1 Base to emitter saturation voltage VBE(sat) — — –1.2 V I C = –2.0 A, IB = –0.2 A*1 Notes: 1. Pulse test. 2. The 2SB1392 is grouped by hFE1 as follows. BC 60 to 120 100 to 200 0 50 100 150 Case Temperature TC (°C) Collector power dissipation Pc (W) Maximum Collector Dissipation Curve –0.01 –0.02 –0.05 –0.1 –0.2 –0.5 –1.0 –10 Collector to emitter Voltage VCE (V) Collector Current IC (A) Area of Safe Operation iC (peak) IC (max) Ta = 25°C
1 Shot pulse
C = 25 °C) PW = 10 ms1 ms
Collector to emitter Voltage VCE (V) Collector Current IC (A) Typical Output Characteristics IB = 0 TC = 25°C –10 mA –20 –30 –40 –50–70–80 –60 –100 100 300 1,000 Collector current IC (A) DC current transfer ratio hFE DC Current Transfer Ratio vs. Collector Current TC = 75°C 25°C –25°C VCE = –4 V –0.01 –0.1 –0.3 –1.0 –0.03 Collector current IC (A) Collector to emitter saturation voltage VCE (sat) (V) Saturation Voltage vs. Collector Current lC /lB = 10 TC = 25°C 25°C –25°C 1.0 0.3 0.1 1m 10m 100m 1.0 10 100 1000 TC = 25°C Thermal resistanceθj-c (°C/W) Transient Thermal Resistance
10.0 – 0.3 12.0 – 0.3 0.6 2.8 – 0.2 2.5 – 0.2 0.5 – 0.1 2.5 4.45 – 0.3 5.0 – 0.3 2.0 – 0.3 0.7 – 0.1 1.2 – 0.2 1.4 – 0.2 φ Hitachi Code JEDEC EIAJ Weight (reference value) TO-220FM Conforms 1.8 g Unit: mm
- Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as fail- safes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 Copyright © Hitachi, Ltd., 1999. All rights reserved. Printed in Japan. Hitachi Asia Pte. Ltd.
16 Collyer Quay #20-00
Tel: 535-2100 Fax: 535-1533 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HXHitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Fax: <49> (89) 9 29 30 00 Hitachi Semiconductor (America) Inc.
179 East Tasman Drive,
San Jose,CA 95134 For further information write to: