AV090003A940N

AV090003A940N ETC

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 31

Technical content

B2-76 APEM www.apem.com AV series Anti-vandal and security pushbutton switches Distinctive features ❑ Attractive, robust and durable

• Irremovable
• Anti-jamming construction : reduced travel to prevent insertion of foreign parts
• Contact and mechanism protected against crushing
• Fire resistant
• Long life Different bushing sizes and actuator shapes ❑ Sealed versions ❑ Degree of protection of sealed versions (switches mounted on vertical panels) : IP65 to IP67 or IP69K depending on models ❑ UL/CSA approved models Packaging unit : specified on the following pages. Mounting accessories : Standard and special hardware are presented in section I. EXAMPLES OF MOUNTING FOR SEALED VERSIONS Preferred For thin panels With boot U2187 (sect. H) ➞ Gasket Sealing boots are available for models with Ø 19 mm (.748) bushing. See Section H. Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. The AV series is a large range of very robust pushbutton switches, consisting of 2 families : ANTI-VANDAL PUSHBUTTON SWITCHES (pages 77-79)
• Great robustness (impact resistance IK08 (Ø 19 mm) and IK10 (Ø 22 mm)
• Actuator and bushing : stainless steel
• Bushing Ø 19 mm (.748) or 22 mm (.866 SECURITY PUSHBUTTON SWITCHES (pages 80-106)
• Large variety of models
• Actuator and bushing : nickel plated, chrome plated or polished varnished brass, stainless steel
• Bushing diameter 16 mm (.629), 19 mm (.748), 22 mm (.866) or 24 mm (.944)
• Marking, illumination, tactile feedback
• Numerous electrical functions (momentary or maintained) 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page76

APEM www.apem.com B2-77 AV series Anti-vandal pushbutton switches Distinctive features and specifications SPECIFICATIONS

• Max. current/voltage rating with resistive load : - A contacts : 4A 12VDC, 500.000 cycles - C contacts : 2A 48 VDC, 10.000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 3 sec. max.
• Packaging unit : 20 pieces (models Ø 22) or 40 pieces (models Ø 19) MATERIALS
• Case : PBT
• Contacts : silver (A) or brass, silver plated (C)
• Bushing : stainless steel
• Actuator : stainless steel CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755) or Ø 22,2 mm (.874)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) ROBUSTNESS SEALING ( OPTION T ) Model Ø 19 mm (.748) Model Ø 22 mm (.866) Degree of protection according to EN 50102, June 95 (NFC 20-015) Hammer radius 25 mm Hammer radius 50 mm IK08 Striking energy: 5 joules (5Nm) 1.7 Kg 29.5 cm IK10 Striking energy: 20 joules (20Nm) 5 Kg 40 cm ❑ Very robust Impact resistance IK08 for model Ø 19 mm (.748) and IK10 for model Ø 22 mm (.866) ❑ Stainless steel actuator and bushing ❑ UL-CSA approved (long case only) ➀ internal gasket ➁ external gasket Front panel sealing (IP65) Option N does not include ➀ nor ➁. Increased impact resistance provided by a nut or mechanical stop. 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page77

B2-78 APEM www.apem.com AV series Anti-vandal pushbutton switches Ø 19 mm (.748) Momentary (NO) NO (function 3) Flat actuator - short case - 48VDC - AV09100 Hex nut 22 (.866) across flats 7.30 (.287) 2.00 (.078) (.374) 9.50 6.50 (.255) (.118) 3.00 ø19.00x1.00 SI (.748DIAx1.00 IS) 3.00 (.118) (.866DIA) ø22.00 ø15.00 (.590DIA) (.866DIA) ø22.00 (.196) 5.00 EPOXY2.80x0.5 (.110x.019) 1.20 (.047) 2.80 (.110) Screw terminals AV091003•940• Solder lug / quick-connect term. AV091003•240• ORDER FORMAT Flat actuator - long case - 4A 250VAC/8A125VAC - UL/CSA - AV09000 Hex nut 22 (.866) across flats 6.50 (.255) (.283) 7.20 (.456) 11.60 (.196) 5.00 2.00 (.078) Ø22.00 (.866DIA) Ø19.00x1.00 SI3.00 Ø22.00 Ø15.00 (.866DIA) (.590DIA) (.748DIAx1.00 IS)(.118) Screw terminals AV090003A940• Curved actuator - AV19 Screw terminals AV19•003•940• Solder lug/quick-connect term. (short case) AV191003•240• Flush model - AV9D Screw terminals Panel cut-out AV9D•003•940• Solder lug / quick-connect terminals (short case only) AV9D1003•240• In the following model numbers, replace • with elements selected in the above order format. (.078) (.590DIA) (.866DIA) 2.00 Ø15.00 Ø22.00 (.141) 3.60 (.866DIA) Ø22.00 (.047) 1.20 (.874DIA Min.) (.755DIA) Ø19.20 Ø22.20 Mini (.051 Min.)

1.30 Mini

Screw terminals for wires 1,5 mm2 max. Screw terminals for wires 1,5 mm2 max. Actuator type

09 Flat

19 Curved

000 Long

100 Short

C Brass, silver pl. Terminals

9 Screw

2 Quick-

Bush./act. material

40 Stainless

To order switches marked UL-CSA, add “UU”at the end of model number. 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page78

APEM www.apem.com B2-79 AV series Anti-vandal pushbutton switches Ø 22 mm (.866) Momentary (NO) Flat actuator - long case - 4A 250VAC/8A125VAC - UL/CSA - AV03000 Flat actuator - short case - 48VDC - AV03100 Hex nut 25 (.984) across flats ø22.00x1.00 SI (.866DIAx1.00 IS) 5.00 (.196) 6.30 (.248)(.500) 12.70 3.00 (.118)(.078) 2.00 ø15.00 (.59DIA) ø25.00 (.984DIA) EPOXY2.80x0.5 (.110x.019) (.110) 2.80 (.287) 7.30 (.047) 1.20 Screw terminals AV031003•940• Solder lug / quick-connect term. AV031003•240• Screw terminals AV030003A940• Hex nut 25 (.984) across flats Ø22.00x1.00 SI (.866DIAx1.00 IS) 5.00 (.196) 10.00 (.248)(.590) 15.00 3.00 (.118)(.078) 2.00 Ø15.00 (.59DIA) Ø25.00 (.984DIA) Curved actuator - AV02 Screw terminals AV02•003•940• Solder lug / quick-connect (short case) AV021003•240• Flatted bushing - AVM3 and AVM2 Flat actuator, screw terminals AVM3•003•940• Curved actuator, screw terminals AVM2•003•940• Panel cut-out 3.60 (.141) (.078) 2.00 Ø15.00 (.590DIA) Ø25.00 (.984DIA) (.984DIA) Ø25.00 (.590DIA) Ø15.00 (.393 10.00 Ø22.20 (.874DIA) NO (function 3) ORDER FORMAT In the following model numbers, replace • with elements selected in the above order format. Screw terminals for wires 1,5 mm2 max. Screw terminals for wires 1,5 mm2 max. Bushing/act. configuration 03 Flat act. 02 Curved act. M3 Flat act + flatted bush. M2 Curved act.+ flatted bush. SERIES Case C Brass, silver pl. Terminals Bush./act. material To order switches marked UL-CSA, add “UU” at the end of model number. 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page79

B2-80 APEM www.apem.com AV series Snap action security pushbutton switches Ø 16 mm (.629) Momentary (NO) NO (function 3) SPECIFICATIONS

• Max. current/voltage rating with resistive load : 200mA 48 VDC - 100mA 48VDC
• Initial contact resistance : 50 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 50.000 cycles at 200mA 48VDC 100.000 cycles at 100mA 48VDC
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Packaging unit : 60 pieces MATERIALS
• Case : PBT
• Contacts : brass, silver plated (C)
• Bushing and actuator : see “Options” page CUT-OUT
• Panel cut-out : Ø 16,2 mm (.637)
• Min. pitch for matrix mounting : 24 mm x 24 mm (.944 x .944) (AV6P & AV6B : 20 mm x 20 mm) ORDER FORMAT Flat or curved actuator - screw terminals Hex nut 19 (.748) across flats (.708DIA) Ø18.00 (.118) 3.00 3.00 (.118) 11.209.501.50 Ø16.00X1.00 SI Ø12.00 (.629DIAX1.00 IS) (.440)(.374)(.059) (.472DIA) Flat actuator AV0630C9 Curved actuator AV1630C9 BASIC MODEL To order a product, select a basic model below and add the desired options. Screw terminals for wires 1,5 mm2 max. See “Options” page. Bushing/act. configur.

06 Flat actuator

16 Curved actuator

08 Curved act.+chamfer 07 Flat act.+chamfer 6P Flat act.+knurled nut 6B Curved act.+knurled nut SERIES Function 3 NO Case

0 Short

C Brass, silver pl. Terminals Curved actuator Flat actuator AV0830C9 AV0730C9 (.059) 1.50 (.078) 2.00 With knurled nut for matrix mounting 20 x 20 - AV6P and AV6B Flat actuator Curved actuator AV6P30C9 AV6B30C9 (.708DIA) Ø18.00 Ø12.00 (.472DIA) Ø18.00 (.708DIA) (.708DIA) Ø18.00 (.472DIA) Ø12.00 Ø18.00 (.708DIA) (.787) 20.00 (.787) 20.00 (.787) 20.00 Wrench available under P/N U1990. 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page80

APEM www.apem.com B2-81 AV series Security pushbutton switches Ø 16 mm (.629) Latching action Quick-connect terminals Flat actuator Curved actuator AV0611A8 AV1611A8 Straight PC terminals Flat actuator Curved actuator AV0611A4 AV1611A4 5.08 (.200) 0.50 (.019) 1.10 (.043) EPOXY 3.50 (.137) SPECIFICATIONS

• Max. current/voltage rating with resistive load : 1A 24VDC
• Initial contact resistance : 50mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.500 Vrms 50 Hz min. between terminals 1 000 Vrms 50 Hz between terminals and frame
• Electrical life : 100.000 cycles at 1,5A 250VAC 40.000 cycles at 1A 24VDC
• Torque : 5 Nm min. - 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 200.000 cycles
• Hand soldering : 300°C, 5 sec. max.
• Packaging unit : 25 pieces OFF ON MATERIALS
• Case : PA-6T, UL94-V0
• Contacts : silver (A) Gold plated silver (AD) on request
• Bushing and actuator : see “Options” page CUT-OUT
• Panel cut-out : Ø 16,2 mm (.637)
• Min. pitch for matrix mounting : 24 mm x 24 mm (.944 x .944) ORDER FORMAT Flat or curved actuator - solder lug terminals Hex nut 19 (.748) across flats Ø12.00 (.472DIA) Ø18.00 (.708DIA) 3.40 (.133) 1.50 (.059) 9.00 (.354) 15.20 (.598) 1.40 (.055) 2.30 (.090) 3.00 (.118) 3.00 (.118) Ø16.00X1.00 SI (.629DIAX1.00 IS) Ø18.00 (.708DIA) Ø12.00 (.472DIA) EPOXY Flat actuator AV0611A2 OFF - ON Curved actuator AV1611A2 OFF - ON BASIC MODEL 2.80 (.047) 1.20 (.047) 2.40 (.094) 0.50 (.019) 8.00 (.314)EPOXY To order a product, select a basic model below and add the desired options. See “Options” page. Actuator

06 Flat

16 Curved

1 Off-On

1 Long

2 Solder

8 Quick-

14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page81

B2-82 APEM www.apem.com AV series Security pushbutton switches Ø 16 mm (.629) Options Flat or curved metal actuator CODE BUSHING ACTUATOR 00 (standard) Nickel plated brass Nickel plated brass

10 Nickel plated brass Stainless steel

40 Stainless steel Stainless steel

K Front panel sealing (IP65) BUSHING/ACTUATOR MATERIALS After selecting basic model number, fill in last 2 boxes with desired options. BASIC MODEL Bushing/act. material Sealing 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page82

APEM www.apem.com B2-83 AV series Security pushbutton switches Ø 19 mm (.748) Momentary (NO) NO (function 3) Flat actuator - short case - 48VDC - AV09100 Hex nut 22 (.866) across flats (.748DIAx1.00 IS) (.531) ø22.00 (.590DIA) (.866DIA) ø15.00 (.078) 2.00 (.216) 5.5013.50 (.196) 5.00 (.118) 3.00 ø19.00x1.00 SI EPOXY 2.80x0.5 (.110x.019) 1.20 (.047) 2.80 (.110) 7.30 (.287) SPECIFICATIONS

• Max. current/voltage rating with resistive load : - A contacts : 4A 12VDC, 500.000 cycles - C contacts : 2A 48 VDC, 10.000 cycles
• Approved ratings of models with long case and A contacts (AV..000) : UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 3 sec. max.
• Packaging unit : 40 pieces Screw terminals AV091003•9 Solder lug / quick-connect term. AV091003•2 MATERIALS
• Case : PBT
• Contacts : silver (A) or brass, silver plated (C)
• Bushing and actuator : see “Options” page CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) (AV9P & AV9B : 25 mm x 25 mm) ORDER FORMAT BASIC MODEL To order a product, select a basic model below and add the desired options. Screw terminals for wires 1,5 mm2 max. See “Options” page. Bushing/act. config.

09 Flat actuator

19 Curved actuator

9P Flat act., knurled nut 9B Curved act., knurled nut SERIES Case silver pl. Terminals Curved actuator - short case Screw terminals AV191003•9 Solder lug / quick-connect terminals AV191003•2 With knurled nut for matrix mounting 25 x 25 - AV9P and AV9B Flat actuator, screw terminals Curved actuator, screw terminals AV9P1003•9 AV9B1003•9 Flat actuator, solder lug term. Curved actuator, solder lug term. AV9P1003•2 AV9B1003•2 Wrench available under P/N U1929 Ø15.00 (.590DIA) Ø22.00 Ø15.00 (.866DIA) (.590DIA) (.177) 4.50 (.866DIA) Ø22.00 25.00 25.00 25.00 (.984)(.984) (.984) 4.50 (.177) (.078) (.590DIA) (.866DIA) 2.00 Ø15.00 Ø22.00 (.141) 3.60 Contacts : remplace • with A (silver) or C (silver plated brass). 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page83

B2-84 APEM www.apem.com AV series Security pushbutton switches Ø 19 mm (.748) Momentary (NO) Curved actuator - long case Screw terminals AV190003A9 With knurled nut for matrix mounting 25 x 25 - AV9P and AV9B Flat actuator, screw terminals Curved actuator, screw terminals AV9P0003A9 AV9B0003A9 Wrench available under P/N U1929. Ø15.00 (.590DIA) Ø22.00 Ø15.00 (.866DIA) (.590DIA) (.177) 4.50 (.866DIA) Ø22.00 25.00 25.00 25.00 (.984)(.984) (.984) 4.50 (.177) (.078) (.590DIA) (.866DIA) 2.00 Ø15.00 Ø22.00 (.141) 3.60 Flat actuator - long case - 4A 250VAC/8A 125VAC - UL/CSA - AV09000 (.413) 10.50 (.582) 14.80 (.196) 5.00 2.00 (.078) Ø19.00x1.00 SI3.00 Ø22.00 Ø15.00 (.866DIA) (.590DIA) (.748DIAx1.00 IS)(.118) Screw terminals AV090003A9 Hex nut 22 (.866) across flats Screw terminals for wires 1,5 mm2 max. To order switches marked UL-CSA, add “UU” at the end of model number. 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page84

APEM www.apem.com B2-85 AV series Security pushbutton switches Ø 19 mm (.748) Options Flat or curved metal actuator CODE BUSHING ACTUATOR 00 (standard) Nickel plated brass Nickel plated brass

12 Nickel plated brass Chrome plated brass

20 Chrome plated brass Chrome plated brass

30 Chrome plated brass Stainless steel

80 Varnished polished brass Varnished polished brass

Flat thermoplastic actuator CODE BUSHING ACTUATOR COLOUR 0• (standard) Nickel plated brass 2• Chrome plated brass 8• Varnished polished brass Replace • with one of the following codes. 1 : blue - 1/4 : dark blue - 2 : black - 3 : green 4 : grey - 5 : yellow - 6 : red - 7/1: white 9 : orange - By engraving on flat or curved brass actuator (stainless steel on request) - by hot stamping on flat thermoplastic actuator COLOUR OF MARKING CODE COLOUR Brass actuator 0 (standard) Same as finish

2 Black

Note : a finished product supplied in version “0” cannot be modified to version "2". Thermoplastic actuator

7 White

X Symbol * Y Symbol # A to N Letters A to N P to W Letters P to W

0 Letter O

Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces (0.059) 1.50 (0.314) 8.00 (0.590DIA) Ø15.00 MARKING Select an option from each of the two tables below. K Frontal panel sealing (IP65) SEALING ➀ internal gasket ➁ external gasket Blank No sealing BUSHING/ACTUATOR MATERIALS After selecting basic model number, fill in last 3 boxes with desired options. BASIC MODEL Bush./actuator material Marking Sealing 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page85

B2-86 APEM www.apem.com AV series Security pushbutton switches Ø 19 mm (.748) Momentary (NC/NO) Solder lug terminals - AV19..407 4 21 3 Ø19.00X1.00 SI (.748DIAX1.00 IS) 12.60 (.496) 3.60 (.141) 13.10 (.515) Ø22.00 (.866DIA) Ø15.00 (.590) 2.00 (.078) 3.60 (.141) 1.50 (.059) 0.50 (.019) 2.00 (.078) Ø15.00 (.590) Ø22.00 (.866DIA) SPECIFICATIONS

• Max. current/voltage rating with resistive load : 5A 250VAC - 5A 125VAC - 6.000 cycles 5A 15VDC - 3A 30VDC - 50.000 cycles
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between term. and frame
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 9 mm (.354) max.
• Operating temperature : -20°C to +85°C
• Low level or mechanical life : 1.000.000 cycles
• Front panel sealing : IP65 and IP69K
• Packaging unit : 20 pieces Combined NC/NO 4 2 1 3 ORDER FORMAT Series Bushing diameter Bush./act. config. Actuator style Bush./act. matl Contact/ terminals AV 19 P B See below L 40 7 MATERIALS
• Case : PA 6/6
• Contacts : silver
• Bushing : stainless steel (std)
• Actuator : stainless steel (std) CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) Hex nut 22 (.866) across flats Flat actuator AV19LP407 Curved actuator AV19LB407 BASIC MODEL All model numbers below are for switches with standard bushing/actuator material. ➞ O-ring CODE BUSHING ACTUATOR

00 Nickel plated brass Nickel plated brass

BUSHING/ACTUATOR MATERIALS For non-standard material, replace 40 with one of the following codes. 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page86

APEM www.apem.com B2-87 AV series Security pushbutton switches Ø 19 mm (.748) With illuminated ring - momentary (NC/NO) SPECIFICATIONS

• Travel : 2 mm ± 0,3 mm (.003)
• Max. current/voltage rating with resistive load : 1A 30VDC
• LED voltage : 12VDC, 24VDC or 48VDC (If not supplied by APEM, a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 10 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals 1.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 250.000 cycles at full load
• Operating force : 5N ± 2N
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Low level or mechanical life : 1.000.000 cycles
• Operating temperature : -20°C to +55°C
• Hand soldering : 350°C, 5 seconds max.
• Packaging unit : flying lead/cable models : 1 piece - other models : 40 pieces ** Resistor value = supply voltage - LED forward voltage LED forward current MATERIALS
• Case : polyamide, glass filled
• Contacts : silver
• Bushing : see next page
• Actuator : see next page
• Elastomeric membrane : silicone
• LED CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) NC/NO ORDER FORMAT Flat actuator - solder lug terminals Hex nut 22 (.866) across flats Illuminated (select LED colour above) * AV9•022 Non-illuminated AV90022 Bushing dia. 19 mmSERIES LED colour 0 : no LED - 1 : blue - V : green 5 : yellow - 6 : red - 7 : white - 9 : amber LED resistor

0 No resistor supplied

2 Silver

2 Solder /

To order a product, select a basic model below and add the desired LED colour and voltage. Then select the desired options on next page. Options : see next page. Flat actuator - flying lead terminals Hex nut 22 (.866) across flats Illuminated (select LED colour & resistor above) AV9••2F Non-illuminated AV9002F * No LED resistor supplied on this model. 3.00 (.118) 22.00 (.866) (.086) 2.20 (.456) 11.60 (.326) 8.30 Ø22.00 (.866DIA) (.110x.019) 2.80x0.50 NONC NO NC (.748DIAx1.00 IS) Ø19.00x1.00 SI (.476) 12.10 3.00 (.118)(.086) 2.20 (.456) 11.60 Ø22.00 (.866DIA) (.748DIAx1.00 IS) Ø19.00x1.00 SI Ø15.00 (.590DIA) (.472DIA) Ø12.0012.10 (.476) (7.874) 200 Wire colours : black: NC, orange: NO, red: LED anode (+), blue : LED cathode (-) 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page87

B2-88 APEM www.apem.com AV series Security pushbutton switches Ø 19 mm (.748) With illuminated ring - momentary (NC/NO) CODE BUSHING ACTUATOR

00 Brass, nickel plated Brass, nickel plated

40 Stainless steel 303 Stainless steel 303

4A Stainless steel 304 Stainless steel 304 4B Stainless steel 316 Stainless steel 316 Other : on request. K Front panel sealing (IP67) ➀ internal membrane ➁ external gasket BUSHING/PLUNGER MATERIALS CODE COLOUR CODE COLOUR

1 Blue 6 Red

2 Black * 7 Opal white (std)

3 Green 8 Translucent

4 Grey * 9 Orange

5 Yellow

• non-illuminated only RING COLOURS SEALING Blank No sealing After selecting basic model No., fill in last 5 boxes with desired options. BASIC MODEL Flying lead protection Flying lead/ cable length Ring colour Bushing / plunger mat. Sealing Flat actuator - cable terminals Hex nut 22 (.866) across flats Illuminated (select colour & resistor) AV9••2C Non-illuminated AV9002C

0 No protection and/or no flying leads

1 Heat-shrink sleeves

2 Tube + epoxy

000 No flying leads / no cable

020 Length 20 cm (standard)

3.00 (.118)(.086) 2.20 (.456) 11.60 Ø22.00 (.866DIA) (.748DIAx1.00 IS) Ø19.00x1.00 SI 12.10 (.476) (7.874) 200 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page88

APEM www.apem.com B2-89 AV series Security pushbutton switches Ø 19 mm (.748) Illuminated and non-illuminated - latching ORDER FORMAT See next page. Actuator type SERISE Bush./act. config. Illumin. 0 No L Illum. Function Contacts AV 1 LED colour

0 No LED

1 Blue

3 Green

6 Red

• Max. current/voltage rating with resistive load : 2A 48 VDC
• LED voltage and consumption : blue 3,5V 10mA, green : 2V 10mA yellow & red : 2V 20mA (a resistor must be series-connected by the user)**
• Initial contact resistance : 50 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 1 000 Vrms 50 Hz min. between terminals 500 Vrms 50 Hz min. between terminals and frame
• Electrical life : 500.000 cycles at 2A 48VDC
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 9 mm (.354) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 4 seconds max.
• Packaging unit : 20 pieces ** Resistor value = supply voltage - LED forward voltage LED forward current MATERIALS
• Case : PA6T UL94-V0
• Contacts : silver
• Bushing and actuator : see next page
• LED CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181 x 1.181)Non-illuminated - solder lug terminals Hex nut 22 (.866) across flats (.118) 3.00(.748DIAx1.00 IS) Ø19.00x1.00 SI (.141) 3.60 Ø15.00 Ø22.00 2.00 13.50 10.70 2.80 2.30 1.40 0.50 (.019) (.055) (.590DIA) (.866DIA) (.090) (.110)(.421)(.531) (.078) NC NC NO Flat actuator * AV09100EA2 ON - ON Curved actuator AV19100EA2 ON - ON To order a product, select a basic model below and add the desired options selected on next page. Illuminated - solder lug terminals Hex nut 22 (.866) across flats Ø19.00x1.00 SI (.748DIAx1.00 IS) 3.00 (.118) Ø3.20 (.125DIA) (.531) 13.50 (.421) 10.70 NO NC NC (.078) (.110) (.090) (.866DIA) (.590DIA) (.055) (.019) 0.50 1.40 2.30 2.80 2.00 Ø22.00 Ø15.00 Flat actuator AV091L•EA2 ON - ON Replace • with desired LED colour. * Also available with prominent actuator in the non-latched position Standard actuator position : the actuator is flush in the non-latched position and recessed in the latched position. 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page89

B2-90 APEM www.apem.com K Frontal panel sealing (IP65) Quick-connect terminals Replace 2 with 8 at the end of the model numbers shown on previous page. 8.00 (.314) (.047) 1.20 (.094) (.110) 2.40 2.80 AV series Security pushbutton switches Ø 19 mm (.748) Latching - Options Straight PC terminals Replace 2 with 4 at the end of the model numbers shown on previous page. (.133) 3.40 1.10 (.043) CODE BUSHING ATUATOR 00 (std) Nickel plated brass Nickel plated brass

50 Stainless steel Nickel plated brass

BUSHING/ACTUATOR MATERIALS SEALING ➀ elastomeric membrane ➁ external gasket Blank No sealing After selecting basic model number, fill in last 2 boxes with desired options. BASIC MODEL Bushing/ act. material Sealing 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page90

APEM www.apem.com B2-91 AV series Snap-action security pushbutton switches Ø 19 mm (.748) Illuminated and non-illuminated - momentary (NO) Flat actuator - illuminated Solder lug terminals AV09C7L3D2 Screw terminals AV09C7L3D9 NO (function 3) SPECIFICATIONS

• Travel : 0,7 mm (.027) ±0,1 mm (.003)
• Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA Other colours : 2V (3V max.) 10mA A resistor must be series-connected by the user **
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N ±- 2 N
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Hand soldering : 270°C, 3 seconds max.
• Packaging unit : 40 pieces ** Resistor value = supply voltage - LED forward voltage LED forward current Flat actuator - non-illuminated Hex nut 22 (.866) across flats Solder lug terminals AV09C703D2 Screw terminals AV09C703D9 Also available with curved actuator : AV19C703D2 or AV19C703D9 MATERIALS
• Case : PBT UL94-V0
• Terminals : brass, gold plated
• Contacts : gold plated dome
• Bushing and actuator : see next page
• LED CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) (.074) 1.90 (.153) 3.90 (.043) 1.10 Ø19.00x1.00 SI 3.00 Ø22.00 Ø15.00 2.00 13.50 (.866DIA) (.590DIA) (.748DIAx1.00 IS) (.118)(.078) (.531) (.163) 4.15 (.590DIA) (.866DIA) Ø15.00 Ø22.00 EPOXY (.519) 13.2013.50 (.531) (.078) 2.00 (.531) (.078) (.118) (.748DIAx1.00 IS) (.590DIA) (.866DIA) 13.50 2.00 Ø15.00 Ø22.00 3.00 Ø19.00x1.00 SI 1.10 (.043) 3.90 (.153) 4.15 (.163) 1.90 (.074) (.393DIA) Ø10.00 EPOXY (.590DIA) (.866DIA) Ø15.00 Ø22.00 (.078) 2.00 (.519) 13.2013.50 (.531) ORDER FORMAT To order a product, select a basic model below and add the desired options selected on next page. Hex nut 22 (.866) across flats + - See next page Actuator type

SERIES Case Illumin. 0 No L Illum. Function Terminals 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page91

B2-92 APEM www.apem.com AV series Snap-action security pushbutton switches Ø 19 mm (.748) Options Non-illuminated models CODE BUSHING ACTUATOR 00 (std) Nickel plated brass Nickel plated brass 00 (std) Nickel plated brass Nickel plated brass Varnished polished brass Varnished polished brass Blank No LED 1: Blue - 3 : Green - 5 : Yellow - 6 : Red - 7 : White - 9 : Amber - 2 : Red/green K Front panel sealing (IP65) ➀ internal gasket ➁ external gasket BUSHING/ACTUATOR MATERIALS LED COLOURS For flat or curved actuator. - by engraving on non-illuminated brass actuator (stainless steel on request). - by hot stamping on thermoplastic insert (illuminated actuators) COLOUR OF MARKING CODE COLOUR Non-illuminated actuators 0 (standard) Same as finish Note : a finished product supplied in version “0” cannot be modified to version "2". Illuminated actuators

2 Black (on white)

X Symbol * Y Symbol # A to N Letters A to N P to W Letters P to W Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces (0.059) 1.50 (0.314) 8.00 Ø10.00 (0.393DIA) (0.039) 1.00 MARKING Select an option from each of the two tables below. SEALING Blank No sealing After selecting basic model no., fill in last 4 boxes with desired options. BASIC MODEL Bushing/act. material LED colour Marking Sealing 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page92

APEM www.apem.com B2-93 AV series Snap-action security pushbuttons Ø 19 mm (.748) with overmolded actuator Illuminated and non-illuminated - momentary (NO) SPECIFICATIONS

• Travel : 0,7 mm (.027) ± 0,1 mm (.003)
• Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA Other colours : 2V (3V max.) 10mA (a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N ±2N
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Hand soldering : 270°C, 3 sec. max.
• Packaging unit : 16 pieces ** Resistor value = supply voltage - LED forward voltage LED forward current MATERIALS
• Case : PBT UL94-V0
• Terminals : brass, gold plated
• Contacts : gold plated dome
• Bushing : see next page
• Actuator : stainless steel, with thermoplastic overmolding
• LED CUT-OUT
• Panel cut-out : Ø 19,2 mm (.755)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) NO (function 3) ORDER FORMAT Flat actuator - solder lug terminals Hex nut 22 (.866) across flats (.385) (.078) (.118) (.590DIA) (.866DIA) 9.80 2.00 Ø15.00 Ø22.00 3.00 1.10 (.043) 4.30 (.169) 4.15 (.163) 1.90 (.074) (.393DIA) Ø10.00 EPOXY (.590DIA) (.866DIA) Ø15.00 Ø22.00 (.078) 2.00 Also available with bushing Ø 22 (.866) : on request. Illuminated AV9SLD2 Non-illuminated AV9S0D2 Flat actuator - screw terminals Hex nut 22 (.866) across flats (.385) (.078) (.118) (.590DIA) (.866DIA) 9.80 2.00 Ø15.00 Ø22.00 3.00 4.30 (.169) (.393DIA) Ø10.00 (.590DIA) (.866DIA) Ø15.00 Ø22.00 (.078) 2.00 (.354) 9.00 Also available with bushing Ø 22 (.866) : on request. Illuminated AV9SLD9 Non-illuminated AV9S0D9 See next page Bush./act. configuration SERIES Illumination S0 No SL Illum. Contacts Terminals

To order a product, select a basic model below and add the desired options selected on next page. 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page93

B2-94 APEM www.apem.com AV series Snap-action security pushbuttons Ø 19 mm (.748) with overmolded actuator Options CODE MATERIAL 0 (std) Nickel plated brass

2 Chrome plated brass

4 Stainless steel

5 Gold plated brass

6 Chrome plated brass, satin

7 Chrome pl. brass, matt black

8 Varnished polished brass

9 Polished brass

K Front panel sealing (IP67) K Front panel sealing (IP69K) ➀ internal membrane ➁ external gasket BUSHING MATERIALS CODE COLOUR CODE COLOUR

2 Black * 7 White

• non-illuminated only OVERMOLDING COLOURS CODE COLOUR Blank No LED

2 Red/green

3 Green V Green, high intensity

9 Amber

The ring and symbols are obtained by photochemical engraving of a stainless steel insert. The insert is then overmolded in the desired colour. The following actuator styles are available. For other types, consult factory. ACTUATOR STYLES SEALING Blank No sealing After selecting basic model no., fill in last 5 boxes with desired options. CODE 001 002 003 004 005

DESCRIPTION

DESCRIPTION Validation Closing Standby Cancel Power SYMBOL BASIC MODEL Bushing material Over- molding LED colour Actuator type Sealing ** To order a green LED for actuator style 002, always use code V. Other actuator styles can be ordered with LED code 3 or V. 011 Recommended panel mounting for IP69K 14-Serie AV-1-A_18-Serie AV-A 21/11/12 15:39 Page94

APEM www.apem.com B2-95 AV series Snap-action security pushbuttons Ø 22 mm (.866) with overmolded actuator Illuminated and non-illuminated - momentary (NO) SPECIFICATIONS

• Travel : 0,7 mm (.027) ± 0,1 mm (.003)
• Max. current/voltage rating with resistive load : 50mA 24VDC
• LED voltage and consumption : 2-colour LED : 2V (3V max.) 20mA Other colours : 2V (3V max.) 10mA (a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at full load
• Operating force : 7 N ±2N
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -30°C to +70°C
• Hand soldering : 270°C, 3 sec. max.
• Packaging unit : 16 pieces ** Resistor value = supply voltage - LED forward voltage LED forward current MATERIALS
• Case : PBT UL94-V0
• Terminals : brass, gold plated
• Contacts : gold plated dome
• Bushing : see next page
• Actuator : stainless steel, with thermoplastic overmolding
• LED NO (function 3) ORDER FORMAT Flat actuator - solder lug terminals Hex nut 25 (.984) across flats Illuminated AV3SLD2 Non-illuminated AV3S0D2 Flat actuator - screw terminals Hex nut 25 (.984) across flats Illuminated AV3SLD9 Non-illuminated AV3S0D9 See next page Bush./act. configuration SERIES Illumination S0 No SL Illum. Contacts Terminals

To order a product, select a basic model below and add the desired options selected on next page. CUT-OUT

• Panel cut-out : Ø 22,2 mm (.874)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) (.366) (.078) (.157) (.590DIA) (.984DIA) 9.30 2.00 Ø15.00 Ø25.00 4.00 4.80 (.188) (.393DIA) Ø10.00 (.078) 2.00 Ø25.00 Ø15.00 (.984DIA) (.590DIA) (.043) 1.90 (.074) 4.15 (.163) 1.10 EPOXY (.366) (.078) (.157) (.590DIA) (.984DIA) 9.30 2.00 Ø15.00 Ø25.00 4.00 4.80 (.188) (.393DIA) Ø10.00 (.078) 2.00 (.354) 9.00 Ø25.00 Ø15.00 (.984DIA) (.590DIA) 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page95

B2-96 APEM www.apem.com AV series Snap-action security pushbuttons Ø 22 mm (.866) with overmolded actuator Options CODE MATERIAL 0 (std) Nickel plated brass 7 Chrome pl. brass, matt black K Front panel sealing (IP67) K Front panel sealing (IP69K) ➀ internal membrane ➁ external gasket BUSHING MATERIALS CODE COLOUR CODE COLOUR

• non-illuminated only OVERMOLDING COLOURS CODE COLOUR Blank No LED

3 Green V Green, high intensity Blank No sealing Recommended panel mounting for IP69K After selecting basic model no., fill in last 5 boxes with desired options. BASIC MODEL Bushing material Over- molding LED colour Actuator type ** To order a green LED for actuator style 002, always use code V. Other actuator styles can be ordered with LED code 3 or V. Sealing The ring and symbols are obtained by photochemical engraving of a stainless steel insert. The insert is then overmolded in the desired colour. The following actuator styles are available. For other types, consult factory. ACTUATOR STYLES CODE 001 002 003 004 005 DESCRIPTION Validation Closing Standby Cancel Power SYMBOL 011 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page96

APEM www.apem.com B2-97 AV series Security pushbutton switches Ø 22 mm (.866) Momentary (NO) Flat actuator - short case - 48VDC - AV03100 Hex nut 25 (.984) across flats ø22.00x1.00 SI (.866DIAx1.00 IS) 5.00 (.196) 6.30 (.248)(.500) 12.70 3.00 (.118)(.078) 2.00 ø15.00 (.59DIA) ø25.00 (.984DIA) EPOXY2.80x0.5 (.110x.019) (.110) 2.80 (.287) 7.30 (.047) 1.20 Screw terminals AV031003•9 Solder lug / quick-connect term. AV031003•2 NO (function 3) SPECIFICATIONS

• Max. current/voltage rating with resistive load : - A contacts : 4A 12VDC, 500.000 cycles - C contacts : 2A 48 VDC, 10.000 cycles
• Approved ratings of models with long case and A contacts (AV..000) : UL-CSA : 4A 250VAC - 8A 125VAC - 6.000 cycles
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame 2.000 Vrms 50 Hz min. between terminals
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 11 mm (.433) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 3 sec. max.
• Packaging unit : 20 pieces MATERIALS
• Case : PBT
• Contacts : silver (A) or brass, silver plated (C)
• Bushing and actuator : see “Options” page CUT-OUTS
• Panel cut-out : Ø 22,2 mm (.874)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) BASIC MODEL To order a product, select a basic model below or on next page and add the desired options. Screw terminals for wires 1,5 mm2 max. ORDER FORMAT See “Options” page. Bushing/act. configuration

03 Flat actuator

02 Curved actuator

M2 Curved act.+flatted bush. M3 Flat act.+flatted bush. SERIES Case C Brass, silver pl. Terminals Curved actuator - short case Screw terminals AV021003•9 Solder lug / quick-connect terminals AV021003•2 3.60 (.141) (.078) 2.00 Ø15.00 (.590DIA) Ø25.00 (.984DIA) Flatted bushing - short case - AVM3 and AVM2 Flat actuator, screw terminals AVM31003•9 Curved actuator, screw terminals AVM21003•9 (.984DIA) Ø25.00 (.590DIA) Ø15.00 (.393 10.00 Ø22.20 (.874DIA) Contacts : remplace • with A (silver) or C (silver plated brass). 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page97

B2-98 APEM www.apem.com AV series Security pushbutton switches Ø 22 mm (.866) Momentary (NO) - momentary (NC) - alternate action Curved actuator - long case Screw terminals AV020003A9 3.60 (.141) (.078) 2.00 Ø15.00 (.590DIA) Ø25.00 (.984DIA) Flatted bushing - long case - AVM3 and AVM2 Flat actuator, screw terminals AVM30003•9 Curved actuator, screw terminals AVM20003•9 (.984DIA) Ø25.00 (.590DIA) Ø15.00 (.393 10.00 Ø22.20 (.874DIA) Bushing Ø 22 (.866) - AV..1200

• Single pole, screw terminals, without marking
• Silver plated copper contacts (C)
• Max. current/voltage rating with resistive load : 2A 250VAC - 3A 125VAC - 2,5A 24VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. betw. term. and frame 2.000 Vrms. 50 Hz min. between terminals
• Electrical life : 100.000 cycles at 0,3A 24VAC or DC 10.000 cycles at full load
• Packaging unit : 20 pieces Flat actuator Curved actuator AV031202C900 AV021202C900 (.984DIA) Ø25.00 Ø15.00 (.59DIA) 7.00 (.275) 15.40 (.606)(.551)(.141) 14.003.60 (.59DIA) Ø15.00 2.00 (.078) (.118) 3.00 Ø22.00x1.00 SI (.866DIAx1.00 IS) (.118DIAx.0.50) Ø3.00x0.50 13.20 (.519) Hex nut 25 (.984) across flats Flat actuator - long case - 4A 250VAC/8A 125VAC - UL/CSA - AV03000 Hex nut 25 (.984) across flats Ø22.00x1.00 SI (.866DIAx1.00 IS) 5.00 (.196) 10.00 (.248)(.590) 15.00 3.00 (.118)(.078) 2.00 Ø15.00 (.59DIA) Ø25.00 (.984DIA) Screw terminals AV030003A9 Screw terminals for wires 1,5 mm2 max. To order switches marked UL-CSA, add “UU” at the end of model number. MOMENTARY NORMALLY CLOSED MODEL(NC) Bushing Ø 22 (.866) - alternate action - AV..4700
• Double pole, solder lug/quick-connect term., curved actuator
• Silver contacts
• Max. current/voltage rating with resistive load : 3(1,5)A 250VAC - 6A 125VAC - 3A 24VAC or DC
• Dielectric strength : 3.000 Vrms min. between terminals and frame
• Electrical life : 10.000 cycles at full load 50.000 cycles at 1A 24VAC or DC
• Mechanical life : 100.000 cycles
• Packaging unit : 10 pieces AV044746A200 ON - ON Hex nut 25 (.984) across flats Ø25.00 (.984DIA) (.551)(.141) 14.003.60 (.59DIA) Ø15.00 1.60 (.063) (.118) 3.00 Ø22.00x1.00 SI (.866DIAx1.00 IS) (.811) 20.60 7.20 (.283) 5.80 (.228) 8.40 (.330) 0.50x2.80 (.019x.110) Further specifications : see previous page. Bushing/actuator materials, marking and sealing : see ”options” on next page. 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page98

APEM www.apem.com B2-99 AV series Security pushbutton switches Ø 22 mm (.866) Options Flat or curved metal actuator CODE BUSHING ACTUATOR 00 (standard) Nickel plated brass Nickel plated brass 80 ** Varnished polished brass Varnished polished brass Flat thermoplastic actuator CODE BUSHING ACTUATOR COLOUR 0• (standard) Nickel plated brass 2• Chrome plated brass 8• Varnished polished brass BUSHING/ACTUATOR MATERIALS Replace • with one of the following codes. 1 : blue - 1/4 : dark blue - 2 : black - 3 : green 4 : grey - 5 : yellow - 6 : red - 7/1: white 9 : orange - By engraving on flat or curved brass actuator (stainless steel on request) - by hot stamping on flat thermoplastic actuator COLOUR OF MARKING CODE COLOUR Brass actuator 0 (standard) Same as finish Note : a finished product supplied in version “0” cannot be modified to version "2". Thermoplastic actuator X Symbol * Y Symbol # A to N Letters A to N P to W Letters P to W Letter O : same code and same design as number 0. For special symbols, consult factory. Minimum order : 500 pieces (0.059) 1.50 (0.314) 8.00 (0.590DIA) Ø15.00 MARKING Select an option from each of the two tables below. After selecting basic model number, fill in last 3 boxes with desired options. SEALING Blank No sealing BASIC MODEL Bush./actuator material Marking Sealing K Frontal panel sealing (IP65) ➀ internal gasket ➁ external gasket 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page99

B2-100 APEM www.apem.com AV series Security pushbutton switches Ø 22 mm (.866) With illuminated ring - momentary (NC/NO) SPECIFICATIONS

• Travel : 2 mm ± 0,3 mm (.003)
• Max. current/voltage rating with resistive load : 1A 30VDC
• LED voltage : 12VDC, 24VDC or 48VDC (If not supplied by APEM, a resistor must be series-connected by the user)**
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 10 MΩ min. at 500VDC
• Dielectric strength : 500 Vrms 50 Hz min. between terminals 1.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 250.000 cycles at full load
• Operating force : 5N ± 2N
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Low level or mechanical life : 1.000.000 cycles
• Operating temperature : -20°C to +55°C
• Hand soldering : 350°C, 5 seconds max.
• Packaging unit : flying lead/cable models : 1 piece - other models : 40 pieces ** Resistor value = supply voltage - LED forward voltage LED forward current MATERIALS
• Case : polyamide, glass filled
• Contacts : silver
• Bushing : see next page
• Actuator : see next page
• Elastomeric membrane : silicone
• LED CUT-OUT
• Panel cut-out : Ø 22,2 mm (.874)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) NC/NO ORDER FORMAT Flat actuator - solder lug terminals Hex nut 25 (.984) across flats Illuminated (select LED colour above) * AV3•022 Non-illuminated AV30022 Bushing dia. 22 mmSERIES LED resistor

To order a product, select a basic model below and add the desired LED colour and voltage. Then select the desired options on next page. Options : see next page. Flat actuator - flying lead terminals Hex nut 25 (.984) across flats Illuminated (select LED colour & resistor above) AV3••2F Non-illuminated AV3002F * No LED resistor supplied on this model. LED colour 0 : no LED - 1 : blue - V : green 5 : yellow - 6 : red - 7 : white - 9 : amber 25.00 (.984) (.086) 2.20 (.456) 11.60 (.326) 8.30 Ø25.00 (.984DIA) (.110x.019) 2.80x0.50 NONC NO NC (.866DIAx1.00 IS) Ø22.00x1.00 SI (.476) 12.10 4.00 (.157) (.866DIAx1.00 IS) Ø22.00x1.00 SI Ø15.00 (.590DIA) (.472DIA) Ø12.00 12.10 (.476) (7.874) 200 (.157) 4.00 (.984DIA) Ø25.00 11.60 (.456) 2.20 (.086) Wire colours : black: NC, orange: NO, red: LED anode (+), blue : LED cathode (-) 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page100

APEM www.apem.com B2-101 AV series Security pushbutton switches Ø 22 mm (.866) With illuminated ring - momentary changeover (NC/NO) CODE BUSHING ACTUATOR 4A Stainless steel 304 Stainless steel 304 4B Stainless steel 316 Stainless steel 316 Other : on request. K Front panel sealing (IP67) ➀ internal membrane ➁ external gasket BUSHING/PLUNGER MATERIALS CODE COLOUR CODE COLOUR

• non-illuminated only RING COLOURS SEALING Blank No sealing After selecting basic model No., fill in last 5 boxes with desired options. BASIC MODEL Flying lead protection Flying lead/ cable length Ring colour Bushing / plunger mat. Flat actuator - cable terminals Hex nut 25 (.984) across flats Illuminated (select colour & resistor) AV3••2C Non-illuminated AV3002C

020 Length 20 cm (7.874) - standard XXX Length in centimeters WIRE/CABLE LENGTH Sealing (7.874) 200 Ø22.00x1.00 SI (.866DIAx1.00 IS) 12.10 (.476) (.157) 4.00 (.984DIA) Ø25.00 11.60 (.456) 2.20 (.086) 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page101

B2-102 APEM www.apem.com AV series Security pushbutton switches Ø 22 mm (.866) Illuminated and non-illuminated - latching ORDER FORMAT See next page. Actuator type

03 Flat

02 Curved

SERIES Bush./act. config. Illumin. 0 No L Illum. Function Contacts AV 1 LED colour

• Max. current/voltage rating with resistive load : 2A 48 VDC
• LED voltage and consumption : blue 3,5V 10mA, green : 2V 10mA yellow & red : 2V 20mA (a resistor must be series-connected by the user)**
• Initial contact resistance : 50 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 1 000 Vrms 50 Hz min. between terminals 500 Vrms 50 Hz min. between terminals and frame
• Electrical life : 500.000 cycles at 2A 48VDC
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 9 mm (.354) max.
• Operating temperature : -30°C to +70°C
• Low level or mechanical life : 1.000.000 cycles
• Hand soldering : 300°C, 4 seconds max.
• Packaging unit : 20 pieces ** Resistor value = supply voltage - LED forward voltage LED forward current MATERIALS
• Case : PA6T UL94-V0
• Contacts : silver
• Actuator and bushing : see next page
• LED CUT-OUT
• Panel cut-out : Ø 22,2 mm (.874)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) Non-illuminated - solder lug terminals Hex nut 25 (.984) across flats Ø22.00x1.00 SI (.866DIAx1.00 IS) 3.00 (.118) Ø25.00 (.984DIA) 3.80 (.149) NO NC NC (.078) (.090) (.590DIA) (.055) (.019) 0.50 1.40 2.30 2.8011.5012.70 2.00Ø15.00 Flat actuator * AV03100EA2 ON - ON Curved actuator AV02100EA2 ON - ON To order a product, select a basic model below and add the desired options selected on next page. Illuminated - solder lug terminals Hex nut 25 (.984) across flats (.118) 3.00(.866DIAx1.00 IS) Ø22.00x1.00 SI Ø3.20 (.125DIA) Ø15.00 Ø25.00 2.00 12.70 11.50 2.80 2.30 1.40 0.50 (.019) (.055) (.590DIA) (.984DIA) (.090) (.110)(.045)(.500) (.078) NC NC NO Flat actuator AV031L•EA2 ON - ON Replace • with desired LED colour. * Also available with prominent actuator in the non-latched position Standard actuator position : the actuator is flush in the non-latched position and recessed in the latched position. 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page102

APEM www.apem.com B2-103 AV series Security pushbutton switches Ø 22 mm (.866) Illuminated and non-illuminated - latching K Frontal panel sealing (IP65) Quick-connect terminals Replace 2 with 8 at the end of the model numbers shown on previous page. 8.00 (.314) (.047) 1.20 (.094) (.110) 2.40 2.80 Straight PC terminals Replace 2 with 4 at the end of the model numbers shown on previous page. (.133) 3.40 1.10 (.043) CODE BUSHING ACTUATOR 00 (std) Nickel plated brass Nickel plated brass BUSHING/ACTUATOR MATERIALS SEALING ➀ elastomeric membrane ➁ external gasket Blank No sealing After selecting basic model number, fill in last 2 boxes with desired options. BASIC MODEL Bushing/ act. material Sealing 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page103

B2-104 APEM www.apem.com AV series Security pushbutton switches Ø 22 mm (.866) or 24 mm (.944) with large actuator Momentary (combined NC+NO) Combined NC+NO Recessed actuator - AV22LC Quick-connect terminals AV22LC••4 Solder lug terminals AV22LC••2 Curved actuator - AV22LB Quick-connect terminals AV22LB••4 Solder lug terminals AV22LB••2 SPECIFICATIONS

• Max. current/voltage rating with resistive load : 5A 250VAC
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at 1A 250VAC 100.000 cycles at full load
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Low level or mechanical life : 3.000.000 cycles
• Front panel sealing : IP65
• Hand soldering : 300°C, 5 sec. max.
• Packaging unit : 20 pieces (except black chrome plated : 16 pieces) MATERIALS
• Case : polyester, glass filled
• Contacts : silver/nickel alloy
• Bushing and actuator : see next page. CUT-OUT
• Panel cut-out : Ø 22,2 mm
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) or 33 mm x 33 mm (1.299x1.299) Flat actuator - AV22LP Hex nut 25 (.984) across flats 1.30 (.051) Ø20.00 (.787DIA) (.141) 3.604.00 (.157) (.019) 0.50 Ø22.00X1.00 SI (.866DIAX1.00 IS) Ø26.00 (1.023DIA) 12.80 (.503) 12.50 (.492)(.118) 3.00 (.250) 2.40 (.279) (.110X.019) 2.80X0.50 7.10 Quick-connect terminals AV22LP••4 Solder lug terminals AV22LP••2 BASIC MODEL To order a product, select a basic model below or on next page and add the desired bushing/actuator materials. ➞ O-ring ORDER FORMAT Bush./actuator material See next page Bushing diameter 22 22 mm 24 24 mm SERIES Bush./act. config. Act. style P Flat B Curved C Recessed AV L Terminals

4 Quick-

2 Solder lug

14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page104

APEM www.apem.com B2-105 AV series Security pushbutton switches Ø 22 mm (.866) or 24 mm (.944) with large actuator Momentary (combined NC+NO) Curved actuator - AV24LB Quick-connect terminals AV24LB••4 Solder lug terminals AV24LB••2 Recessed actuator - AV24LC Quick-connect terminals AV24LC••4 Solder lug terminals AV24LC••2 Flat actuator - low profile - AV24LP Hex nut 27 (1.062) across flats0.50 (.944DIAX1.00 IS) Ø24.00X1.00 SI (1.181DIA) Ø30.00 Ø20.00 (.787DIA) 4.00 (.157) 13.00 (.511) 1.30 (.051) 14.20 (.559) (.019) (.141) 3.60 7.10 2.80X0.50 (.110X.019) (.279) 2.40 (.250) (.051) 1.30 Quick-connect terminals AV24LP••4 Solder lug terminals AV24LP••2 BASIC MODEL Models with non-anodized actuator CODE BUSHING ACTUATOR 40 (standard) Stainless steel Stainless steel Models with anodized actuator CODE BUSHING ACTUATOR COLOUR 1• Black chrome plated brass 2• Chrome plated brass 4• Stainless steel BUSHING/ACTUATOR MATERIALS ➞ O-ring Replace • with one of the following codes : 1 : blue - 2 : black - 3 : pale green - 3F : dark green - 4 : natural - 5 : gold yellow 6 : red - 6B : maroon 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page105

B2-106 APEM www.apem.com AV series Mushroom head security pushbutton switches Ø 22 mm (.866) Momentary (combined NC+NO) Combined NC+NO SPECIFICATIONS

• Max. current/voltage rating with resistive load : 5A 250VAC
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 1.000.000 cycles at 1A 250VAC 50.000 cycles at full load
• Torque : 5 Nm min.- 14 Nm max. applied to nut
• Panel thickness : 1 (.039) to 6 mm (.236) max.
• Operating temperature : -20°C to +55°C
• Low level or mechanical life : 1.000.000 cycles
• Front panel sealing : IP65
• Hand soldering : 300°C, 5 sec. max.
• Packaging unit : 16 pieces MATERIALS
• Case : polyester, glass filled
• Contacts : silver/nickel alloy
• Bushing : brass, nickel plated Actuator : aluminium, anodized CUT-OUT
• Panel cut-out : Ø 22,2 mm (.874)
• Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) Mushroom head actuator - AV22PNA Hex nut 25 (.984) across flats (.019) (.141) 3.60 0.50 7.10 2.80X0.50 (.110X.019) (.279) 2.40 (.250) (.051) 1.30 Ø22.00X1.00 SI (.866DIAX1.00 IS) 12.80 (.503) 8.60 (.338)(.425) 10.80 4.00 (.157) (1.181DIA) Ø30.00 Quick-connect terminals AV22PNA•4 Solder lug terminals AV22PNA•2 BASIC MODEL 1 : blue - 2 : black - 3 : pale green - 3F : dark green - 4 : natural - 5 : gold yellow - 6 : red - 6B : maroon ACTUATOR ANODIZATION COLOURS Bushing diameter ORDER FORMAT SERIES Bush./act. config. AV PNA22 Actuator colour See below Terminals

To order a product, select a basic model below and add the desired actuator colour. ➞ O-ring 14bis-Serie AV-2-A_18-Serie AV-A 21/11/12 15:37 Page106