ATA6660 Datasheet PDF & Specifications

Manufacturer specification

1 manufacturers / 5 documents

Compare all 1 manufacturer specifications

Manufacturer	Series	Package	Documents	Available	Select specification
ATMEL Corporation	-	-	5	PDF HTML	Viewing

Online Datasheet

Read the ATMEL Corporation document online.

ATA6660_06 ATMEL

Document overview

Manufacturer or author: Provided By digicamel.com
PDF pages: 12

Technical content

Features

Usable for Automotive 12V/24V and Industrial Applications Maximum High-speed Data Transmissions up to 1 MBaud Fully Compatible with ISO 11898 Controlled Slew Rate Standby Mode TXD Input Compatible to 3.3V Short-circuit Protection Overtemperature Protection High Voltage Bus Lines Protection, –40V to +40V High Speed Differential Receiver Stage with a Wide Common Mode Range, –10V to +10V, for High Electromagnetic Immunity (EMI) Fully Controlled Bus Lines, CANH and CANL to Minimize Electromagnetic Emissions (EME) High ESD Protection at CANH, CANL HBM 8 kV, MM 300V 1. Description The ATA6660 is a monolithic circuit based on the Atmel’s Smart Power BCD60-III technology. It is especially designed for high speed CAN-Controller (CAN-C) differen- tial mode data transmission between CAN-Controllers and the physical differential bus lines. Figure 1-1. Block Diagram

4 RXD

5 VREF

7 CANH

6 CANL

2 GND

3 VCC

1 TXD TXD input stage

0.5*VCC Receiver High-speed Can Transceiver ATA6660 4582D–BCD–06/06

4582D–BCD–06/06 ATA6660 2. Pin Configuration Figure 2-1. Pinning SO8 TXD GND VCC RXD RS CANH CANL VREF Table 2-1. Pin Description Pin Symbol Function

1 TXD Transmit data input

2 GND Ground

3 VCC Supply voltage

4 RXD Receive data output

5 VREF Reference voltage output

6 CANL Low level CAN voltage input/output

7 CANH High level CAN voltage input/output

8 RS Switch standby mode/normal mode

4582D–BCD–06/06 ATA6660 3. Functional Description The ATA6660 is a monolithic circuit based on Atmel’s Smart Power BCD60-III technology. It is especially designed for high-speed differential mode data transmission in harsh environments like automotive and industrial applications. Baudrate can be adjusted up to 1 Mbaud. The ATA6660 is fully compatible to the ISO11898, the developed standard for high speed CAN-C (Controller Area Network) communication.

3.1 Voltage Protection and ESD

High voltage protection circuitry on both line pins, CANH (pin 7) and CANL (pin 6), allow bus line voltages in the range of –40V to +40V. ESD protection circuitry on line pins allow HBM = 8 kV, MM = 300V. The implemented high voltage protection on bus line output/input pins (7/6) makes the ATA6660 suitable for 12V automotive applications as well as 24V automotive applications.

3.2 Slope Control

A fixed slope is adjusted to prevent unsymmetrical transient s on bus lines causing EMC prob- lems. Controlled bus lines, both CANH and CANL signal, will reduce radio frequency interference to a minimum. In well designed bus configurations the filter design costs can be reduced dramatically.

3.3 Overcurrent Protection

In the case of a line shorts, like CANH to GND, CANL to VCC, integrated short current limitation allows a maximum current of I CANH_SC or ICANL_SC. If junction temperature rises above 165°C an internal overtemperature protection circuitry shuts down both output stages, the receiver will stay activated.

3.4 Standby Mode

The ATA6660 can be switched to standby mode by forcing the voltage VRS > 0.87 × VCC. In standby mode the supply current will reduce dramatically, supply current during standby mode is typical 600 µA (IVCC_stby). Transmitting data function will not be supported, but the opportunity will remain to receive data. A high-speed comparator is listening for activities on the bus. A domi- nant bus signal will force the output RXD to a low level in typical tdRXDL = 400 ns. If the RS pin is not connected, causing through a broken connection to the controller, the ATA6660 will switch to standby mode automatically.

3.5 High-speed Receiver

In normal mode a fast receiver circuitry combined with a resistor network is able to detect differ- ential bus line voltages Vrec_th > 0.9V as dominant bit, differential bus line voltages V rec_th <0 . 5 V as recessive bit. The wide receiver common mode range, –10V to +10V, combined with a symmetrical differential receiver stage offers high immunity against elec tromagnetic interference. A typical hysteresis of 70 mV is implemented. Dominant differential bus voltages forces RXD output (pin 4) to low level, recessive differential bus voltages to high level.

4582D–BCD–06/06 ATA6660

3.6 TXD Input

The input stage pin 1 (TXD) is compatible for 3.3V output levels from new controller families. Pull-up resistance (25 k Ω) forces the IC to recessive mode, if TXD-Pin is not connected. TXD low signal drives the transmitter into dominant state.

3.7 Transmitter

A integrated complex compensation technique allows stable data transmission up to 1 MBaud. Low level on TXD input forces bus line voltages CANH to 3.5V, CANL to 1.5V with a termination resistor of 60Ω. In the case of a line short circuit, like CANH to GND, CANL to VCC, integrated short current limitation circuitry allows a maxi mum current of 150 mA. If junction temperature rises above typical 163°C an internal overtemperature protection shuts down both output stages, the receive mode will stay activated.

3.8 Split Termination Concept

With a modified bus termination (see Figure 8-3 on page 10 ) a reduction of emission and a higher immunity of the bus system can be achieved. The one 120 Ω resistor at the bus line end nodes is split into two resistors of equal value, i.e., two resistors of 60 Ω. The resistors for the stub nodes is recommended with two resistors of 1.3 k Ω. (for example 8 stub nodes and 2 bus end nodes) Notice: The bus load of all the termination resistors has to stay within the range of 50Ω to 65Ω. The common mode signal at the centre tap of the termination is connected to ground via a capacitor of e.g., C split = 10 nF to 100 nF. A separate ground lead to the ground pin of the mod- ule connector is recommended.

4582D–BCD–06/06 ATA6660 4. Absolute Maximum Ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Parameters Symbol Conditions Min. Max. Unit Supply voltage V CC –0.3 +6 V DC voltage at pins 1, 4, 5 and 8 VTXD, VREF, VRS, VRXD –0.3 V CC +0.3 V DC voltage at pins 6 and 7 V CANH, VCANL 0V < VCC < 5.25V; no time limit –40.0 +40.0 V Transient voltage at pins 6 and 7 –150 +100 V Storage temperature T Stg –55 +150 °C Operating ambient temperature T amb –40 +125 °C ESD classification All pins HBM ESD S.5.1 MM JEDEC A115A ±3000 ±200 V V ESD classification Pin 6, 7 versus pin 2 HBM 1.5 kΩ, 100 pF MM 0Ω, 200 pF ±8000 ±300 V V 5. Thermal Resistance Parameters Symbol Value Unit Thermal resistance from junction to ambient R thJA 160 K/W 6. Truth Table VCC TXD RS CANH CANL Bus State RXD 7. RS (Pin 8) Functionality Slope Control Mode Voltage and Current Levels VRS > 0.87 × VCC Standby I RS < | 10 µA | VRS < 0.3 × VCC Constant slope control I RS ≤ 500 µA

4582D–BCD–06/06 ATA6660 8. Electrical Characteristics VCC = 4.75V to 5.25V; Tamb = –40°C to +125°C; RBus = 60Ω; unless otherwise specified. All voltages referenced to ground (pin 2); positive input current. No. Parameters Test Conditions Pi n Symbol Min. Typ. Max. Unit Type*

1 Supply Current

1.1 Supply current

VTXD = 0V VRS = 0V 3I vcc_dom 45 60 mA A

1.2 Supply current

VTXD = 5V VRS = 0V 3I vcc_rec 10 15 mA A

1.3 Supply current stand-by V RS = 5V 3 I vcc_stby 600 980 µA A

2 Transmitter Data Input TXD

2.1 HIGH level input

VTXD = 5V VRS = 0V 1V TXDH 2V CC + 0.3 V A

2.2 LOW level input voltage VTXD = 0V

VRS = 0V 1V TXDL –0.3 +1 V A

2.3 HIGH level input current V TXD = VCC 1I IH –1 0 µA A

2.4 LOW level input voltage V TXD = 0V 1 I IL –500 -50 µA A

3 Receiver Data Output RXD

3.1 High level output

voltage IRXD = –100 µA 4 V RXDH 0.8 × VCC VCC VA

3.2 Low level output

voltage IRXD = 1 mA 4 V RXDL 00 . 2 × VCC VA

3.3 Short current at RXD VTXD = 5V

VRXD = 0V 4I RXDs1 –3 -1 mA A

3.4 Short current at RXD VTXD = 0V

VRXD = 5V 4I RXDs2 26 m A A

4 Reference Output Voltage VREF

4.1 Reference output

VRS = 0V; –50 µA < I5 < 50 µA 5V ref_no 0.45 VCC 0.55 VCC VA

4.2 Reference output

VRS = 5 V; –5 µA < I5 < 5 µA 5V ref_stby 0.4 × VCC 0.6 VCC VA

5 DC Bus Transmitter CANH; CANL

5.1 Recessive bus voltage V TXD = VCC; no load 6, 7 VCANH;

2.0 2.5 3.0 V A

5.2 IO(CANH)(reces)

IO(CANL)(reces) –40V < VCANH; VCANL < 40V; 0V < VCC < 5.25V 6, 7 I O_reces –5 +5 mA A

5.3 CANH output voltage

dominant VTXD = 0V 6, 7 V CANH 2.8 3.5 4.5 V A

5.4 CANL output voltage

dominant VTXD = 0V 6, 7 V CANL 0.5 1.5 2.0 V A *) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter

4582D–BCD–06/06 ATA6660 5.5 Differential bus output voltage (VCANH – VCANL) VTXD = 0V; RL = 45Ω to 60Ω; VCC = 4.9V 6, 7 Vdiff dom 1.5 2 3.0 V A

5.6 V TXD = VCC; no load 6, 7 Vdiff rec –500 +50 mV A

5.7 Short-circuit CANH

VCANH = –10V TXD = 0V 6, 7 I CANH_SC –35 –100 mA A

5.8 Short-circuit CANL

VCANL = 18V TXD = 0V 6, 7 I CANL_SC 50 - 150 mA A

6 DC Bus Receiver CANH; CANL

6.1 Differential receiver threshold voltage normal mode –10V < VCANH < +10V –10V < VCANL < +10V 6, 7 V rec_th 0.5 0.7 0.9 V A 6.2 Differential receiver threshold voltage stand-by mode VRS = VCC 6, 7 V rec_th_stby 0.5 0.7 0.9 V A

6.3 Differential input

hysteresis 6, 7 V diff(hys) 70 mV A 6.4 CANH and CANL common mode input resistance 6, 7 R i 51 52 5 k Ω A

6.5 Differential input

resistance 6, 7 R diff 10 30 100 k Ω A 6.6 Matching between CANH and CANL common mode input resistance 6, 7 R i_m –3 +3 % A

6.7 CANH, CANL input

capacitance 6, 7 C i 20 pF D

6.8 Differential input

capacitance 6, 7 C diff 10 pF D

6.9 CANH, CANL input

VCC = 0V VCANH = 3.5V VCANL = 1.5V 6, 7 ILI(CANH); ILI(CANL) 250 µA A

7 Thermal Shut-down

7.1 Shut-down junction temperature for CANH/CANL T J(SD) 150 163 175 °C B 7.2 Switch on junction temperature for CANH/CANL TJ(SD) 140 154 165 °C B

7.3 Temperature hysteresis T Hys 10 K B

Electrical Characteristics (Continued) VCC = 4.75V to 5.25V; Tamb = –40°C to +125°C; RBus = 60Ω; unless otherwise specified. All voltages referenced to ground (pin 2); positive input current. No. Parameters Test Conditions Pi n Symbol Min. Typ. Max. Unit Type* *) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter

4582D–BCD–06/06 ATA6660 8 Timing Characteristics Normal Mode, V RS ≤ 0.3 × VCC (see Figure 8-1 on page 9)

8.1 Delay TXD to bus

active VRS = 0V t d(TXD-BUS_ON) 120 180 ns A

8.2 Delay TXD to bus

inactive VRS = 0V t d(TXD-BUS_OFF) 50 100 ns A

8.3 Delay TXD to RXD,

recessive to dominant VRS = 0V 6, 7 t d_activ(TXD-RXD) 200 420 ns A

8.4 Delay TXD to RXD,

dominant to recessive VRS = 0V t d_inactiv(TXD-RXD) 180 460 ns A 8.5 Difference between Delay TXD to RXD dominant to Delay recessive t diff = td_activ(TXD-RXD) – td_inactiv(TXD-RXD) tdiff –280 80 ns A 9 Timing Characteristi cs Stand-by Mode VRS ≥ 0.87 × VCC

9.1 Bus dominant to RXD

low in stand-by mode VRS = VCC 4t dRxDL 300 450 ns A 9.2 Wake up time after stand-by mode (time delay between stand-by to normal mode and to bus dominant) TXD = 0V VRS from 0V to V CC 6, 7 T wake_up 2µ s A

10 Standby/Normal Mode Selectable via RS (Pin 8)

10.1 Input voltage for normal

mode VRS = VCC 8V RS 0.3 × VCC VA

10.2 Input current for normal

mode VRS = 0V 8 I RS –700 µA A

10.3 Input voltage for

stand-by mode 8V stby 0.87 × VCC VA 8. Electrical Characteristics (Continued) VCC = 4.75V to 5.25V; Tamb = –40°C to +125°C; RBus = 60Ω; unless otherwise specified. All voltages referenced to ground (pin 2); positive input current. No. Parameters Test Conditions Pi n Symbol Min. Typ. Max. Unit Type* *) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter

4582D–BCD–06/06 ATA6660 Figure 8-1. Timing Diagrams TXD Vdiff CANH CANL RXD HIGH LOW dominant (bus activ) recessive (bus inactive) HIGH LOW 0.7VCC 0.3VCC 0.9V 0.5V td (TXD_bus_on) t d_activ(TXD_RXD) td_inactiv (TXD_RXD) td (TXD_bus_off) dominant CANH dominant CANL

4582D–BCD–06/06 ATA6660 10. Package Information 11. Revision History 9. Ordering Information Extended Type Number Package Remarks ATA6660-TAPY SO8 Taped and reeled, Pb-free ATA6660-TAQY SO8 Taped and reeled, Pb-free technical drawings according to DIN specifications Dimensions in mm 5.00 4.85 0.4 1.27 3.81 1.4 0.25 0.10 5.2 4.8 3.7 3.8 6.15 5.85 0.2 Please note that the following page numbers referred to in this section refer to the specific revision mentioned, not to this document. Revision No. History 4582D-BCD-06/06

Put datasheet in a new template
Pb-free logo on page 1 deleted
Table “Ordering Information” on page 11 changed 4582C-BCD-09/05
Put datasheet in a new template
Pb-free logo on page 1 added
Heading rows on Table “Absolute Maximum Ratings” on page 5 added
Table “Ordering Information” on page 11 changed

Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL ’S TERMS AND CONDI- TIONS OF SALE LOCATED ON ATMEL ’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTOR Y WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICU LAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR I NCIDEN- TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF AT MEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or co mpleteness of the contents of this document and reserves the rig ht to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained her ein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not int ended, authorized, or warranted for use as components in applications in tended to support or sustain life. Atmel Corporation Atmel Operations

2325 Orchard Parkway

San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Regional Headquarters Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza

77 Mody Road Tsimshatsui

Tel: (852) 2721-9778 Fax: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Memory San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 Microcontrollers San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 La Chantrerie BP 70602

44306 Nantes Cedex 3, France

13106 Rousset Cedex, France

1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel: (44) 1355-803-000 Fax: (44) 1355-242-743 RF/Automotive Theresienstrasse 2 Postfach 3535

74025 Heilbronn, Germany

1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Biometrics/Imaging/Hi-Rel MPU/ High-Speed Converters/RF Datacom Avenue de Rochepleine BP 123

38521 Saint-Egreve Cedex, France

www.atmel.com/literature 4582D–BCD–06/06 © 2006 Atmel Corporation . All rights reserved. Atmel ®, logo and combinations thereof, Everywhere Y ou Are ® and others are registered trade- marks or trademarks of Atmel Corporation or its subsidiari es. Other terms and product names may be trademarks of others.

Selected Specification

ATMEL Corporation ATA6660 overview.

Overview

ATA6660 is listed in the Logic IC category. Available datasheets include documents from ATMEL Corporation. DigiCamel provides a local PDF and searchable HTML technical text for online reference.

Summary

High-speed Can Transceiver

Description

High-speed Can Transceiver

Source title ATA6660_06 Datasheet(PDF) - ATMEL Corporation

Related Parts

More parts from the same family.

Browse manufacturer