AT97SC3203S ATMEL

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 8

Technical content

Features

  • Full Trusted Computing Group (TCG) Trusted Platform Module (TPM) Version 1.2 Compatibility
  • Single-chip Turnkey Solution
  • Hardware Asymmetric Crypto Engine
  • 2048-bit RSA Sign in 500 ms
  • AVR® RISC Microprocessor
  • Internal EEPROM Storage for RSA Keys
  • 100 kHz System Management Bus (SMBus™ ) Two-wire Interface
  • Secure Hardware and Firmware Design and Chip Layout
  • True Random Number Generator (RNG) - FIPS 140-2 Compliant
  • NV Storage Space for 1280 bytes of user defined data
  • 3.3V ±10% Supply Voltage
  • 28-lead TSSOP Package or 40-lead QFN Package
  • 0–70°C Temperature Range

Description

The AT97SC3203S is a fully integrated security module designed to be integrated into embedded systems. It implements version 1.2 of the Trusted Computing Group (TCG) specification for Trusted Platform Modules (TPM). The TPM includes a cryptographic accelerator capable of computing a 2048-bit RSA signature in 500 ms and a 1024-bit RSA signature in 100 ms. Performance of the SHA-1 accelerator is 50 µs per 64-byte block. In most cases, TCG key generation operations will be completed using a proprietary mechanism in less than 1 msec. Table 1. Pin Configurations is available through your local Atmel sales office.

2 AT97SC3203S

Figure 1. Pin Configurations Figure 2. AT97SC3203S Block Diagram

33 MHz

5132AS–TPM–1/07 Description (continued) Communication to and from the TPM occurs through a modified 100-kHz SMBus two- wire interface. The TPM includes a hardware random number generator, including a FIPS-approved Pseudo Random Number Generator, that is used for key generation and TCG protocol functions. The RNG is also available to the system to generate random numbers that may be needed during normal operation. The chip uses a dynamic internal memory management scheme to store multiple RSA keys. Other than the standard TCG commands (TPM_FlushSpecific, TPM_Loadkey2), no system intervention is required to manage this internal key cache. Full documentation for TCG primitives can be found on the TCG Web site located at www.trustedcomputinggroup.org . This specification includes only mechanical, electrical and SMBus protocol information

4 AT97SC3203S

Table 2. Ordering Information

5132AS–TPM–1/07 Package Drawing 28A3 – TSSOP

2325 Orchard Parkway

San Jose, CA 95131 TITLE DRAWING NO. R REV. 1/8/02 COMMON DIMENSIONS (Unit of Measure = mm) SYMBOL MIN NOM MAX NOTE D 9.60 9.70 9.80 2, 5 E 8.10 BSC E1 6.00 6.10 6.20 3, 5 A –– 1.20 A2 0.80 1.00 1.05 b 0.19 – 0.30 4 e 0.65 BSC L 0.45 0.60 0.75 L1 1.00 REF 28A3, 28-lead, 6.1 x 9.7 mm Body, 0.65 pitch, Thin Shrink Small Outline Package (TSSOP) Notes: 1. This drawing is for general information only. Please refer to JEDEC Drawing MO-153, Variation DB for additional informa tion. 2. Dimension D does not include mold Flash, protrusions or gate burrs. Mold Flash, protrusions and gate burrs shall not exceed 0.15 mm (0.006 in) per side. 3. Dimension E1 does not include inter-lead Flash or protrusions. Inter-lead Flash and protrusions shall not exceed 0.25 mm (0.0 10 in) per side. 4. Dimension b does not include Dambar protrusion. Allowable Dambar protrusion shall be 0.08 mm total in excess of the b dimension at maximum material condition. Dambar cannot be located on the lower radius of the foot. Minimum space between protrusion and adjacent lead is 0.07 mm. 5. Dimension D and E1 to be determined at Datum Plane H. 28A3 A A L D A2 E E1 e b Top View Side View End View

6 AT97SC3203S

5132AS–TPM–1/07 40ML1 - QFN San Jose, CA 95131 TITLE DRAWING NO. R REV. A Side View 40ML1, 40-lead 6.0 x 6.0 mm Body, 0.50 mm Pitch, Molded Quad Flat No Lead Package (MLF2) A40ML1 3/9/04 Notes: 1. This drawing is for general information only. Refer to JEDEC Drawing MO-220, Variation WJJD-2, for proper dimensions, tolerances, datums, etc. 2. Dimension b applies to metallized terminal and is measured between 0.15 mm and 0.30 mm from the terminal tip. If the terminal has the optional radius on the other end of the terminal, the dimension should not be measured in that radius area. COMMON DIMENSIONS (Unit of Measure = mm) SYMBOL MIN NOM MAX NOTE D 6.00 BSC E 6.00 BSC D2 3.95 4.10 4.25 E2 3.95 4.10 4.25 A - 0.85 0.90 A1 0.0 0.01 0.05 A2 - 0.65 0.70 A3 0.20 REF L 0.30 0.40 0.50 e 0.50 BSC b 0.18 0.23 0.30 2 D E Top View N Pin 1 Indicator L PIN1 ID b N e Bottom View

5132AS–TPM–1/07

Revision History

Doc. Rev. Date Comments 5132AS 1/2007 Implemented revision history Added ‘Summary’ to page 1 Revised summary disclaimer text on page 1

Printed on recycled paper. Disclaimer: The information in this document is provided in connection with Atmel products. No license, expr ess or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI- TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LI ABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTOR Y WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO , THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICU LAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR I NCIDEN- TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTE RRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or co mpleteness of the contents of this document and reserves the ri ght to make changes to specifications and product descriptions at any time withou t notice. Atmel does not make any commitm ent to update the information contained her ein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not int ended, authorized, or warranted for use as components in applications intended to support or sustain life. Atmel Corporation Atmel Operations San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Regional Headquarters Europe Atmel Sarl Route des Arsenaux 41 Case Postale 80 CH-1705 Fribourg Switzerland Tel: (41) 26-426-5555 Fax: (41) 26-426-5500 Asia Room 1219 Chinachem Golden Plaza

77 Mody Road Tsimshatsui

Tel: (852) 2721-9778 Fax: (852) 2722-1369 Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Memory San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 Microcontrollers San Jose, CA 95131, USA Tel: 1(408) 441-0311 Fax: 1(408) 436-4314 La Chantrerie BP 70602

44306 Nantes Cedex 3, France

13106 Rousset Cedex, France

1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Scottish Enterprise Technology Park Maxwell Building East Kilbride G75 0QR, Scotland Tel: (44) 1355-803-000 Fax: (44) 1355-242-743 RF/Automotive Theresienstrasse 2 Postfach 3535

74025 Heilbronn, Germany

1150 East Cheyenne Mtn. Blvd. Colorado Springs, CO 80906, USA Tel: 1(719) 576-3300 Fax: 1(719) 540-1759 Biometrics Avenue de Rochepleine BP 123

38521 Saint-Egreve Cedex, France

www.atmel.com/literature 5132AS–TPM–1/07 ©2007 Atmel Corporation . All rights reserved. Atmel ®, logo and combinations thereof, Everywhere You Are ®, AVR®, SMBus ™ and others, are registered trademarks or trademarks of Atmel Corporation or it s subsidiaries. Other terms and pr oduct names may be trademarks o f others.