AT-2300 HIROSE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
Stripline Mounting Fixed Attenuators AT-2300 Series - (40)0123AT 3 421 3dB E 4.8(0.74) 10.80.1(0.64) 0.9 2.8 1.1 Ground terminals 0.81 I Features 1. Wide Range of Variations for Each Type of Attenuator Attenuation levels available in 1 dB steps from 0 to 6 dB and from 8 to 10 dB, and 20 dB for a total of 11 types of variations. I Product Specifications Ratings Frequency range Characteristic impedance Maximum input power DC to 2.5GHz (Note) 50 ø Operating temperature Operating humidity -10ç to +65ç 95% max. Item 1.Vibration 2.Shock 3.Temperature cycle Requirement Conditions No electrical discontinuity of 1 µ or more. No damage, cracks, or parts dislocation. Frequency of 10 to 2000 Hz, overall amplitude of 1.5mm, acceleration of 98m/s2, 2 hours in each of the 3 directions. Acceleration of 490m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis. Temperature : -55ç / +15ç to +35ç / +85ç / +15ç to +35ç Time : 30 / 2 to 3 / 30 / 2 to 3 (Minutes) 5 cycles Note: DC to 600MHz for AT-2320. Component Attenuation element Tab MaterialFinish Metal film Copper Tin-lead plating The test method conforms to MIL-STD-202. *Each attenuator is supplied in individual package IMaterials / Finishes AX:Fixed attenuator Series name :2300 Series Attenuation 00-(0) : 0 dB (Through) 01 : 1dB 06 : 6dB (40): RoHS Compliant IOrdering information IDimensions AT-2303 shown The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
AT-2300 Series SeriesGStripline Mounting Fixed Attenuators I Specifications I Typical data Part number Attenuation (dB) DC~ 1,000MHz 1,000~ 1,500MHz 1,500~ 2,500MHz DC~2,500MHz V.S.W.R(Max) Characteristic Impedance (ø) Power (W) Mounting surface temperature (ç Max.) at time of maximum input power Weight (g) AT-2300-(0)(40) AT-2301(40) AT-2302(40) AT-2303(40) AT-2304(40) AT-2305(40) AT-2306(40) AT-2308(40) AT-2309(40) AT-2310(40) AT-2320(40) +0.3 1±0.3 2±0.3 3±0.3 4±0.3 5±0.3 6±0.3 8±0.3 9±0.3 10±0.3 0+0.5 1±0.5 2±0.5 3±0.5 4±0.5 5±0.5 6±0.5 8±0.5 9±0.5 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 +85 +85 +85 +85 +85 +85 +85 +85 +85 +85 +85 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 10±0.5 20±1.5(DC~600MHz) 1.2( DC~600MHz) 10±0.7 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.25 1.50 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 1.05 1.00 1.50 1.45 1.40 1.35 1.30 1.25 1.20 1.15 1.10 1.05 1.00 8.75 9.00 9.25 9.50 9.75 10.00 10.25 10.50 10.75 11.00 11.25 ATTENUATION ATTENUATION Frequency(GHz) VSWRVSWR Frequency(GHz) Frequency(GHz) Frequency(GHz) (dB)(dB) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
AT-2300 Series SeriesGStripline Mounting Fixed Attenuators IRecommended Mounting Pattern Grounding Pattern AT-2300(40) attenuation AT-2300(40) attenuation L 1~1.8mm Soldering area Soldering area Tab Tab Substrate Housing Pattern 50ø Line * The dotted line portion indicates the position of the pattern. High temperature solder * Set interval L of the signal pattern to 6 mm and interval S of the signal pattern and ground pattern to 1 to 1.8 mm. * Press the red seal onto the microstrip line surface and solder the tab. * Tab Soldering Conditions Soldering iron tip temperature: 260 to 290ç Time: Within 5 seconds * Note that althrough the high frequency characteristics will be somewhat degraded, please attach the tab with some slack in order to improve the thermal reliability. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.