AT-220 MA-COM

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

Features

  • Attenuation 2-dB Steps to 30 dB
  • High Accuracy
  • Low Intermodulation Product: +50 dBm IP3
  • Low DC Power Consumption: 50 µW
  • SOIC-16 Plastic Package
  • Tape and Reel Packaging Available
  • Temperature Stability +/-0.15 dB: -40°C to +85°C

Description

M/A-COM’s AT-220 is a 4-bit, 2-dB step GaAs MMIC digital attenuator in a low cost SOIC 16-lead surface mount plastic package. The AT-220 is ideally suited for use where high accuracy, fast switching, very low power consumption and low intermodulation products are required. Typical applications include radio and cellular equipment, wireless LANs, GPS equipment and other Gain/Level Control circuits. The AT-220 is fabricated with a monolithic GaAs MMIC using a mature 1-micron process. The process features full chip passivation for increased performance and reliability.

Ordering Information

AT-220 PIN SOIC 16-Lead Plastic Package AT-220TR* 1000 piece reel * Reference Application Note M513 for reel size information. Absolute Maximum Ratings 1 Parameter Absolute Maximum Input Power:

50 MHz

+27 dBm +34 dBm Control Voltage -8.5 V ≤ VC ≤ 5V Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding any one or combination of these limits may cause permanent damage to this device. Pin Configuration Pin No. Function Pin No. Function

1 VC1 9 RF2

2 VC1 10 GND

3 VC2 11 GND

4 VC2 12 GND

5 VC3 13 GND

6 VC3 14 GND

7 VC4 15 GND

8 VC4 16 RF1

RF1 GND GND GND GND GND GND RF2 16 dB 8 dB 4 dB 2 dB VC1 VC1 VC2 VC2 VC3 VC3 VC4 VC4

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Digital Attenuator, 30 dB, 4-Bit DC - 2.0 GHz Rev. V5 AT-220 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Electrical Specifications: TA = 25°C, VC = 0 V / −5 V, Z0 = 50 Ω Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss (reference state) DC - 0.5 GHz DC - 1.0 GHz DC - 2.0 GHz dB dB dB 1.5 1.6 1.8 1.7 1.8 2.1 Attenuation Accuracy 2 DC - 1.0 GHz DC - 2.0 GHz VSWR Ratio — 1.2:1 — Trise, Tfall 10% to 90% RF, 90% to 10% RF — nS — 12 — Ton, Toff 50% Control to 90% RF, 50% Control to 10% RF — nS — 18 — Transients In-Band — mV — 25 — 1 dB Compression Input Power Input Power

0.05 GHz

0.5 - 2.0 GHz dBm dBm IP2 Measured Relative to Input Power (For two-tone input power up to +5 dBm) 0.5 - 2.0 GHz dBm dBm IP3 Measured Relative to Input Power (For two-tone input power up to +5 dBm) 0.5 - 2.0 GHz dBm dBm ± (0.15 dB + 3% of Atten Setting in dB) dB ± (0.30 dB + 4% of Atten Setting in dB) dB Control Current |VC| = 5 V μA — 100 2. Attenuation accuracy specifications apply with negative bias control and low inductance grounding. VC4 VC4 VC3 VC3 VC2 VC2 VC1 VC1 Attenuation (dB) 1 0 1 0 1 0 1 0 Reference State 0 1 1 0 1 0 1 0 2 dB 1 0 0 1 1 0 1 0 4 dB 1 0 1 0 0 1 1 0 8 dB 1 0 1 0 1 0 0 1 16 dB 0 1 0 1 0 1 0 1 30 dB Control Inputs Truth Table 3 3. 0 = -0.2 V to 0 V, 1 = -8 V to -5 V. SOIC-16

  • North America Tel: 800.366.2266 / Fax: 978.366.2266 Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Digital Attenuator, 30 dB, 4-Bit DC - 2.0 GHz Rev. V5 AT-220 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves Insertion Loss Attenuation VSWR Attenuation Accuracy -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 AttenDev 2 AttenDev4 Attendev8 AttenDev16 AttenDev30 Frequency (GHz) +25°C -40°C +85°C Frequency (GHz) -30 -25 -20 -15 -10 Frequency (GHz) 1.0 1.2 1.4 1.6 1.8 2.0 IL 2 dB 4 dB 8 dB 16 dB Frequency (GHz)