DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Techsil Conductive Elastomer LTE-60-40D Performance of conductive elastomers vary from one application to another. Leader Tech, Inc. cannot guarantee that the above specifications will be met in your specific application. If you need assistance in testing your application, please do not hesitate to contact Leader Tech for further information. Global EMI Shielding Technology Center 12420 Race Track Rd., Tampa, Florida 33626 www.LeaderTechInc.com Copyright© Leader Tech, Inc. 2013 LTE-60-40D is a Shore A 40 durometer hardness silicone elastomer filled with nickel coated graphite particles as the conductive and shielding media. This material has good shielding properties and conductivity and is tested IAW MIL-DTL-83528. This material requires a lower compressive force in order to reach the desired state of compression. LTE-60-40D has excellent sealing properties at temperature extremes, is ozone resistant, and has a long shelf life if stored in the absence of moisture, light and sulfur. LTE-60-40D exhibits good performance in moderately corrosive environments and also provides a cost effective solution to your shielding gasket requirements. This material can be supplied as molded parts, die cut parts, extruded profiles, or as standard sheet stock. Please contact Leader Tech for additional information regarding your specific application. A passion in all we do The Leading Edge in EMI Shielding TechnologyTDS062813-LTE60-40D Technical Data SheetTechnical Data Sheet Techsil Conductive Elastomer LTE-60-40D The Leading Edge in EMI ShieldingTechnology Elastomer: Silicone Filler Material: Nickel Coated Graphite Color: Dark Grey (Custom colors available upon request) Electrical Properties Test Method After Vibration (ohm-cm) .100 After Exposure to EMP (ohm-cm) Volume Resistivity (ohm-cm) Shielding Effectiveness (db) Typical MIL-DTL-83528 (Para. 4.5.12) MIL-STD-285
20 MHz 110
100 MHz 110
600 MHz 105
2 GHz 105
10 GHz 100
Hardness (Shore A) (+/-7) 40 ASTM D2240 (MIL Para. 4.5.4) Tensile Strength (PSI) Min. 125 ASTM D412 (MIL Para. 4.5.6) Tear Strength (PPI) Min. 20 ASTM D624 (MIL Para. 4.5.8) Compression Set (%) Max. 40 ASTM D395 (MIL Para. 4.5.7) Upper Operating Temp. (0C) Max. +160 Maximum Continuous Use Temperature Lower Operating Temp (0C) Min. -55 ASTM D1329 (MIL Para. 4.5.14) Fluid Immersion NS MIL-DTL-83528 (Para. 4.5.17) LTE-60-40D is a Shore A 40 durometer hardness silicone elastomer filled with nickel coated graphite particles as the conductive and shielding media. This material has good shielding properties and con ductivity and is tested IAW MIL- DTL-83528. Th is material requires a lower compressive force in order to reach the desired state of compressio n. LTE-60-40D has excellent sealing properties at temperature extremes, is ozone resistant, an d has a long shelf life if stored in th e absence of mo isture, light and sulfur. LTE-60-40D ex hibits good performance in moderately corrosive environments and also provides a cost effective solu tion to y our shielding gasket req uirements. This material can be supplied as mo lded parts, die cut parts, extruded profiles, or as standard sheet stock. Please contact Leader Tech for additional in formation regarding your specific application. Physical Properties TDS062813‐LTE60‐40D SUR=Survivable NS=Not Survivable Performance of conducve elastomers varies from one applicaon to another. Leader Tech, Inc. cannot guarantee that the above specicaons will be met in your applicaon. If you need assistance in tesng your applicaon, please do not hesitate to contact Leader Tech for further informaon.