DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

ELECTRICAL SPECIFICATIONS: Pb RoHS Compliant ABRACON IS ISO 9001 / QS 9000 CERTIFIED ABRACON IS ISO 9001:2008 CERTIFIED

30332 Esperanza, Rancho Santa Margarita, California92688

tel 949-546-8000| fax 949-546-8001 | www.abracon.com Revised: 04.04.12Visit www.abracon.com for Terms & Conditions of Sale FEATURES: APPLICATIONS: ABRACON P/N: ASPI-1367 Operating Temperature: Storage Temperature: OPTIONS AND PART IDENTIFICATION SHIELDED SMD CHIP POWER INDUCTOR ASPI-1367

  • 100%lead (Pb) free.
  • Lowest DCR/uH, in this package size.
  • Frequency range up to 5.0MHZ.
  • Handles high transient current spikes without saturation
  • Ultra low buzz noise, due to composite construction.
  • PDA/Notebook/Desktop/Server applications.
  • Low profile, high current power supplies.
  • Battery powered devices.
  • DC/DC converter for Field Programmable Gate Array(FPGA) Test Conditions 1. Inductance tested at 200kHz, 0.25V, 0A; Tolerance M=±20%, N=±30% 2. All test data is in reference to 25°C ambient. 3. Isat will cause the inductance value to drop approximately 30% 4. Irms will cause an approximate ΔT of 40°C 5. The part temperature (ambient + temp. rise) should not exceed 125°C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 6. Please contact Abracon for the availability of other inductance values. -40˚C to +125˚C Less than +40˚C, 70% RH. ASPI-1367- - *N for 0.1µH *M for 0.33~10µH Part Number L Tolerance RDC RDC Isat Irms ASPI-1367- (µH) (M, N) Typ Max (A) (A) 100 10 M 17.0 18.5 15.5 10.0 Inductance Code Please refer to the Electrical Spec Table Packaging T: Tape and Reel (250pcs / reel) Tolerance M: ±20% * N: ±30% * 14.0 x 12.9 x 6.7mm (mΩ) (mΩ)

ISO 9001:2008 CERTIFIED tel 949-546-8000| fax 949-546-8001 | www.abracon.com Revised: 04.04.12Visit www.abracon.com for Terms & Conditions of Sale SHIELDED SMD CHIP POWER INDUCTOR ASPI-1367 14.0 x 12.9 x 6.7mm INDUCTANCE AND TEMPERATURE CURVE R33 OUTLINE DIMENSIONS: Recommended Land Pattern G H I 14.5 5.0 8.0 Dimension: mm A B C D E F 4.0±0.5 for L≤1.5uH 3.0±0.5 for L=2.2uH 4.7±0.3 for L＞2.2uH 8.4 ref. 2.0±0.5 G I H

ISO 9001:2008 CERTIFIED tel 949-546-8000| fax 949-546-8001 | www.abracon.com Revised: 04.04.12Visit www.abracon.com for Terms & Conditions of Sale SHIELDED SMD CHIP POWER INDUCTOR ASPI-1367 14.0 x 12.9 x 6.7mm REFLOW PROFILE: Storage Conditions and Handling (1) Temperature and humidity conditions : less than 40oC and 70% RH. (2) Products should be used within 6 months. (3) The packaging material should be kept where no chlorine or sulfur exists in the air. (4) Do not touch the electrodes (soldering terminals) with fingers as this may lead to deterioration of solder ability (5) The use of tweezers or vacuum pick-ups is strongly recommended for individual components. (6) Bulk handling should ensure that abrasion and mechanical shock are minimized. Profile Feature Assembly Average Ramp-Up Rate (Ts max to Tp) 3°C /second max. Preheat -Temperature Min (Ts min) -Temperature Max (Ts max) -Time (ts min to ts max) 150°C 200°C 60-180 seconds Time maintained above: -Temperature (TL) -Time (tL) 217°C 60-150 seconds Peak/Classification Temperature (Tp) 245 +0°C Time within 5°C of actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 6°C/seconds max Time 25°C to Peak Temperature 8 minutes max. TAPE & REEL: T= tape and reel (250pcs/reel) A B C D 330 100 13.5 24 A0 B0 K0 13.2 13.9 7.0 Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.