DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

LOW PROFILE HIGH CURRENT SMD SHIELDED POWER INDUCTOR ASPI-1338 STANDARD SPECIFICATIONS: APPLICATIONS:FEATURES: Pb RoHS Compliant ABRACON IS ISO 9001 / QS 9000 CERTIFIED ABRACON IS ISO 9001:2008 CERTIFIED

30332 Esperanza, Rancho Santa Margarita, California 92688

tel 949-546-8000 | fax 949-546-8001| www.abracon.com Revised: 04.12.12Visit www.abracon.com for Terms & Conditions of Sale OPTIONS AND PART IDENTIFICATION: (Left blank if standard)

  • 100% lead (Pb) free.
  • Lowest DCR/uH, in this package size.
  • Frequency range up to 5.0MHZ.
  • Handles high transient current spikes without saturation
  • Ultra low buzz noise, due to composite construction.
  • PDA/Notebook/Desktop/Server applications.
  • Low profile, high current power supplies.
  • Battery powered devices.
  • DC/DC converter for Field Programmable Gate Array(FPGA) Key Electrical Specifications @25oC Part Number Inductance @ 0A Tolerance Test Freq DCR Typ DCR Max Saturation Current Temperature Rise Current Units μH % kHz mΩ mΩ A A Symbol L N, M Isat* Irms* ASPI-1338-8R2 8.2 M 200 26.5 31 13.5 8.0 Contact ABRACON for other values available. Test Conditions 1. Inductance tested at 200kHz, 0.25V, 0A; Tolerance M=±20%, N=±30% 2. All test data is in reference to 25°C ambient. 3. Isat will cause the inductance value to drop approximately 30% 4. Irms will cause an approximate ΔT of 40°C 5. The part temperature (ambient + temp. rise) should not exceed 125°C under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 6. Please contact Abracon for the availability of other inductance values. PARAMETERS ABRACON P/N: Operating temperature: Storage temperature: ASPI-1338 xxxx -40˚C to +125˚C Less than +40˚C, and 70% RH 12.9 x 13.8 x 3.8mm ASPI-1338- - *N for 0.22µH *M for 8.2µH Inductance Code Please refer to the Electrical Spec Table Packaging T: Tape and Reel (500pcs / reel) Tolerance M: ±20% * N: ±30% *

DC current 0A 10A 20A 30A 38.5A 40A 50A 60A 65A 70A 80A ASPI-1338-R22 DC current 0A 2A 4A 6A 8A 10A 12A 13.5A ASPI-1338-8R2 LOW PROFILE HIGH CURRENT SMD SHIELDED POWER INDUCTOR ASPI-1338 Pb RoHS Compliant ABRACON IS ISO 9001 / QS 9000 CERTIFIED ABRACON IS ISO 9001:2008 CERTIFIED tel 949-546-8000 | fax 949-546-8001| www.abracon.com Revised: 04.12.12Visit www.abracon.com for Terms & Conditions of Sale 12.9 x 13.8 x 3.8mm ELECTRICAL CHARACTERISTIC CURVES OUTLINE DRAWING: Recommended Land Pattern Dimension: mm A Max B Max C Max D E Ref F G H I G H I 14.5 5.0 8.0

LOW PROFILE HIGH CURRENT SMD SHIELDED POWER INDUCTOR ASPI-1338 Pb RoHS Compliant ABRACON IS ISO 9001 / QS 9000 CERTIFIED ABRACON IS ISO 9001:2008 CERTIFIED tel 949-546-8000 | fax 949-546-8001| www.abracon.com Revised: 04.12.12Visit www.abracon.com for Terms & Conditions of Sale 12.9 x 13.8 x 3.8mm REFLOW PROFILE: I Storage Conditions and Handling (1) Temperature and humidity conditions : less than 40oC and 70% RH. (2) Products should be used within 6 months. (3) The packaging material should be kept where no chlorine or sulfur exists in the air. (4) Do not touch the electrodes (soldering terminals) with fingers as this may lead to deterioration of solder ability (5) The use of tweezers or vacuum pick-ups is strongly recommended for individual components. (6) Bulk handling should ensure that abrasion and mechanical shock are minimized. Profile Feature Assembly Average Ramp-Up Rate (Ts max to Tp) 3°C /second max. Preheat -Temperature Min (Ts min) -Temperature Max (Ts max) -Time (ts min to ts max) 150°C 200°C 60-180 seconds Time maintained above: -Temperature (TL) -Time (tL) 217°C 60-150 seconds Peak/Classification Temperature (Tp) 245+0°C Time within 5°C of actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 6°C/seconds max Time 25°C to Peak Temperature 8 minutes max. Dimension: mm Ao 13.2 Bo 13.8 Ko 4.0 A 330 B 100 C 13.5 D 24 TAPE & REEL: ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. T: 500pcs/Reel