DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

ELECTRICAL SPECIFICATIONS: SMD Multilayer Chip Power Inductor FEATURES: APPLICATIONS: 2.0 x 1.25 x 0.9mm ABRACON IS ISO 9001 / QS 9000 CERTIFIED ABRACON IS CERTIFIED ISO 9001:2008 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Revised: 02.12.13Visit www.abracon.com for Terms & Conditions of Sale Operating Temperature: -40˚C to +85˚C Storage Temperature: -10˚C to +40˚C, RH 70% (Max.)

  • High DC bias current due to trench technology
  • Much lower profile than any other series
  • Monolithic structure for high reliability
  • Excellent solderability and heat resistance
  • Magnetically shielded structure to eliminate cross coupling Unless otherwise specified, the standard atmospheric conditions for measurement/test as: a. Ambient Temperature: 20±15˚C b. Relative Humidity: 65±20% c. Air Pressure: 86 kPa to 106 kPa Inductance (L): HP4291B+HP16192A or Equivalent, tested at 1MHz, -20dBm or 50mV. Direct Current Resistance (DCR): Milliohmeter-HP4338B or Equivalent Self-Resonant Frequency (SRF): HP4291B+HP16192A or Equivalent, -20dBm or 50mV. Temperature Rise current (Irms): Electric Power, Electric current meter, Thermometer. Irms is the value of DC current as chip surface temperature rose just 40°C against chip initial surface temperature. Saturation Current (Isat): HP6632B system DC power supply, HP4291B+HP16192A+HP16200A or equivalent. Isat is the value of DC current as inductance decreased just 30% against initial value Pb RoHS/RoHS II Compliant Part Number ASMPH-0805- Inductance Code Inductance Tolerance DCR SRF Min. Temperature Rise Current (max) Saturation Current (Typ) Units μH % Ω ± 25% MHz mA mA Symbol L M=±20% N=±30% DCR SRF Irms Isat ASMPH-0805-R47 0.47 M, N 0.08 100 1500 1200 ASMPH-0805-1R0 1.0 M, N 0.11 60 1300 1150 ASMPH-0805-1R5 1.5 M, N 0.16 50 1100 800 ASMPH-0805-2R2 2.2 M, N 0.20 40 900 500 ASMPH-0805-3R3 3.3 M, N 0.20 30 900 350 ASMPH-0805-4R7 4.7 M, N 0.25 30 800 280 ASMPH family is a miniature type of multilayer power inductors constructed using low loss ferite material to support high-speed switching frequencies.The compact size and high efficiency is ideal for DC/DC converter applications in space limited boards. Switching mode regulators for smart phones and cameras. Buck convertersfor RFIC, RFPA and Audio Codec modules. Boost converters for flash drivers. Wireless cards, DVD players and other electronic devices.

SMD Multilayer Chip Power Inductor ABRACON IS ISO 9001 / QS 9000 CERTIFIED ABRACON IS CERTIFIED ISO 9001:2008 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Revised: 02.12.13Visit www.abracon.com for Terms & Conditions of Sale PART IDENTIFICATIONS: OUTLINE DRAWING: Recommended Land Pattern Dimension: mm MATERIALS: Pb RoHS/RoHS II Compliant 2.0 x 1.25 x 0.9mm Part Name Material

1 Base Material Ferrite

2 Internal Conductor Ag

3 Pull out Electrode Ag

4 Terminal Electrode Ag (Inner layer)

Ni-Sn (Outer layer) 1 2 3 4 Top View Side View ASMPH-0805- - Inductance Code Please refer to the table above Tolerance M=±20% N=±30% Packaging T: Tape and Reel (3kpcs / reel) L W T a A B C

SMD Multilayer Chip Power Inductor ABRACON IS ISO 9001 / QS 9000 CERTIFIED ABRACON IS CERTIFIED ISO 9001:2008 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Revised: 02.12.13Visit www.abracon.com for Terms & Conditions of Sale REFLOW PROFILE: Packing T: 3,000pcs / reel Dimension: mm TAPE & REEL: ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. Pb RoHS/RoHS II Compliant 2.0 x 1.25 x 0.9mm Preheat Condition 150 to 200 ˚C; 60 to 120 sec. Allowed time above 217 ˚C 60 to 90 sec. Max temperature 260 ˚C Max time at max temperature 10 sec. Solder paste Sn/3.0Ag/0.5Cu Allowed Reflow time 2x max. 2.45 ±0.2mm 13. 5±0.2mm 8.4+1.5/ -0.0mm 4.3 ±0.2 mm 58±2.0 mm 178 ±2.0 mm 3.0 ±0.1 mm max ʻ14.4mm A B P K max T max