ASD15 ASTRODYNE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

Isolated and Regulated 15 WATT Modular DC/DC Converters ASD15 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458WWW.ASTRODYNETDI.COM Model Number Output Voltage Output Amps Input Range SINGLE OUTPUT ASD15-12S3 3.3 VDC 3.75 9-18VDC ASD15-48S3 3.75 20-75VDC ASD15-12S5 5 VDC 3 9-18VDC ASD15-48S5 3 20-75VDC ASD15-12S12 12 VDC 1.25 9-18VDC ASD15-48S12 1.25 20-75VDC ASD15-12S15 15 VDC 1 9-18VDC ASD15-48S15 1 20-75VDC DUAL OUTPUT ASD15-12D5 +/-5 VDC +/-1.5 9-18VDC ASD15-48D5 +/-1.5 20-75VDC ASD15-12D12 +/-12 VDC +/-0.62 9-18VDC ASD15-48D12 +/-0.62 20-75VDC ASD15-12D15 +/-15 VDC +/-0.5 9-18VDC ASD15-48D15 +/-0.5 20-75VDC Unit measures 1.6”W x 2”L x 0.375”H Wide 4:1 Input Range 9 to 36V or 18 to 75V Available High Efficiency Regulated Outputs 1500VDC Isolation Full EMI Shielding Standard Pinouts

Isolated and Regulated 15 WATT Modular DC/DC Converters ASD15 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458WWW.ASTRODYNETDI.COM INPUT SPECIFICATIONS Input Voltage, Nominal 12VDC 48VDC Input Voltage Ranges 9-18 20-75 VDC Input Surge Voltage 50V (12V Models), * 100V (48V Models), * 10 mS duration, min. OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Load Regulation single: ± 0.5% 20% - FL duals: ±1%, ±3% (5V mod) Preset Accuracy single: ± 3% max. duals: ±4% max. Line Regulation single: ± 0.5% duals: ± 1% Trim Range 0.5V min, 0.65V typ Temperature Coefficient ±0.01%/°C Ripple/Noise (Note 1) 100mV Pk-Pk, typ. Overvoltage Protection Clamp, 130-150% * Voltage Stability ± 0.05%, max Transient Response 12V: ± 4%, max 15V: ± 3%, max All others: ± 2%, max Short Circuit Protection Clamp, need to release load GENERAL SPECIFICATIONS On/Off Control (Ref to - Input pin) Logic “1”/Open=ON Logic “0”/GND=OFF Shutdown Idle Current 15mA Input-Out Isolation 1500VDC (48V)

500 VDC (12V)

In/Out Capacitance 1000 pF Efficiency at nom. Input 12V: 73%-80%, typ. 48V: 80%-86%, typ. Switching Frequency 450Khz ENVIRONMENTAL SPECIFICATIONS Oper. Temperature -25 to +71°C(FL) Storage Temperature -40 to +125°C * Maximum Case Temp 110°C * Input Fusing 12V: 4A, 48V: 2A MTBF 1,000,000 Hrs Mil Std 217, 25°C Shock/Vibration To MIL-STD 810°C PHYSICAL SPECIFICATIONS Case Material Aluminum Construction Fully Encapsulated Weight 1.6 oz, (40g) NOTES 1. Ripple & Noise is measured by using a 20MHz bandwidth oscilloscope and terminating the output with a 47uF electrolytic capacitor paralleled with a 0.1uF ceramic capacitor. * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. All specifications are typical at nominal input, full load, and 25°C unless other- wise noted

Isolated and Regulated 15 WATT Modular DC/DC Converters ASD15 series ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458WWW.ASTRODYNETDI.COM OUTPUT DERATING CURVE MECHANICAL DIMENSIONS -25 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient Temp, ° C Output Power, Watts Dual OutputsSingle OutputsPIN # Control No Pin No Pin + Output Trim Out.Ret. + Input - Input Trim + Output - Output Control No Pin - Input + Input Trim Connections + V - V To Pin 810Kohm Pot. Out.Ret. .178in 10.16mm 50.8mm 2.00in 2.54mm .10in 5.08mm .40in 10.16mm .40in .03in .40in 10.16mm .40in 10.16mm 0.64mm 1.60in 0.02mm 40.64mm 45.72mm 1.80in .10in 2.54mm7.62mm .30in .20in 4.52mm .375in 9.525mm ASD15 E.LIU 1 : 1 2D outline drawingsB 1 1 ASD15_B 5BOTTOM VIEW 2013/1/4 2014/12/24 Noumenon height changes from 8 mm to 10.3mm max Tolerance : . XX 0.5mm [0.02in] . XXX 0.25mm [0.01in] Noumenon height changes from 10.3 mm to 9.525mm SIZE REV DRAWING NO. DESCRIPTION DATE SHEET METAL TOLERANCE (UNLESS OTHERWISE SPECIFIED) PIERCING BENDING ANGULAR 300<X<800 25<X<100 8<X<25 ±0.1 ±0.1 ±0.15 ±0.2 ±0.3 ±0.25 ±0.2 ±0.15 ±1° APPROVED CHECKED DRAWN Projection SCALE UNIT MODEL NO. PART NO. MATERIAL TITLE mm 100<X<300 ±0.5° ±0.3 ±0.5 ±1.5° ±0.5° ±0.3°X<8 DIMENSION SHEET OF 2915