Download PDFAS204-80_07 SKYWORKS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
Features
G Integrateddriver5 V supplyvoltage G Highisolation(45dB @ 0.9 G Hz) G Low insertionloss(0.5dB @ 0.9 GHz) G SSOP-16 plasticpackage G Nonreflective allports G E SD rated atclass 1A HB M G Availablelead (Pb)-free and RoHS-comp liantMSL-1 @ 26 0 °C perJEDEC J-STD-020
Description
The AS204-80 isa high-isolationSP4T FET ICnonreflective switch withdriver.The insertionlossis0.5dB and isolationis 45 dB at0.9 GHz. The switchisidealforcellularbase station switch matrices. Parameter (1) Frequency Min. Typ. Max. Unit Insertionloss (2) 300 kHz–1.0GHz 0.4 0.6 dB 300 kHz–2.0 GHz 0.6 0.8 dB 300 kHz–2.5 GHz 0.7 0.9 dB 300 kHz–3.5 GHz 0.9 1.2 dB Isolation 300 kHz–1.0GHz 40 45 dB 300 kHz–2.0 GHz 30 38 dB 300 kHz–2.5 GHz 28 32 dB 300 kHz–3.5 GHz 22 25 dB VSWR (3) on state 300 kHz–3.5 GHz 1.3:1 VSWR (3) offstate 0.5GHz–3.5 GHz 1.5:1 ElectricalSpecificationsat 25 °C VCC = 5 V,Z O = 50Ω ,unless otherwise noted 2:4 Decoder 50 50 50 50 J3J4 CTL1 CTL2VCC Simplified Block Diagram 1.Allmeasu rementsm ade ina 50 Ω system,unlessotherwisespecified. 2. Insertionlosschanges by 0.003 dB/ °C. 3. Input/Output. Skywor ks offerslead(Pb)-free,RoHS (Restriction of Hazardous Substances)-compliantpackaging. NEW Innovation to GoTM Now available for purchase online. BUY NOW BUY NOW
Skyworks Solutions,Inc.• Phone [781]376-3000 • Fax [781]376-3100 • sales@skyworksinc.com• www.skyworksinc.com April18,2007 • Skyworks ProprietaryInformation• Productsand ProductInformationareSubjecttoChange WithoutNotice.• 200106 Rev.B DATA SHEET • AS 204-80,AS204-80LF Insertion Loss (dBm) Frequency (GHz) Insertion Loss vs. Frequency -1.0 -0.8 -0.6 -0.4 -0.2 J1–J2 J1–J3 J1–J4J1–J5 VSWR Frequency (GHz) VSWR vs. Frequency 1.0 1.2 1.4 1.6 1.8 2.0 J2–J5_On (lS11l) J2–J5_ON (lS22l)J2–J5_Off Isolation (dBm) Frequency (GHz) Isolation vs. Frequency J1–J2 J1–J3 J1–J5 -90 -80 -70 -60 -50 -40 -30 -20 J1–J4 TypicalPerformance Data VCC = 5 V,Z O = 50Ω ,unless otherwisenoted Parameter Condition Frequency Min. Typ. Max. Unit Switchingcharacteristics Rise,fall 10/90%or90/10%RF 75 ns On,off 50% CTL to90/10%RF 125 ns Videofeedthru TRISE = 1 ns,BW = 500 MHz 50 mV Inputpower for1 dB compression 0.5–2 GHz 26 dBm Intermodulationinterceptpoint(IP3) For two-toneinputpower 13 dBm 0.5–2 GHz 40 dBm 0.05GHz 29 dBm Thermal resistance 30 °C/W Controlvoltages (1) CTL1,2 low 0 0.5 V CTL1,2 high 2.4 5.0 V Supplyvoltage,V CC (1) 4.8 5.2 Supplycurrent VCC = 5 V 500 µA OperatingCharacteristicsat 25 °C VCC = 5 V,Z O = 50Ω ,unless otherwisenoted 1.V CC must be powered on by a minimum of10 ns priorto V CTL .
DATA SHEE T • AS204-80, AS204-80LF Skyworks Solutions,Inc.• Phone [781]376-3000 • Fax [781]376-3100 • sales@skyworksinc.com• www.skyworksinc.com 20 0106 Rev.B • Skyworks ProprietaryInformation• Productsand ProductInformationareSubjecttoChange WithoutNo tice. • April18,2007 3 Characteristic Value RFinputpower 0.8W > 500 MHz
0.2 W @ 50 MHz
Controlvoltage -0.2V,+6 V Operatingtemperature -40 °C to+85 °C Storagetemperature -65 °C to+150 °C ESD human body model Class1A AbsoluteMaximum Ratings Insertion ControlInput Loss Path J 1 to: CTL1 CTL2 J2 00 J3 10 J4 01 J5 11 TruthTable “0”= 0 to0.5V. “1” = 2.4 to5 V. Performanceisguaranteedonlyundertheconditions listedinthe specificationstableand is notguaranteedunderthefullrange(s)describedby theAbsoluteMax imum specifications. Exceedingany oftheabsolutem aximum/minimum specificationsm ay resultinpermanent dam age tothedeviceand willvoidthewarranty. CAUTION: Although thisdevice isdesigned to be as robust as possible,ESD (Electrostatic Discharge) can damage thisdevice.This device must be protected at alltimes from ESD. Staticcharges may easilyproduce poten - tials of severalkilovolts on the human body or equipment, which can discharge without detection. Industry-standardESD precautions mus t be employe d at alltimes. SSOP-16 (-80) 0.197 (5.00 mm)□ 0.189 (4.80 mm)□ 0.158 (4.00 mm)□ 0.150 (3.80 mm) 0.025□ (0.635 mm) Typ. Pin 1 Pin 16 0.244 (6.20 mm)□ 0.228 (5.80 mm) 0.068□ (1.73 mm) Max.
0.0196 X 45˚□
0.010□ (0.25 mm)□ Typ. 0.010 (0.25 mm)□ 0.004 (0.10 mm) 0.050 (1.27 mm)□ 0.016 (0.40 mm) 0.0098□ (0.25 mm) 8˚ Max. 5˚ -15˚□ R 0.013/□ 0.008 R 0.008□ Min. Recommended Solder Reflow Profiles Refer to the “Recommended Solder Reflow Profile” Application Note. Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. 50 Ω 50 Ω 50 Ω50 Ω GND CTL2 CTL1 GND GND GNDJ4 GND GND VCC GND GND 1234568 1615141312119 102:4 TTL Decoder CBL CBL CBL CBL CBL Pin Out DC blockingcapacitors(C BL )requiredforpositivevoltageoperation. CBL = 47 pF foroperationfrequency> 500 MHz.
Skyworks Solutions,Inc.• Phone [781]376-3000 • Fax [781]376-3100 • sales@skyworksinc.com• www.skyworksinc.com April18,2007 • Skyworks ProprietaryInformation• Productsand ProductInformationareSubjecttoChange WithoutNotice.• 200106 Rev.B DATA SHEET • AS 204-80,AS204-80LF Copyright© 2 002 ,20 03, 20 04,2 005,200 6,2 007,Skyworks Solutions,Inc.AllRightsReserved. Informationinthisdocum entisprovidedinconnectionw ithSkyw orksSolutions,Inc.(“Skyw orks”)productsorservices.These materials,includingtheinformationcontainedherein,areprovided by Skyworks as a service toits customersand may be used forinformationalpurposes onlyby thecustomer.Skyw orksassumes no responsibilityforerrorsoromissionsinthese materialsorthe informationcontainedherein.Skyworks m ay change itsdocumentation,products,services,specificationsorproductdescriptionsatany time,withoutnotice.Skyw orksmakes no commitment to updatethem aterialsorinformationand shallhave no responsibilitywh atsoeverforconflicts,incompatibilities,orotherdifficultiesarisingfrom any futurechanges. No license,whetherexpress,implied,by estoppelorotherwise,isgrantedtoany intellectualpropertyrightsby thisdocum ent.Skywo rks assum es no liability forany ma terials,productsor informationprovidedhereunder,includingthesale,distribution,reproductionoruse ofSkyworks products,informationormaterials,exceptas ma y be providedinSkyworks Terms and ConditionsofSale. THE MA TERIALS,PRODUCTS AND INFORMATION ARE PROVIDED “AS IS”WITHOUT WARRANTY OF ANY KIND,WHETHER EXPRESS, IMPLIED, STATUTORY,OROTHERWISE, INCLUD ING FITNESS FORA PARTICULARPURPOSE ORUSE, M ERCHANTABILITY,PE RFORMANCE, QUALITY ORNO N-INFRINGEMENT OF ANY INTELLE CTUAL PROPERTYRIGHT;ALL SUCH WARRANTIES ARE HERE BY EXPRESSLY DISCLAIMED. SKYWOR KS DOES NOT WARRANTTHE ACCURACY ORCOMPLET ENE SS OF THE INFORMATION,TEXT,GRAPHICS OROTHER ITEMS CONTAINED WITHIN THESE MATER IALS.SKYWORKS SHALL NOT BE LIABLE FORANY DAMAG ES, INCLUDING BUT NOT LIMITED TO ANY SPE CIAL,INDIRECT,INCIDENTAL, STATUTORY,ORCONSEQUENTIAL DAMAGES, INCLUDING WITHO UT LIMITATION, LOST REVENUES ORLOST PROFITS THAT MAY RESULT FROM THE USE OF THE MAT ERIALS ORINFORMATION,WHE THE RORNOT THE RECIPIENTOF MATERIALS HAS BEE N ADVISED OF THE POSSIBILITYOF SUCH DAMAG E. Skyworks productsarenotintendedforuse inme dical,lifesavingorlife-sustainingapplications,orotherequipmentinwhich thefailureoftheSkyw orksproducts couldleadtopersonalinjury, death,physicalorenvironmentaldam age.Skyworks custome rsusingorselling Skyworks productsforuse insuch applicationsdo so attheirow n riskand agreetofullyindemn ifySkyworks forany dam ages resultingfrom such improperuse orsale. Custom ersareresponsiblefortheirproducts and applications usingSkyw orksproducts,which may deviatefrom publishedspecificationsas a resultofdesigndefects,errors,oroperationof productsoutsideofpublishedparametersordesign specifications.Customers shouldincludedesignand operatingsafeguardsto minimizetheseand otherrisks.Skyworks assum es no liabilityfor applicationsassistance,customer productdesign,ordamage toany equipmentresultingfrom theuse ofSkywo rksproductsoutsideofstated published specificationsorparameters. Skyworks,theSkyw orkssymb ol,and “Breakthrough Simplicity”aretrademarksorregisteredtradema rks ofSkyworks Solutions,Inc.,inthe United States and othercountries.Third-partybrandsand names are foridentification purposes only,and are thepropertyoftheirrespective owners.Additionalinformation,includingrelevantterms and conditions,posted atww w.skyworksinc.com,are incorporated by reference.