AS196-307 SKYWORKS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

Features

  • Positive voltage control (0/3 to 0/5 V)
  • High isolation (55 dB @ 0.9 GHz and 1.9 GHz)
  • LPCC 4 x 4 mm package
  • Integrated silicon CMOS driver
  • Nonreflective
  • Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020

Description

The AS196-307 is a GaAs FET IC SPDT nonreflective switch packaged in a 16-lead exposed pad plastic package for low-cost, high-isolation commercial applications. Ideal building block for base station applications where synthesizer isolation is critical. Typical applications include GSM, PCS, WCDMA, 2.4 and 5.8 GHz ISM and wireless local loop. Parameter(1) Frequency Min. Typ. Max. Unit Insertion loss LF–2 GHz 0.9 1.15 dB LF–3 GHz 1.0 1.25 dB LF–4 GHz 1.2 1.40 dB LF–6 GHz 1.6 2.00 dB Isolation(2) LF–2 GHz 50 55 dB LF–3 GHz 43 50 dB LF–4 GHz 35 40 dB LF–6 GHz 25 30 dB VSWR (on state) LF–2 GHz 1.3:1 1.5:1 LF–6 GHz 1.3:1 1.6:1 VSWR (off state) 0.5–6 GHz 1.35:1 1.7:1 Electrical Specifications (0, 5 V) -40 °C to +85 °C 1. All measurements made in a 50 Ω system, unless otherwise specified. 2. Backside of exposed pad must be connected to RF ground to obtain specified isolation. Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. NEW Decoder CBL CBL VDD VCTL CBL Functional Block Diagram CBL = 47 pF for operation > 500 MHz. Innovation to GoTM Now available for purchase online. BUY NOW BUY NOW

Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com August 15, 2006  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  200126 Rev. D DATA SHEET • AS196-307, AS196-307LF VSWR, 25 °C VDD = 5 V, VCTL = 0/5 V VSWR Frequency (GHz) 0123456 1.0 1.2 1.4 1.6 1.8 2.0 Input On Output Off Output On 1. VDD must be powered on by a minimum of 10 ns prior to VCTL. Parameter Condition Frequency Min. Typ. Max. Unit Switching characteristics(1) Rise, fall 10/90% or 90/10% RF 30 ns On, off 50% CTL to 90/10% Rf 50 ns Video feedthru T RISE = 3 ns, BW = 500 MHz 25 mV Input power for 1 dB compression V CTL = 0/3 V 0.9–6 GHz 17 21 dBm VCTL = 0/5 V 0.9–6 GHz 24 27 dBm Intermodulation intercept point (IP3) For two-tone input power +8 dBm VCTL = 0/3 V 0.9–6 GHz 30 38 dBm VCTL = 0/5 V 0.9–6 GHz 38 46 dBm Thermal resistance 25 °C/W Control voltage Low (“0”) 0 0.5 V High (“1”) V DD–0.6 V DD V Control current V CTL = “0” or “1”. VDD = 2.6 to 5 V 5 µA Supply voltage V DD 2.6 3 5 V Supply current V DD = 3 V 10 50 µA VDD = 5 V 20 100 µA Operating Characteristics (0, 5 V) -40 °C to +85 °C Insertion Loss, 25 °C VDD = 5 V, VCTL = 0/5 V Insertion Loss (dB) Frequency (GHz) 01 23 45 6 -2.50 -2.25 -2.00 -1.75 -1.50 -1.25 -1.00 -0.75 -0.50 -0.25 J1–J2 J1–J3 Isolation, 25 °C VDD = 5 V, VCTL = 0/5 V Isolation (dB) Frequency (GHz) 0123456 -70 -60 -50 -40 -30 -20 -10 J1–J2 J1–J3 Typical Performance Data (0, 5 V)

DATA SHEET  AS196-307, AS196-307LF Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com 200126 Rev. D  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  August 15, 2006 3 Isolation, 85 °C VDD = 5 V, VCTL = 0/5 V Isolation (dB) Frequency (GHz) 0123456 -70 -60 -50 -40 -30 -20 -10 J1–J2 J1–J3 VSWR, 85 °C VDD = 5 V, VCTL = 0/5 V VSWR Frequency (GHz) 0123456 1.0 1.2 1.4 1.6 1.8 2.0 Input On Output Off Output On Insertion Loss, 85 °C VDD = 5 V, VCTL = 0/5 V Insertion Loss (dB) Frequency (GHz) 01 23 45 6 -2.50 -2.25 -2.00 -1.75 -1.50 -1.25 -1.00 -0.75 -0.50 -0.25 J1–J2 J1–J3 Insertion Loss, -40 °C VDD = 5 V, V = 0/5 V Insertion Loss (dB) Frequency (GHz) 01 23 45 6 -2.50 -2.25 -2.00 -1.75 -1.50 -1.25 -1.00 -0.75 -0.50 -0.25 J1–J2 J1–J3 Isolation, -40 °C VDD = 5 V, VCTL = 0/5 V Isolation (dB) Frequency (GHz) 0123456 -70 -60 -50 -40 -30 -20 -10 J1–J2 J1–J3 VSWR, -40 °C VDD = 5 V, VCTL = 0/5 V VSWR Frequency (GHz) 0123456 1.0 1.2 1.4 1.6 1.8 2.0 Input On Output Off Output On

Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com August 15, 2006  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  200126 Rev. D DATA SHEET  AS196-307, AS196-307LF “0” = 0–0.5 V. “1” = 3.5–5 V. V DD = 5 V. VCTL J1–J2 J1–J3

0 Insertion loss Isolation

1 Isolation Insertion loss

RF input power 1 W max. > 500 MHz, 0/8 V control Control voltage -0.2 V, +8 V Operating temperature -40 °C to +85 °C Storage temperature -65 °C to +150 °C Absolute Maximum Ratings Input Power Input Power @ 1 dB @ 0.1 dB Control Voltage Temperature Compression Compression (V) (°C) (dBm) (dBm) 3 -40 20.5 16.5 3 25 20 15.3 3 8 51 91 4 5 -40 28.5 23 5 2 52 82 3 5 85 27.5 23 Compression Point vs. Voltage and Temperature Frequency: 500 MHz. Control Voltage Temperature IP3 @ 5 dBm (V) (°C) Each T one (dBm) 3 -40 45.5 32 5 4 5 38 5 3 4 5 -40 45.5 5 25 45.5 5 85 40.5 IP3 vs. Voltage and Temperature Two tone input power: 5 dBm each tone. Tone frequencies: 900 and 901 MHz. Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce poten- tials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Recommended Solder Reflow Profiles Refer to the “Recommended Solder Reflow Profile” Application Note. Tape and Reel Information Refer to the “Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation” Application Note. GND N/C GND GND N/C N/C GND GND 1316 15 14 765 GND J2VCC VCTL GND GND Connect back side exposed paddle to ground Pin Out (Top View)

DATA SHEET  AS196-307, AS196-307LF Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com 200126 Rev. D  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  August 15, 2006 5 SK39110 REV 2 VCTL PCB Evaluation Board SP4T LPCC-16 (4 X 4 mm) VP 47 pF Capacitor

5 Places

PCB# SK39110. Material: FR4. The circuit board used in the final application should employ RF circuit design techniques. RF signal lines should have 50 Ω impedance. The package bottom ground plane should be connected directly to PCB ground plane. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available upon request. LPCC 4 x 4 (-307) Pin 1 Indicator Pin 1 0.026 (0.65 mm) BSC 0.110 (2.79 mm) ± 0.002 (0.05 mm) 0.110 (2.79 mm) ± 0.002 (0.05 mm) 0.076 (1.95 mm) BSC 0.076 (1.95 mm) BSC 0.016 (0.40 mm) Ref. 0.013 (0.325 mm) Ref. 0.157 (4.00 mm) ± 0.008 (0.20 mm) Sq. -B- -A- 0.10 0.015 (0.387 mm) Ref. 0.033 (0.85 mm) ± 0.004 (0.10 mm) Top View Bottom View

Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com August 15, 2006  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  200126 Rev. D DATA SHEET  AS196-307, AS196-307LF Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, “Breakthrough Simplicity” and “Innovation to Go” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third- party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.