AS193-000 SKYWORKS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

Features

  • 2.5 to 5 V linear operation
  • Harmonics H2,H 3 < -65 dBc @ PIN = 34.5 dBm
  • Low insertion loss (0.35 dB @ 0.9 GHz)
  • High isolation (24 dB @ 0.9 GHz)
  • Lead (Pb)-free, RoHS-compliant, and Green

Description

The AS193-000 is a PHEMT GaAs FET IC high-linearity SPDT switch. This switch has been designed for use where extremely high linearity, low control voltage, high isolation and low insertion loss are needed. Some standard implementations include antenna changeover, T/R and diversity switching over 3 W. The AS193-000 switch is ideal for GaAs based antenna switch front-end modules. Electrical Specifications at 25 °C (0, 3 V) 1. All measurements made in a 50 Ω system, unless otherwise specified. 2. Insertion loss changes by 0.003 dB/°C. 3. Insertion loss state. Functional Block Diagram Skyworks Green products are lead (Pb)-free, RoHS (Restriction of Hazardous Substances)- compliant, conform to the EIA/EICTA/JEITA Joint Industry Guide (JIG) Level A guidelines, and are free from antimony trioxide and brominated flame retardants. NEW

Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com January 09, 2007  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  200143 Rev. D DATA SHEET • AS193-000 VSWR vs. Frequency VSWR (dB) Frequency (GHz) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 Note: Contact factory for S-parameter data. Insertion Loss vs. Frequency Insertion Loss (dB) Frequency (GHz) -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 IL Isolation vs. Frequency Isolation (dB) Frequency (GHz) -50 -45 -40 -35 -30 -25 -20 -15 -10 Harmonics vs. Control Voltage PIN = 34.5 dBm, 900 MHz, GSM Pulsed VCTRL (V) H2, H3 (dBc) Typical Performance Data Parameter Condition Frequency Min. Typ. Max. Unit Switching characteristics Rise, fall 10/90% or 90/10% RF 60 ns On, off 50% CTL to 90/10% RF 100 ns Video feedthru T RISE = 1 ns, BW = 500 MHz 50 mV Input power for -0.1 dB compression V CTL = 0/3 V 0.9 GHz 37 dBm Harmonics H2,H 3 PIN = 34.5 dBm 0.9 GHz -65 dBc Thermal resistance 25 °C/W Control voltages V LOW = 0 to 0.2 V @ 20 µA max. VHIGH = 2.5 V @ 50 µA max. to 5 V @ 100 µA max. Operating Characteristics at 25 °C (0, 3 V)

DATA SHEET  AS193-000 Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com 200143 Rev. D  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  January 09, 2007 3 V1 V2 J1–J2 J1–J3 0V HIGH Isolation Insertion loss VHIGH 0 Insertion loss Isolation Truth Table All other conditions not recommended. VHIGH = 2.5 to 5 V. Bond-pad metallization: gold. Backside metallization: none. See application note, Handling GaAs MMIC Die. Characteristic Value RF input power 6 W max. > 900 MHz, 0/5 V control Control voltage -0.2 V, +8 V Operating temperature -40 °C to +85 °C Storage temperature -65 °C to +150 °C Absolute Maximum Ratings Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce poten- tials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Model Name Operating Temperature Range Ordering Part Number Package Description AS193-000 GaAs SPDT switch -40 °C to +85 °C AS193-000 Wafer on plastic-ring film frame

Ordering Information

0.0080 (0.020 mm) 0.0000 0.0196 (0.498 mm) 0.0224 (0.569 mm) 0.0194 (0.493 mm) 0.0030 (0.089 mm) 0.0000 0.0392 (0.996 mm) 0.0361 (0.917 mm) 0.0030 (0.089 mm) 0.0000 J3J2 V2J1V1 Dimensions in inches (mm). Tolerance ± 0.001 (0.025 mm). Bond-pad metallization: gold.

Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com January 09, 2007  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  200143 Rev. D DATA SHEET  AS193-000 Copyright © 2002, 2003, 2004, 2005, 2006, 2007, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.