AS192-000 SKYWORKS

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

Features

  • 4 symmetric RF paths
  • Positive voltage control
  • High IP3
  • Excellent harmonic performance
  • Handles GSM power levels
  • Available in 100% RF tested chip form
  • Available lead (Pb)-free, RoHS-compliant, and Green Simplified Schematic ANT

Description

The AS192-000 is a reflective SP4T switch. It is an ideal switch for higher power applications. It can be used for GSM dual-band handset applications where low loss, low current and small size are critical parameters. Parameter Frequency Min. Typ. Max. Unit Insertion loss Ant-J 1,J 2,J 3,J 4 0.1–0.5 GHz 0.90 1.1 dB 0.5–1.0 GHz 0.95 1.1 dB 1.0–2.0 GHz 1.00 1.2 dB 2.0–2.5 GHz 1.10 1.3 dB Isolation Ant-J 1,J 2,J 3,J 4 0.1–0.5 GHz 30 34 dB 0.5–1.0 GHz 25 29 dB 1.0–2.0 GHz 19 23 dB 2.0–2.5 GHz 18 21 dB VSWR 0.1–1.0 GHz 1.3:1 1.0–2.5 GHz 1.4:1 Electrical Specifications at 25 °C (0, +4.5 V) Skyworks Green products are lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-com pliant, conform to the EIA/EICTA/JEITA Joint Industry Guide (JIG) Level A guidelines, and are free from antimony trioxide and brominated flame retardants. NEW

Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com July 16, 2006  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  200144 Rev. B DATA SHEET • AS192-000 Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce poten- tials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. Typical Performance Data Characteristic Value RF input power 4 W > 0.5 GHz 0/+6 V control Control voltage +6 V Operating temperature -40 °C to +85 °C Storage temperature -65 °C to +150 °C Absolute Maximum Ratings Loss (dB) Frequency (GHz) Typical Insertion Loss vs. Frequency -2.0 -1.8 -1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -0.4 -0.2 VSWR Frequency (GHz) Typical VSWR 0.5 1.0 1.5 2.0 2.5 Isolation (dB) Frequency (GHz) Typical Isolation vs. Frequency -50 -45 -40 -35 -30 -25 -20 -15 -10 Parameter Condition Frequency Min. Typ. Max. Unit Switching characteristics Rise, fall (10/90% or 90/10% RF) 50 ns On, off (50% CTL to 90/10% RF) 100 ns Video feedthru 50 mV IP3 13 dBm/tone +55 dBm 2nd and 3rd harmonics 34 dBm input 900 MHz +65 dBc Control voltages V LOW = 0 VHIGH = +4.5 V @ 200 mA max. for RF power > 30 dBm VHIGH = +3.0 V @ 200 mA max. for RF power 20–30 dBm VHIGH = +2.7 V @ 200 mA max. for RF power < 20 dBm Operating Characteristics at 25 °C (0, +4.5 V)

DATA SHEET  AS192-000 Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com 200144 Rev. B  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  July 16, 2006 3 ANTV1 V2 V3 Pin Out Notes: DC blocking caps required on RF lines for positive voltage operation bond pad metalization: gold backside metalization: none bond pad dimensions: 0.003 (0.075 mm) x 0.003 (0.075 mm) See application note, Handling GaAs MMIC Die. V1 V2 V3 V4 Ant-J1 Ant-J2 Ant-J3 Ant-J4 VHIGH VLOW VLOW VLOW Ins. loss Isolation Isolation Isolation VLOW VHIGH VLOW VLOW Isolation Ins. loss Isolation Isolation VLOW VLow VHIGH VLOW Isolation Isolation Ins. loss Isolation VLOW VLOW VLOW VHIGH Isolation Isolation Isolation Ins. loss Truth Table VLOW = 0. VHIGH = 4.5 to 5.0 V for RF power > 30 dBm. VHIGH = 3.0 to 5.0 V for RF power 20–30 dBm. VHIGH = 2.7 to 5.0 V for RF power < 20 dBm. All other conditions not recommended. Model Name Operating Temperature Range Ordering Part Number Package Description AS192-000 GaAs SP4T switch -40 °C to +85 °C AS192-000 Wafer on plastic-ring film frame

Ordering Information

0.0417 (1.06 mm) 0.0387 (0.98 mm) 0.0261 (0.66 mm) 0.0209 (0.53 mm) 0.0156 (0.40 mm) 0.0030 (0.08 mm) 0.0000 (0.00 mm) 0.0000 (0.00 mm) 0.0031 (0.08 mm) 0.0045 (0.11 mm) 0.0337 (0.86 mm) 0.0351 (0.89 mm) 0.0382 (0.97 mm)

Skyworks Solutions, Inc.  Phone [781] 376-3000  Fax [781] 376-3100  sales@skyworksinc.com  www.skyworksinc.com July 16, 2006  Skyworks Proprietary Information  Products and Product Information are Subject to Change Without Notice.  200144 Rev. B DATA SHEET  AS192-000 Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.