APXE2R5ARA181ME61G CHEMI-CON
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
NIPPON CHEMI-CON CORPORATION 1213 1 Engineering Bulletin Conductive Polymer Aluminum Solid CapacitorsNo.750A / Sep.2004 Tentative Specifi cations in this bulletin are subject to change without notice. Please ask us for technical specifi cations before purchase and use. @Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. (ESR and rated ripple current values are improved from PXC series.) @Rated voltage range : 2.5 to 16Vdc, Capacitance range : 33 to 1,200MF @Case size range : F5B5.8L to F10B7.7L @Suitable for DC-DC converters, voltage regulators and decoupling applications used to computer motherboards etc. ?SPECIFICATIONS (at 20C, 120Hz) (at 105C) (at 20C after 2 minutes) (at 20C, 120Hz) (at 100kHz) Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance Bias Humidity Surge Voltage Failure Rate Items -55 to +105C 2.5 to 16Vdc P20% (M) Rated voltageB1.15V I=0.2CV (max.) I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V dc) 0.12 max. The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to the DC rated voltage at 60C, 90 to 95% RH for 500 hours. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial value DF (tanE) [150% of the initial specified value ESR [150% of the initial specified value Leakage current [The initial specified value 1% per 1000 hours maximum (Confidence level 60% at 105C) Characteristics ?PART NUMBERING SYSTEM ?DIMENSIONS [mm] FD P0.5 LP0.3 0.3max. AP0.2 W C P0.2 BP0.2 P Size Code E61 F61 F80 H70 H80 J80 fD 6.3 6.3 L 5.8 5.8 7.7 6.7 7.7 7.7 A 5.3 6.6 6.6 8.3 8.3 10.3 B 5.3 6.6 6.6 8.3 8.3 10.3 C 5.9 7.2 7.2 9.0 9.0 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.4 1.9 1.9 3.1 3.1 4.5 ?MARKING E49A 390 2.5V EX) 2.5V390MF *Note : If any doubt arises, measure the leakage current after following voltage treatment. Voltage treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105C. @Terminal Code : A Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47MF:470,100MF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category A P X E A A A A R A A A A A A A GM 13 4 26 7 8 9 1 0 51 2 1 3 11 16 17 18 1514 Feature! Pb Free Type
NIPPON CHEMI-CON CORPORATION 1213 Specifi cations in this bulletin are subject to change without notice. Engineering Bulletin Conductive Polymer Aluminum Solid CapacitorsNo.750A / Sep.2004 Tentative ?STANDARD RATINGS WV (Vdc) Cap (mF) Size code ESR (momax/20c, 100kHz) Rated ripple current (mArms/100k to 300kHz) -55 to +105c Part No. 2.5
180 E61 21 2670 AP XE2R 5ARA 181ME 61G
390 F61 15 3160 AP XE2R 5ARA 391M F61G
470 F80 13 3600 AP XE2R 5ARA 471M F80G
560 F80 13 3600 AP XE2R 5ARA 561M F80G
560 H 70 13 4100 AP XE2R 5ARA 561MH 70G
680 H 70 13 4100 AP XE2R 5ARA 681MH 70G
820 H 80 12 4260 AP XE2R 5ARA 821MH 80G
1000 H 80 12 4260 AP XE2R 5ARA 102MH 80G
1200 J80 13 4450 AP XE2R 5ARA 122M J80G
100 E61 22 2610 AP XE4R 0ARA 101ME 61G
150 E61 22 2610 AP XE4R 0ARA 151ME 61G
270 F61 15 3160 AP XE4R 0ARA 271M F61G
330 F61 15 3160 AP XE4R 0ARA 331M F61G
390 F80 14 3470 AP XE4R 0ARA 391M F80G
470 H 70 14 3950 AP XE4R 0ARA 471MH 70G
560 H 70 14 3950 AP XE4R 0ARA 561MH 70G
680 H 80 13 3950 AP XE4R 0ARA 681MH 80G
1000 J80 14 4300 AP XE4R 0ARA 102M J80G
6.3
100 E61 24 2500 AP XE6R 3ARA 101ME 61G
120 E61 24 2500 AP XE6R 3ARA 121ME 61G
220 F61 15 3160 AP XE6R 3ARA 221M F61G
270 F80 14 3470 AP XE6R 3ARA 271M F80G
330 F80 14 3470 AP XE6R 3ARA 331M F80G
(Vdc) Cap (mF) Size code ESR (momax/20c, 100kHz) Rated ripple current (mArms/100k to 300kHz) -55 to +105c Part No. 6.3
330 H 70 14 3950 AP XE6R 3ARA 331MH 70G
390 H 70 14 3950 AP XE6R 3ARA 391MH 70G
470 H 80 13 3950 AP XE6R 3ARA 471MH 80G
820 J80 14 4300 AP XE6R 3ARA 821M J80G
47 E61 28 2310 AP XE100ARA 470ME 61G
56 E61 28 2310 AP XE100ARA 560ME 61G
68 E61 28 2310 AP XE100ARA 680ME 61G
120 F61 25 2530 AP XE100ARA 121M F61G
150 F80 21 2880 AP XE100ARA 151M F80G
220 H 70 21 3220 AP XE100ARA 221MH 70G
270 H 70 21 3220 AP XE100ARA 271MH 70G
330 H 80 19 3390 AP XE100ARA 331MH 80G
470 J80 19 3800 AP XE100ARA 471M J80G
33 E61 35 2070 AP XE160ARA 330ME 61G
39 E61 35 2070 AP XE160ARA 390ME 61G
68 F61 28 2390 AP XE160ARA 680M F61G
82 F80 24 2700 AP XE160ARA 820M F80G
100 F80 24 2700 AP XE160ARA 101M F80G
100 H 70 24 3010 AP XE160ARA 101MH 70G
120 H 70 24 3010 AP XE160ARA 121MH 70G
150 H 80 22 3150 AP XE160ARA 151MH 80G
220 J80 22 3450 AP XE160ARA 221M J80G
?Recommended Refl ow Soldering Conditions 200 230 Peak 150 Preheat 120sec. max. Peak temperature Time (sec.) (C) Temperature on the top of capacitor and Temperature of capacitor terminal @R efl ow Profi le Method : Air or Infrated Refl ow [The times of refl ow soldering : once] Peak temperature : 250C max. M ax. period of time over 230C(T1) : 40 sec.max. M ax. period of time over 200C(T2) : 60 sec.max. Preheat : 150Cmax., 120 sec. max. [The times of refl ow soldering : twice] Peak temperature : 250C max. M ax. period of time over 230C(T1) : 30 sec.max. M ax. period of time over 200C(T2) : 50 sec.max. Preheat : 150Cmax., 120 sec. max. @C onditions ?Recommended Solder Land on PC Board c ba Solder land on PC board Size code E61 F61, F80 H70, H80 J80 a 1.4 1.9 3.1 4.5 b 3.0 3.5 4.2 4.4 c 1.6 1.6 2.2 2.2