APTC2012PBC KINGBRIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

z2.0mmx1.25mm SMT LED,0.75mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE : 2000PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS COMPLIANT. ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APTC2012PBC/A-F01 BLUE

Description

The Blue source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded.

SPEC NO: DSAG5976 REV NO: V.1 DATE: JUN/24/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI ERP:1203003788 Selection Guide Electrical / Optical Characteristics at TA=25°C Absolute Maximum Ratings at TA=25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 APTC2012PBC/A-F01 BLUE (InGaN) WATER CLEAR 18 60 120° Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Blue 468 nm IF=20mA λD [1] Dominant Wavelength Blue 470 nm IF=20mA Δλ1/2 Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V.

SPEC NO: DSAG5976 REV NO: V.1 DATE: JUN/24/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI ERP:1203003788 Blue APTC2012PBC/A-F01

SPEC NO: DSAG5976 REV NO: V.1 DATE: JUN/24/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI ERP:1203003788 Tape Specifications (Units : mm) APTC2012PBC/A-F01 Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1)

SPEC NO: DSAG5976 REV NO: V.1 DATE: JUN/24/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI ERP:1203003788 PACKING & LABEL SPECIFICATIONS APTC2012PBC/A-F01