APT1608SEC-J4-AMT_15 KINGBRIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 6
Technical content
Features
High reliability LED package. 1.6mmx0.8mm SMT LED,0.75mm thickness Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Package: 2000pcs / reel . Moisture sensitivity level : level 3. RoHS compliant. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
Description
The Orange source color devices are made with AlGaInP Light Emitting Diode.
SPEC NO: DSAL3995 REV NO: V.2A DATE: JAN/23/2015 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203012228 Selection Guide Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2.Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Code. Min. Max. 2 θ1/2 APT1608SEC/J4-AMT Super Bright Orange (AlGaInP) Water Clear W 1600 1900 120° X 1900 2300 Y 2300 2700 Z 2700 3100 *R *400 *500 *S *500 *700 *T *700 *1000 *U *1000 *1300 Absolute Maximum Ratings at Ta=25°C Notes: 1. Rth(j-a) Results from mounting on PC board FR4 (pad size ≥16 mm 2 per pad), 2. 1/10 Duty Cycle, 0.1ms Pulse Width. Parameter Symbol Value Unit Power dissipation PD 84 mW Reverse Voltage VR 5 V Junction temperature TJ 115 °C Operating Temperature Top -40 To +100 °C Storage Temperature Tstg -40 To +115 °C DC Forward Current[1] IF 30 mA Peak Forward Current [2] IFM 150 mA Electrostatic Discharge Threshold (HBM) 3000 V Thermal Resistance (Junction/ambient) [1] Rth j-a 460 °C/W Electrical / Optical Characteristics at Ta=25°C Parameter Symbol Value Unit Wavelength at peak emission IF=20mA [Typ.] peak 611 nm Dominant Wavelength IF=20mA [Min.] dom [1] 598 nm Dominant Wavelength IF=20mA [Max.] dom [1] 612 nm Spectral bandwidth at 50% REL MAX IF=20mA [Typ.] 17 nm VF [2] V Forward Voltage IF=20mA [Typ.] 2.2 Forward Voltage IF=20mA [Max.] 2.8 Reverse Current (VR = 5V) [Max.] IR 10 uA Temperature coefficient of peak IF=20mA, -10 C≤ T≤100 C [Typ.] TC peak 0.12 nm/ C Temperature coefficient of dom IF=20mA, -10 C≤ T≤100 C [Typ.] TC dom 0.08 nm/ C Temperature coefficient of VF IF=20mA, -10 C≤ T≤100 C [Typ.] TCV -1.8 mV/ C Notes: 1.The dominant Wavelength (d) above is the setup value of the sorting machine. (Tolerance d : ±1nm. ) 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. 4.Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
SPEC NO: DSAL3995 REV NO: V.2A DATE: JAN/23/2015 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203012228 Super Bright Orange APT1608SEC/J4-AMT
SPEC NO: DSAL3995 REV NO: V.2A DATE: JAN/23/2015 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203012228 APT1608SEC/J4-AMT Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product.
SPEC NO: DSAL3995 REV NO: V.2A DATE: JAN/23/2015 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203012228 PACKING & LABEL SPECIFICATIONS APT1608SEC/J4-AMT Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
SPEC NO: DSAL3995 REV NO: V.2A DATE: JAN/23/2015 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Q.M.Chen ERP: 1203012228 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standards Test Condition Test Times / Cycles Number of Damaged
1 Continuous operating test - Ta =25°C ,IF = maximum rated current* 1,000 h 0 / 22
2 High Temp. operating test EIAJ ED- 4701/100(101) Ta = 100°C IF = derated current at 100°C 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current* 1,000 h 0 / 22 4 High temp. storage test EIAJ ED- 4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22 5 Low temp. storage test EIAJ ED- 4701/100(202) Ta = -40°C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJ ED- 4701/100(103) Ta = 60°C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJ ED- 4701/100(102) Ta = 60°C, RH = 90% IF = derated current at 60°C 1,000 h 0 / 22
8 Soldering reliability test EIAJ ED-
4701/100(301) Moisture soak : 30°C,70% RH, 72h Preheat : 150~180°C(120s max.) Soldering temp : 260°C(10s) 2 times 0 / 18
9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)
IF = derated current at 100°C 1,000 cycles 0 / 22
10 Thermal shock test - Ta = -40°C(15min) ~ 100°C(15min) 1,000 cycles 0 / 22
11 Electric Static Discharge (ESD) EIAJ ED-
4701/100(304) C = 100pF , R2 = 1.5KΩ V = 3000V Once each Polarity 0 / 22
12 Vibration test - a = 196m/s² , f = 100~2KHz ,
t = 48min for all xyz axes 4 times 0 / 22 * : Refer to forward current vs. derating curve diagram Items Symbols Conditions Failure Criteria luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value ≥Spec.Max.Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value ≥Spec.Max.Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking Failure Criteria