APT1608F3C_0706 KINGBRIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

z 1.6mmX0.8mm SMT LED, 0.75mm THICKNESS. z MECHANICALLY AND SPECTRALLY MATCHED TO PHOTOTRANSISTOR. z WATER CLEAR LENS. z PACKAGE: 2000PCS / REEL . z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT.

Description

F3 Made with Gallium Arsenide Infrared Emitting diodes. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.

SPEC NO: DSAH3781 REV NO: V.2 DATE: JUN/07/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203001654 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Radiant Intensity/ luminous flux: +/-15%. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Note: 1. Forward Voltage: +/-0.1V. Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Viewing Angle [1] Min. Typ. 2θ1/2 APT1608F3C F3 (GaAs) WATER CLEAR 0.4 1.2 120° Po (mW/sr) [2] @ 20mA Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage [1] F3 VF 1.2 1.6 V IF=20mA Reverse Current F3 IR 10 uA VR = 5V Capacitance F3 C 90 pF VF=0V;f=1MHz Peak Spectral Wavelength F3 λP 940 nm IF=20mA Spectral Bandwidth F3 Δλ1/2 50 nm IF=20mA Parameter Symbol F3 Units Power dissipation PT 80 mW DC Forward Current IF 50 mA Peak Forward Current [1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 °C Storage Temperature TSTG -40 To +85 °C

SPEC NO: DSAH3781 REV NO: V.2 DATE: JUN/07/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203001654 APT1608F3C

SPEC NO: DSAH3781 REV NO: V.2 DATE: JUN/07/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203001654 APT1608F3C Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm)

SPEC NO: DSAH3781 REV NO: V.2 DATE: JUN/07/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1203001654 PACKING & LABEL SPECIFICATIONS APT1608F3C