APSK2R5ELL221 CHEMI-CON
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Radial Lead NPCAP TM -PSKSeries ・Super low ESR, high ripple current capability ・Downsized from PSE series (φ6.3×8L to φ5×8L) ・Long life (20,000 hours at 105℃) ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ・Halogen Free ◆SPECIFICATIONS Items Characteristics Category Temperature Range -55 to +105℃ Rated Voltage Range 2.5 to 6.3 Vdc Capacitance Tolerance ±20% (M) (at 20℃, 120Hz) Surge Voltage Rated voltage(V)×1.15 (at 105℃) Leakage Current*Note 500µA max. (at 20℃ after 2 minutes) Dissipation Factor (tanЎ) 0.10 max. (at 20℃, 120Hz) Low Temperature Characteristics (Max.Impedance Ratio) Endurance The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 20,000 hours at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to DC voltage at 60℃, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦The initial specified value ESR ≦The initial specified value Leakage current ≦The initial specified value Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] Coated Case L' 15min. 4min. φD' φd F±0.5 Terminal Code : E● Size code φD φd F φD' E08 5.0 0.5(Note2) 2.0 φD+0.5max. L+1.0max. Note2 : 0.45 for rated vollage 2.5V Downsized PSK PSE P56 ◆MARKING K6D6 560 2.5V EX) 2.5V560µF CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. Radial Lead NPCAP TM -PSKSeries ◆PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560µF:561) Terminal code Series code Category A P S K E A A 5 6 1 E 0 8 SM 1 3 42 6 7 8 9 10 13125 18171611 1514 Please refer to "Product code guide (conductive polymer type)" Lead forming.Taping code Voltage code (ex. 2.5V:2R5, 6.3V:6R3) ◆STANDARD RATINGS WV (Vdc) Cap (µF) Case size ПDʷL (mm) ESR (mЊ max./20ˆ, 100k to 300kHz) Rated ripple current (mArms/105ˆ, 100kHz) Part No. 2.5 220 5×8 7 4,350 APSK2R5E□□221ME08S 330 5×8 7 4,350 APSK2R5E□□331ME08S 470 5×8 7 4,350 APSK2R5E□□471ME08S 560 5×8 7 4,350 APSK2R5E□□561ME08S 4 330 5×8 8 4,050 APSK4R0E□□331ME08S 6.3 270 5×8 10 3,700 APSK6R3E□□271ME08S 330 5×8 8 4,050 APSK6R3E□□331ME08S □□ : Enter the appropriate lead forming or taping code. CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS