APSE6R3ELL471 CHEMI-CON

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

NIPPON CHEMI-CON CORPORATION 1435 1 Engineering Bulletin Conductive Polymer Aluminum Solid CapacitorsNo.795 / Apr.2008 Specifi cations in this bulletin are subject to change without notice. @Super low ESR, high ripple current capability @Downsized from PSC series (F8B8L to F6.3B8L) @Endurance is longer life than PSC series (5,000 hours at 105C) @ESR after endurance is specifi ed within the initial spec @Rated voltage range : 2.5 to 6.3Vdc @RoHS Compliant @Halogen Free ?SPECIFICATIONS (at 20C, 120Hz) (at 105C) (at 20C after 2 minutes) (at 20C, 120Hz) (at 100kHz) Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current *Note Dissipation Factor (tane) Low Temperature Characteristics (Max.Impedance Ratio) Endurance Bias Humidity Test Surge Voltage Test Halogen Free (Definition) Failure Rate Items -55 to +105C 2.5 to 6.3Vdc P20% (M) Rated voltage(V)B1.15 I=0.2CV or 500MA, whichever is greater Where, I : Leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) 0.10 max. The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [The initial specified value ESR [The initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [The initial specified value ESR [The initial specified value Leakage current [The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [The initial specified value ESR [The initial specified value Leakage current [The initial specified value All homogeneous materials within a capacitor meet the criteria in Table-1 and Tabel-2. Homogeneous material has uniform composition throughout and cannot be mechanically disjointed into different materials. Table-1 Substance Bromine (Br) Chlorine (Cl) Total concentration of Chlorine (Cl) + Bromine (Br) 0.5% per 1,000 hours maximum (Confidence level 60% at 105C) Characteristics Permissible limit (by weight) [900ppm (0.09%) [900ppm (0.09%) [1,500ppm (0.15%) Permissible limit (by weight) [1,000ppm (0.10%) [1,000ppm (0.10%) Table-2 Substance Antimony Trioxide (Sb 2O 3) Red Phosphorus ?DIMENSIONS [mm] ?MARKING *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. Size code fD fd F fD' F08 6.3 0.6 2.5 FD+0.5max. L+1.5max. Coated Case L' 15min. 4min. FD' Fd FP0.5 E 6D6 820 2.5V EX) 2.5V820MF @Terminal Code : E Halogen Free Downsized Long Life

Aluminum Solid CapacitorsNo.795 / Apr.2008 NIPPON CHEMI-CON CORPORATION Specifi cations in this bulletin are subject to change without notice. 1435 2 ?PART NUMBERING SYSTEM Supplement code Size code Capacitance tolerance code Capacitance code (ex. 820MF:821) Lead forming·Taping code Terminal code Voltage code (ex. 2.5V:2R5, 4V:4R0, 6.3V:6R3) Series code Category A P S E 2 R 5 E A A 5 6 1 F 0 8 SM 13 4 26 7 8 9 1 0 51 2 1 3 11 16 17 18 1514 ?STANDARD RATINGS SS : Enter the appropriate lead forming or taping code. WV(V dc) Cap( mF) Case size fD bL(mm) ESR (mo max./20c, 100k to 300kHz) Rated ripple current (mArms/105 c, 100kHz) Part No. 2.5 820 6.3 B8 7 5,000 APSE2R5E SS821MF08S 4 560 6.3 B8 7 5,000 APSE4R0E SS561MF08S 6.3 470 6.3 B8 8 4,700 APSE6R3E SS471MF08S 560 6.3 B8 8 4,700 APSE6R3E SS561MF08S