APL3015F3C-F01 KINGBRIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
Features
/G7A3.0mmx1.5mm SMT LED, 1.4mm THICKNESS. /G7AMECHANICALLY AND SPECTRALLY MATCHED TO THE PHOTOTRANSISTOR. /G7AWATER CLEAR LENS. /G7APACKAGE : 2000PCS / REEL. /G7ARoHS COMPLIANT. Package Dimension s Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. APL3015F3C -F01
Description
F3 Made with Gallium Arsenide Infrared Emitting diodes.
SPEC NO: DSAF1073 REV NO: V.1 DATE: MAR/15/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP: 1203001568-01 Selection Guide Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA =25°C Absolute Maximum Ratings at TA =25°C Note: 1. 1/100 Duty Cycle, 10us Pulse Width. Part No. Dice Lens Type Po (mW/sr) @ 20mA Viewing Angle Min. Typ. 2θ1/2 APL3015F3C -F01 GaAs WATER CLEAR 0.4 1.2 70° Item P/N Symbol Typ. Max. Units Test Conditions Forward Voltage F3 VF 1.2 1.6 V IF=20mA Reverse Current F3 IR - 10 uA VR =5V Capacitance F3 C 90 - pF VF=0V;f=1MHz Peak Spectral Wavelength F3 λP 940 - nm IF=20mA Spectral Bandwidth F3 ∆λ 1/2 50 - nm IF=20mA Parameter Symbol F3 Units Power Dissipation PT 100 mW DC Forward Current IF 50 mA Peak Forward Current[1] iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 °C Storage Temperature TSTG -40 To +85 °C
SPEC NO: DSAF1073 REV NO: V.1 DATE: MAR/15/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP: 1203001568-01 APL3015F3C -F01
SPEC NO: DSAF1073 REV NO: V.1 DATE: MAR/15/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP: 1203001568-01 APL3015F3C -F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) If special sorting is required (e.g. binning based on forward voltage or radiant intensity), the typical accuracy of the sorting process is as follows: 1. Radiant Intensity: +/-15% 2. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.