APKA2810MGC KINGBRIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 5
Technical content
Features
2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm THICKNESS. LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT.
Description
The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. APKA2810MGC MEGA GREEN
SPEC NO: DSAD1132 REV NO: V.3 DATE: JUN/30/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000419 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2θθθθ1/2 APKA2810MGC MEGA GREEN (InGaAlP) WATER CLEAR 18 70 90 ° Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Mega Green 574 nm IF=20mA λD Dominant Wavelength Mega Green 568 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR = 5V Parameter Mega Green Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C
SPEC NO: DSAD1132 REV NO: V.3 DATE: JUN/30/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000419 Mega Green APKA2810MGC
SPEC NO: DSAD1132 REV NO: V.3 DATE: JUN/30/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000419 Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) APKA2810MGC
SPEC NO: DSAD1132 REV NO: V.3 DATE: JUN/30/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1204000419 PACKING & LABEL SPECIFICATIONS APKA2810MGC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters.