APJA2107SYC KINGBRIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
Features
/G7A2.1mmx0.7mm RIGHT ANGLE SMT LED, 1.3mm THICKNESS. /G7ALOW POWER CONSUMPTION. /G7AWIDE VIEWING ANGLE. /G7AIDEAL FOR BACKLIGHT AND INDICATOR. /G7AVARIOUS COLORS AND LENS TYPES AVAILABLE. /G7APACKAGE : 2000PCS / REEL. /G7ARoHS COMPLIANT. 2.1x0.7 mm RIGHTANGLE SMD CHIP LED LAMP APJA2107SYC SUPER BRIGHT YELLOW
Description
The Super Bright Yellow device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip.
SPEC NO: DSAD1029 REV NO: V.3 DATE: MAR/12/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203001553 Selection Guide Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA =25°C Absolute Maximum Ratings at TA =25°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2 θ 1/2 APJA2107SYC SUPER BRIGHT YELLOW (InGaAlP) WATER CLEAR 36 120 120° Symbol Parameter Device Typ. Max. Test ConditionsUnits λpeak Peak Wavelength Super Bright Yellow 590 nm IF=20mA λD Dominant Wavelength Super Bright Yellow 588 nm IF=20mA ∆λ 1/2 Spectral Line Half-width Super Bright Yellow 28 nm IF=20mA C Capacitance Super Bright Yellow 25 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Parameter Super Bright Yellow Units Power dissipation 125 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C
SPEC NO: DSAD1029 REV NO: V.3 DATE: MAR/12/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203001553 Super Bright Yellow APJA2107SYC
SPEC NO: DSAD1029 REV NO: V.3 DATE: MAR/12/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1203001553 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) APJA2107SYC Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength), the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard).