APJA2107SECK KINGBRIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

2.1mmx0.7mm RIGHT ANGLE SMT LED, 1.3mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. 2.1x0.7mm RIGHT ANGLE SMD CHIP LED LAMP

SPEC NO: DSAD1027 REV NO: V.5 DATE: JUN/29/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ER P: 1203001534 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2θθθθ1/2 APJA2107SECK SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 50 250 120 ° Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Super Bright Orange 610 nm IF=20mA λD Dominant Wavelength Super Bright Orange 601 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C

SPEC NO: DSAD1027 REV NO: V.5 DATE: JUN/29/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ER P: 1203001534 Super Bright Orange APJA2107SECK

SPEC NO: DSAD1027 REV NO: V.5 DATE: JUN/29/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ER P: 1203001534 Tape Specifications (Units : mm ) APJA2107SECK Recommended Soldering Pattern (Units : mm ) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters.

SPEC NO: DSAD1027 REV NO: V.5 DATE: JUN/29/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ER P: 1203001534 PACKING & LABEL SPECIFICATIONS APJA2107SECK