APJA2107MGC KINGBRIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 5
Technical content
Features
2.1mmx0.7mm RIGHT ANGLE SMT LED, 1.3mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. 2.1x0.7 mm RIGHT ANGLE SMD CHIP LED LAMP APJA2107MGC MEGA GREEN
Description
The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode.
SPEC NO: DSAD1032 REV NO: V.4 DATE: JUN/30/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203001508 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2 θ θ θ θ 1/2 APJA2107MGC MEGA GREEN (InGaAlP) WATER CLEAR 36 80 120 ° Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Mega Green 574 nm IF=20mA λD Dominant Wavelength Mega Green 568 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Mega Green 26 nm IF=20mA C Capacitance Mega Green 20 pF VF=0V;f=1MHz VF Forward Voltage Mega Green 2.1 2.5 V IF=20mA IR Reverse Current Mega Green 10 uA VR = 5V Parameter Mega Green Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C
SPEC NO: DSAD1032 REV NO: V.4 DATE: JUN/30/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203001508 Mega Green APJA2107MGC
SPEC NO: DSAD1032 REV NO: V.4 DATE: JUN/30/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203001508 Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) APJA2107MGC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAD1032 REV NO: V.4 DATE: JUN/30/2005 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203001508 PACKING & LABEL SPECIFICATIONS APJA2107MGC