APGA1602QWF-KA-5MAV KINGBRIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
© 2017 Kingbright. All Rights Reserved. Spec No: DSAN2012 / 1203013701 Rev No: V.7B Date: 04/29/2017 Page 1 / 4 DESCRIPTIONS z The source color devices are made with InGaN on Sapphire-substrate Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded
FEATURES
z 1.6 x 0.9 x 0.2 mm right angle SMD LED, 0.2mm thickness z Low power consumption z Wide viewing angle z Ideal for backlight and indicator z Package: 4000 pcs / reel z Moisture sensitivity level: 3 z Tinned pads for improved solderability z RoHS compliant
APPLICATIONS
z Home and smart appliances z Wearable and portable devices z Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS SELECTION GUIDE Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Part Number Emitting Color (Material) Lens Type Iv (mcd) @ 5mA [2] Viewing Angle [1] Min. Typ. 2θ1/2 APGA1602QWF/KA-5MAV Yellow Fluorescent ■ White (InGaN) 20 60 150° APGA1602QWF/KA-5MAV 1.6 x 0.2 mm Right Angle SMD Chip LED Lamp RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAN2012 / 1203013701 Rev No: V.7B Date: 04/29/2017 Page 2 / 4 ABSOLUTE MAXIMUM RATINGS at TA=25°C ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C APGA1602QWF/KA-5MAV Notes: 1. Measurement tolerance of the chromaticity coordinates is ±0.01. 2. Forward voltage: ±0.1V. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Parameter Symbol Emitting Color Value Unit Typ. Max. Chromaticity Coordinates x IF = 5mA x [1] White 0.31 - Chromaticity Coordinates y I F = 5mA y [1] White 0.31 - Forward Voltage IF = 5mA VF [2] White 2.8 3.2 V Reverse Current (VR = 5V) IR White - 50 uA Parameter Symbol Value Unit Power Dissipation PD 70 mW Reverse Voltage VR 5 V Junction Temperature Tj 115 °C Operating Temperature Top -40 to +85 °C Storage Temperature Tstg -40 to +100 °C DC Forward Current IF 20 mA Peak Forward Current IFM [1] 100 mA Electrostatic Discharge Threshold (HBM) - 250 V
© 2017 Kingbright. All Rights Reserved. Spec No: DSAN2012 / 1203013701 Rev No: V.7B Date: 04/29/2017 Page 3 / 4 TECHNICAL DATA WHITE 0.50.5 0.0 -90° -75° -60° -45° -30° -15° 75° 60° 45° 30° 0° 15° 90° 1.01.0 Ta = 25 °C SPATIAL DISTRIBUTION Ta = 25 °C Forward voltage (V) Forward current (mA) 0.0 1.0 2.0 3.0 4.0 5.0 0 5 10 15 20 25 Ta = 25 °C Forward current (mA) Luminous intensity normalised at 5 mA - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Permissible forward current (mA) 0.0 0.5 1.0 1.5 2.0 2.5 - 4 0 - 2 0 0 2 04 06 08 0 1 0 0 Ambient temperature (°C) Luminous intensity normalised at T a = 25 °C Forward Current vs. Forward Voltage Luminous Intensity vs. Forward Current Forward Current Derating Curve Luminous Intensity vs. Ambient Temperature APGA1602QWF/KA-5MAV White CIE x y x y 0.263 0.213 0.282 0.245 0.282 0.245 0.298 0.271 0.265 0.265 0.286 0.299 0.242 0.226 0.265 0.265 0.298 0.271 0.313 0.296 0.313 0.296 0.329 0.325 0.306 0.332 0.329 0.371 0.286 0.299 0.306 0.332 0.329 0.325 0.358 0.372 0.363 0.400 0.329 0.371 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. 0.20 0.25 0.30 0.35 0.40 x y
© 2017 Kingbright. All Rights Reserved. Spec No: DSAN2012 / 1203013701 Rev No: V.7B Date: 04/29/2017 Page 4 / 4 APGA1602QWF/KA-5MAV PACKING & LABEL SPECIFICATIONS TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference on ly. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application ha s special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes