Download PDFAPD0505-000 SKYWORKS
Document overview
- PDF pages: 4
Technical content
Page 1
DATA SHEET
APD Series: Silicon PIN Diode Chips
Features
G Established Skyworks PIN diode process G For switch and attenuator applications G Low capacitance designs to 0.05 pF G Voltage ratings to 100 V G Chip size smaller than 15 mils square G Available lead (Pb)-free, RoHS-compliant, and Green
Description
Skyworks APD Series of silicon PIN diode chips is designed for use as switch and attenuator devices in high-performance hybrid microwave integrated circuits. These PIN diode designs are useful over a wide range of frequencies from below 100 MHz to beyond 30 GHz. These devices utilize Skyworks well-established silicon technology resulting in high resistivity and tightly controlled I region width PIN diodes. APD0505-00 through APD0810-000 are primarily designed for fast speed through moderate speed switch applications. They have low resistance and capacitance at zero bias and reverse bias. The thick I region APD2220-000 is primarily designed for low-distortion attenuator
applications.
NEW Skyworks Green products are lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant, conform to the EIA/EICTA/JEITA Joint Industry Guide (JIG) Level A guidelines, and are free from antimony trioxide and brominated flame retardants.
Absolute Maximum Ratings
| Characteristic | Value |
| Power dissipation | 175-Tamb Pdiss = W θ |
| Operating temperature | -65 °C to +175 °C |
| Storage temperature | -65 °C to +200 °C |
Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times.
200075 Rev. F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 26, 2007
Page 2
Electrical Specifications at 25 °C
| Part Number | Capacitance VR = 50 V, 1 MHz (pF) | Capacitance VR = 0 V, 1 MHz (pF) | RS I = 10 mA, 500 MHz (Ω) | TL I = 10 mA (ns) | Voltage Rating IR = 10 µA (V) | I Region (µm) | Thermal Resistance (°C/W) | Contact Diameter (Mils) | Outline Drawing |
|---|---|---|---|---|---|---|---|---|---|
| Max. | Typ. | Max. | Typ. | Min. | Nom. | Max. | Nom. | ||
| Switching Applications | |||||||||
| APD0505-000 | 0.05 | 0.1 | 2 | 20 | 50 | 5 | 100 | 1.5 | 150-806 |
| APD0510-000 | 0.1 | 0.2 | 1.5 | 40 | 50 | 5 | 80 | 2.5 | 150-801 |
| APD0520-000 | 0.2 | 0.25 | 1 | 50 | 50 | 5 | 80 | 3.5 | 150-801 |
| APD0805-000 | 0.05 | 0.1 | 2 | 100 | 100 | 8 | 80 | 2 | 150-801 |
| APD0810-000 | 0.1 | 0.15 | 1.5 | 160 | 100 | 8 | 60 | 3 | 150-801 |
| APD1510-000 | 0.1 | 0.2 | 2 | 300 | 200 | 15 | 60 | 3 | 150-813 |
| APD1520-000 | 0.2 | 0.25 | 1.2 | 900 | 100 | 15 | 30 | 4 | 150-802 |
| Attenuator Applications | |||||||||
| APD2220-000 | 0.2 | 0.2 | 4 | 700 | 100 | 50 | 80 | 7.5 | 149-815 |
Typical Performance Data
0.01 0.1 1 10 100
Forward Current (mA)
Resistance vs. Forward Current @ 1 GHz
0.01 0.1 1 10 100
Forward Current (mA)
Resistance vs. Forward Current @ 1 GHz
July 26, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200075 Rev. F
Page 3
Outline Drawings
149-815
150 Series
Anode Metallized Gold Dot 0.002 (0.051 mm) Min. Dia.
(0.350 ± 0.025 mm)
0.004 (0.127 mm) Min. 0.006 (0.152 mm) Max.
Contact: Gold
0.002 (0.051 mm) Min. 150-806: 0.0011 (0.028 mm) Min.
0.004 (0.127 mm) Min. 0.006 (0.152 mm) Max.
Silicon
Cathode Metallized Back Contact: Gold
200075 Rev. F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • July 26, 2007
Page 4
Copyright © 2002, 2003, 2004, 2005, 2006, 2007, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
July 26, 2007 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200075 Rev. F